Journals Monographies Textbooks Collections Authors
Submit manuscript
Home / Journals / Science intensive technologies in mechanical engineering / Rubric Technologies of mechanical processing of workpieces

Articles of rubric " TECHNOLOGIES OF MECHANICAL PROCESSING OF WORKPIECES " of journal " SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING "

EVALUATION OF THE DYNAMICS OF THE METAL TURNING PROCESS BASED ON MEASUREMENTS TAKEN FROM THE CUTTING TOOL
THE EFFECT OF TEETH PITCH DIVERSITY OF FACE MILLING CUTTER ON THE DYNAMIC STABILITY OF A NON-RIGID MANUFACTURING SYSTEM
PARTS PRODUCTION UPGRADING THROUGH A COMBINATION OF DESIGNER AND PRODUCT EN-GINEER'S JOINT WORK PARALLELED
A COMPREHENSIVE APPROACH TO THE APPLICATION OF TYPES OF TECHNOLOGY
METHODS OF ULTRASONIC SURFACE PLASTIC DEFORMATION
MODELING AND MANAGEMENT OF GRINDING PROCESS ACCURACY
MODELLING OF TOOL AND PIECE PART RELATIVE MOTION EFFECT ON MATERIAL REMOVAL IN INTERNAL CYLINDRICAL GRINDING
EVALUATION OF THE INFLUENCE OF A WEAR-RESISTANT COATING ON THE PROCESS OF TURNING A TITANIUM ALLOY
EFFICIENCY UPGRADING OF GRINDING WHEELS ON A RESINOID BOND BY CONTROLLING THE STRUC-TURE FORMATION AT DIFFERENT STAGES OF THE TECHNOLOGICAL PROCESS OF THEIR PRODUCTION
WAVINESS OF FLAT SURFACES GRINDED BY THE PERIPHERY OF THE COMBINED TOOL
INVESTIGATION OF THE STRESSED STATE OF A CARBIDE TOOL DURING TURNING OF RAILWAY WHEELS
ABRASIVE-BELT CREEP FEED GRINDING AS A PROGRESSIVE TYPE OF MACHINING OPERATION
PROCESS PARAMETERS SURVEY IN MILLING WITH VARIOUS TOOTH CUTTERS
METHODOLOGY FOR THE STUDY OF VIBRATION PROCESSESS IN MILLING OPERATIONS
STUDY CASE OF THE LOAD SHAPING IN THREADED FASTENING TURNS AND TECHNIQUE ANALYSIS OF THE WAYS FOR ENSURING BALANCING LOAD
MEASUREMENT OF CUTTING FORCE AND TORQUE DURING THREAD MILLING
VALUE ELASTICITY ESTIMATION IN PENDULUM SURFACE PLASTIC DEFORMATION
DESIGN TECHNIQUES FOR TURNING OPERATIONS IN SHELL CASINGS PROCESSING
DETERMINING DEMANDS OF PARTS PRODUCTION TECHNIQUES
PECULIARITIES OF TOOL DESIGN FOR PHYSICAL MODELING OF SHAVING-ROLLING CYLINDRICAL GEAR-WHEELS
THRUST FORCE INCUT USING SPHERICAL HEAD CUTTER
THE DEVELOPMENT OF ENGINEERING SUPPORT FOR LOOSE ABRASIVE WORKING METHODS
COMPUTER SIMULATION TECHNIQUE FOR DRILLING PROCESS OF TITANIUM ALLOY AND COMPOSITE MATERIAL COMPLEX PACKAGES USING DIGITAL TWINS
DESIGN OF MECHATRONIC SYSTEMS OF HYBRID MACHINE COMPLEXES
DESIGN OF PROCESSING TECHNOLOGY IN GRANULATED MEDIA IN THE CONDITIONS OF DIGITAL PRODUCTION
CALCULATION OF HIGH-DUTY COLD REDUCTION ROLLERS GRINDING CYCLES BASED ON RADIAL FORCE CYCLE OPTIMIZATION
ORGANIZATION OF SMALL-SCALE PRODUCTION OF PARTS BASED ON MODULE TECHNOLOGY PATTERNS
MULTIPLE-CRITERIA OPTIMIZATION OF OPERATIONAL MODES OF TECHNOLOGICAL PROCESSES
STUDY OF THE TECHNIQUE PERFORMANCE FOR THE CORRECTION OF THE MODE OF THE MACHINING PROCESS WITH TIME-VARYING PARAMETERS IN THE CONDITIONS OF TECHNOLOGICAL INFORMATION UNCERTAINTY
