from 01.01.1980 to 01.01.2022
Ulyanovsk, Ulyanovsk, Russian Federation
The obtained analytical dependences, which allow determining the parameters of flank milling and peripheral milling using butt mills with various tooth cutters are presented. Computer simulation using these dependencies allows revealing of regularity in cut geometric parameters change, cutter force and friction load, as well as temperatures in the interface of the cutter tooth with facing and rough piece and also in the strand shell depending on the duration of the cutter tooth contact with the workpiece surface and the teeth distance
milling, force, temperature, irregular pitch, model, rough piece
1. Khramov, A.V. Improving the performance of the processing of deep holes by improving the structure of the boring tool // IOP Conference Series: Materials Science and Engineering. - 2019. - 709 044068. Vol. 3.
2. Osobennosti importozamescheniya metallorezhuschego instrumenta v sovremennyh usloviyah / A.V. Hramov, E.N. Leksin, I.V. Semdyankin, M.V. Nazarov, E.S. Kiselev // STIN, 2016. - №1. - S. 21-26.
3. Reznikov, A.N., Reznikov, L.A. Teplovye processy v tehnologicheskih sistemah. - M.: Mashinostroenie, 1990. - 288 s.
4. Unyanin, A.N. Analiticheskoe issledovanie temperaturnogo polya pri frezerovanii s nalozheniem ul'trazvukovyh kolebaniy // Vestnik RGATU im. P.A. Solov'eva. - 2017. - № 2 (41). - S. 220-235.
5. Bobrov, V.F. Osnovy teorii rezaniya metallov. - M.: Mashinostroenie, 1975. - 344 s.
6. Voroncov, A.L., Sultan-Zade, N.M., Albagachiev, A.Yu. Razrabotka novoy teorii rezaniya. Matematicheskoe opisanie obrazovaniya struzhki raznyh vidov, pul'sacii sil rezaniya i parametrov kontakta obrabotannoy poverhnosti zagotovki s zadney poverhnost'yu rezca // Vestnik mashinostroeniya. - 2008. - № 7. - S. 56-61.
7. Yaschericyn, P.I., Fel'dshteyn, E.E., Kornievich, M.A. Teoriya rezaniya: uchebnik. - Minsk: Novoe znanie, 2006. - 512 