THE DEVELOPMENT OF COMPUTER-AIDED PLANNING PRINCIPLES FOR MULTIPRODUCT MACHINING PROCESSES
INVESTIGATION OF MODE ELEMENTS EFFECT AND THE INFLUENCE OF MILLING CUTTER TEETH SPACE ON TECHNOLOGICAL PARAMETERS AND TEMPERATURE FIELD OF WORK ON A THIN-WALLED PARTS WORKPIECE
INFLUENCE OF REVERSIBLE SURFACE PLASTIC DEFORMATION PARAMETERS ON THE PARAMETERS OF THE SURFACE WAVINESS OF CYLINDRICAL PARTS
AN ARRAY OF QUESTIONS RELATED TO NEW TECHNOLOGIES FOR MANUFACTURING NON-RIGID THIN-SHELL FLAT PARTS MADE OF AIRCRAFT MATERIALS IS VIEWED. TO REDUCE POSSIBLE DEFORMATIONS AND IMPROVE THE QUALITY, IT HAS BEEN SUGGESTED THAT THE ENERGY OF A MODULATED ULTRASONIC FIELD SHOULD BE USED
INVESTIGATION OF FORM DEVIATIONS OF HIGH-SPEED STEEL (HSS) PRODUCTS UNDER TURNING-MILLING OPERATION USING AUTOMATICALLY PROGRAMMED TOOLS
Science intensive technologies in mechanical engineering
EVALUATION OF THE DYNAMICS OF THE METAL TURNING PROCESS BASED ON MEASUREMENTS TAKEN FROM THE CUTTING TOOL
Volume, issue
2022 № 6 (132) Published
Authors
Golodze Valera , Lapshin Viktor , Kolpakov Pavel
DOI
https://doi.org/10.30987/2223-4608-2022-6-22-26
Published
30.06.2022
Science intensive technologies in mechanical engineering
THE EFFECT OF TEETH PITCH DIVERSITY OF FACE MILLING CUTTER ON THE DYNAMIC STABILITY OF A NON-RIGID MANUFACTURING SYSTEM
Volume, issue
2022 № 5 (131) Published
Authors
Chetverikov Sergey
DOI
https://doi.org/10.30987/2223-4608-2022-5-3-10
Published
30.05.2022
Science intensive technologies in mechanical engineering
PARTS PRODUCTION UPGRADING THROUGH A COMBINATION OF DESIGNER AND PRODUCT EN-GINEER'S JOINT WORK PARALLELED
Volume, issue
2022 № 7 (133) Published
Authors
Bezyazychnyy Vyacheslav , Rastegaev Evgeny
DOI
https://doi.org/10.30987/2223-4608-2022-1-7-17-26
Published
29.07.2022
Science intensive technologies in mechanical engineering
A COMPREHENSIVE APPROACH TO THE APPLICATION OF TYPES OF TECHNOLOGY
Volume, issue
2022 № 7 (133) Published
Authors
Bazrov Boris
DOI
https://doi.org/10.30987/2223-4608-2022-1-7-27-32
Published
29.07.2022
Science intensive technologies in mechanical engineering
METHODS OF ULTRASONIC SURFACE PLASTIC DEFORMATION
Volume, issue
2022 № 7 (133) Published
Authors
Nigmetzyanov Ravil , Prikhodko Vyachyeslav , Sundukov Sergey , Sukhov Alexandr , Fatyukhin Dmitriy
DOI
https://doi.org/10.30987/2223-4608-2022-1-7-33-39
Published
29.07.2022
Science intensive technologies in mechanical engineering
MODELING AND MANAGEMENT OF GRINDING PROCESS ACCURACY
Volume, issue
2022 № 7 (133) Published
Authors
Huseynov Hasan
DOI
https://doi.org/10.30987/2223-4608-2022-1-7-40-48
Published
29.07.2022
Science intensive technologies in mechanical engineering
MODELLING OF TOOL AND PIECE PART RELATIVE MOTION EFFECT ON MATERIAL REMOVAL IN INTERNAL CYLINDRICAL GRINDING
Volume, issue
2022 № 9 (135) Published
Authors
Bratan S. , Chasovitina Anastasia
DOI
https://doi.org/10.30987/2223-4608-2022-9-3-9
Published
30.09.2022
Science intensive technologies in mechanical engineering
EVALUATION OF THE INFLUENCE OF A WEAR-RESISTANT COATING ON THE PROCESS OF TURNING A TITANIUM ALLOY
Volume, issue
2022 № 10 (136) Published
Authors
Pyatykh Aleksey , Timofeev Sergey
DOI
https://doi.org/10.30987/2223-4608-2022-10-14-21
Published
28.10.2022
Science intensive technologies in mechanical engineering
EFFICIENCY UPGRADING OF GRINDING WHEELS ON A RESINOID BOND BY CONTROLLING THE STRUC-TURE FORMATION AT DIFFERENT STAGES OF THE TECHNOLOGICAL PROCESS OF THEIR PRODUCTION
Volume, issue
2022 № 10 (136) Published
Authors
Shumyacher Vyacheslav , Medko Sergey
DOI
https://doi.org/10.30987/2223-4608-2022-10-22-25
Published
28.10.2022
Science intensive technologies in mechanical engineering
WAVINESS OF FLAT SURFACES GRINDED BY THE PERIPHERY OF THE COMBINED TOOL
Volume, issue
2022 № 12 (138) Published
Authors
Gusev Vladimir
DOI
https://doi.org/10.30987/2223-4608-2022-12-3-8
Published
30.12.2022
Science intensive technologies in mechanical engineering
INVESTIGATION OF THE STRESSED STATE OF A CARBIDE TOOL DURING TURNING OF RAILWAY WHEELS
Volume, issue
2022 № 12 (138) Published
Authors
Vorob'ev Aleksandr , Krutko Andrey , Sedykh Darya
DOI
https://doi.org/10.30987/2223-4608-2022-12-9-15
Published
30.12.2022
Science intensive technologies in mechanical engineering
ABRASIVE-BELT CREEP FEED GRINDING AS A PROGRESSIVE TYPE OF MACHINING OPERATION
Volume, issue
2022 № 12 (138) Published
Authors
Zubarev Yuriy , Priyomyshev Alexsandr , Zvonovskikh Viktor
DOI
https://doi.org/10.30987/2223-4608-2022-12-16-20
Published
30.12.2022
Science intensive technologies in mechanical engineering
PROCESS PARAMETERS SURVEY IN MILLING WITH VARIOUS TOOTH CUTTERS
Volume, issue
2022 № 12 (138) Published
Authors
Unyanin Aleksandr , Chudnov Aleksandr Vladimirovich
DOI
https://doi.org/10.30987/2223-4608-2022-12-21-26
Published
30.12.2022
Science intensive technologies in mechanical engineering
METHODOLOGY FOR THE STUDY OF VIBRATION PROCESSESS IN MILLING OPERATIONS
Volume, issue
2022 № 12 (138) Published
Authors
Gubanova Alexandra
DOI
https://doi.org/10.30987/2223-4608-2022-12-27-32
Published
30.12.2022
Science intensive technologies in mechanical engineering
STUDY CASE OF THE LOAD SHAPING IN THREADED FASTENING TURNS AND TECHNIQUE ANALYSIS OF THE WAYS FOR ENSURING BALANCING LOAD
Volume, issue
2023 № 1 (139) Published
Authors
Barabanova Irina
DOI
https://doi.org/10.30987/2223-4608-2023-1-20-23
Published
30.01.2023
Science intensive technologies in mechanical engineering
MEASUREMENT OF CUTTING FORCE AND TORQUE DURING THREAD MILLING
Volume, issue
2023 № 1 (139) Published
Authors
Saikin Sergey , Tsvetkov Egor , Tolkachev Alexander
DOI
https://doi.org/10.30987/2223-4608-2023-1-24-30
Published
30.01.2023
Science intensive technologies in mechanical engineering
VALUE ELASTICITY ESTIMATION IN PENDULUM SURFACE PLASTIC DEFORMATION
Volume, issue
2023 № 2 (140) Published
Authors
Zaides Semen , Ho Minh
DOI
https://doi.org/10.30987/2223-4608-2023-2-8-14
Published
28.02.2023
Science intensive technologies in mechanical engineering
DESIGN TECHNIQUES FOR TURNING OPERATIONS IN SHELL CASINGS PROCESSING
Volume, issue
2023 № 3 (141) Published
Authors
Chuprikov Artem , Yamnikov Aleksandr
DOI
https://doi.org/10.30987/2223-4608-2023-3-11
Published
28.03.2023
Science intensive technologies in mechanical engineering
DETERMINING DEMANDS OF PARTS PRODUCTION TECHNIQUES
Volume, issue
2023 № 5 (143) Published
Authors
Bazrov Boris
DOI
https://doi.org/10.30987/2223-4608-2023-3-7
Published
30.05.2023
Science intensive technologies in mechanical engineering
PECULIARITIES OF TOOL DESIGN FOR PHYSICAL MODELING OF SHAVING-ROLLING CYLINDRICAL GEAR-WHEELS
Volume, issue
2023 № 5 (143) Published
Authors
Malikov Andrey , Sidorkin Andrey , Kovalev Yuriy Vyacheslavovich
DOI
https://doi.org/10.30987/2223-4608-2023-8-14
Published
30.05.2023
Science intensive technologies in mechanical engineering
THRUST FORCE INCUT USING SPHERICAL HEAD CUTTER
Volume, issue
2023 № 6 (144) Published
Authors
Bogomolov Maxim , Yamnikov Aleksandr , Yamnikova Ol'ga
DOI
https://doi.org/10.30987/2223-4608-2023-3-8
Published
30.06.2023
Science intensive technologies in mechanical engineering
THE DEVELOPMENT OF ENGINEERING SUPPORT FOR LOOSE ABRASIVE WORKING METHODS
Volume, issue
2023 № 7 (145) Published
Authors
Bochkarev Pyotr
DOI
https://doi.org/10.30987/2223-4608-2023-7-8-14
Published
28.07.2023
Science intensive technologies in mechanical engineering
COMPUTER SIMULATION TECHNIQUE FOR DRILLING PROCESS OF TITANIUM ALLOY AND COMPOSITE MATERIAL COMPLEX PACKAGES USING DIGITAL TWINS
Volume, issue
2023 № 8 (146) Published
Authors
Kiselyov Evgeny , Ilyushkin Maxim
DOI
https://doi.org/10.30987/2223-4608-2023-3-11
Published
30.08.2023
Science intensive technologies in mechanical engineering
DESIGN OF MECHATRONIC SYSTEMS OF HYBRID MACHINE COMPLEXES
Volume, issue
2023 № 8 (146) Published
Authors
Kheyfets Mikhail
DOI
https://doi.org/10.30987/2223-4608-2023-12-19
Published
30.08.2023
Science intensive technologies in mechanical engineering
DESIGN OF PROCESSING TECHNOLOGY IN GRANULATED MEDIA IN THE CONDITIONS OF DIGITAL PRODUCTION
Volume, issue
2023 № 9 (147) Published
Authors
Tamarkin Mihail , Tischenko Elina
DOI
https://doi.org/10.30987/2223-4608-2023-16-26
Published
29.09.2023
Science intensive technologies in mechanical engineering
CALCULATION OF HIGH-DUTY COLD REDUCTION ROLLERS GRINDING CYCLES BASED ON RADIAL FORCE CYCLE OPTIMIZATION
Volume, issue
2023 № 10 (148) Published
Authors
Bratan S. , Golovin Vasiliy , Novosyolov Yuriy , Dymchenko Irina
DOI
https://doi.org/10.30987/2223-4608-2023-30-38
Published
30.10.2023
Science intensive technologies in mechanical engineering
ORGANIZATION OF SMALL-SCALE PRODUCTION OF PARTS BASED ON MODULE TECHNOLOGY PATTERNS
Volume, issue
2023 № 11 (149) Published
Authors
Bazrov Boris
DOI
https://doi.org/10.30987/2223-4608-2023-24-29
Published
30.11.2023
Science intensive technologies in mechanical engineering
MULTIPLE-CRITERIA OPTIMIZATION OF OPERATIONAL MODES OF TECHNOLOGICAL PROCESSES
Volume, issue
2023 № 11 (149) Published
Authors
Totay Anatoliy , Nagorkin Maksim , Selifonov Vitaliy
DOI
https://doi.org/10.30987/2223-4608-2023-30-38
Published
30.11.2023
Science intensive technologies in mechanical engineering
STUDY OF THE TECHNIQUE PERFORMANCE FOR THE CORRECTION OF THE MODE OF THE MACHINING PROCESS WITH TIME-VARYING PARAMETERS IN THE CONDITIONS OF TECHNOLOGICAL INFORMATION UNCERTAINTY
Volume, issue
2023 № 12 (150) Published
Authors
Unyanin Aleksandr , Finageev Pavel
DOI
https://doi.org/10.30987/2223-4608-2023-23-29
Published
27.12.2023
Science intensive technologies in mechanical engineering
THE DEVELOPMENT OF COMPUTER-AIDED PLANNING PRINCIPLES FOR MULTIPRODUCT MACHINING PROCESSES
Volume, issue
2024 № 1 (151) Published
Authors
Mitin Sergey , Bochkarev Petr
DOI
https://doi.org/10.30987/2223-4608-2024-16-22
Published
30.01.2024
Science intensive technologies in mechanical engineering
INVESTIGATION OF MODE ELEMENTS EFFECT AND THE INFLUENCE OF MILLING CUTTER TEETH SPACE ON TECHNOLOGICAL PARAMETERS AND TEMPERATURE FIELD OF WORK ON A THIN-WALLED PARTS WORKPIECE
Volume, issue
2024 № 1 (151) Published
Authors
Unyanin Aleksandr , Chudnov Aleksandr
DOI
https://doi.org/10.30987/2223-4608-2024-23-29
Published
30.01.2024
Science intensive technologies in mechanical engineering
INFLUENCE OF REVERSIBLE SURFACE PLASTIC DEFORMATION PARAMETERS ON THE PARAMETERS OF THE SURFACE WAVINESS OF CYLINDRICAL PARTS
Volume, issue
№ 4 (142) Published
Authors
Zaides Semen , Nguyen Huu
DOI
https://doi.org/10.30987/2223-4608-2023-37-48
Published
28.04.2023
Science intensive technologies in mechanical engineering
AN ARRAY OF QUESTIONS RELATED TO NEW TECHNOLOGIES FOR MANUFACTURING NON-RIGID THIN-SHELL FLAT PARTS MADE OF AIRCRAFT MATERIALS IS VIEWED. TO REDUCE POSSIBLE DEFORMATIONS AND IMPROVE THE QUALITY, IT HAS BEEN SUGGESTED THAT THE ENERGY OF A MODULATED ULTRASONIC FIELD SHOULD BE USED
Volume, issue
2022 № 9 (135) Published
Authors
Kiselyov Evgeny
DOI
https://doi.org/10.30987/2223-4608-2022-9-10-17
Published
30.09.2022
Science intensive technologies in mechanical engineering
INVESTIGATION OF FORM DEVIATIONS OF HIGH-SPEED STEEL (HSS) PRODUCTS UNDER TURNING-MILLING OPERATION USING AUTOMATICALLY PROGRAMMED TOOLS
Volume, issue
2023 № 7 (145) Published
Authors
Matlygin Georgiy , Savilov Andrey , Nikolaev Andrey , Timofeev Sergey
DOI
https://doi.org/10.30987/2223-4608-2023-7-15-23
Published
28.07.2023
© INFRA-M
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?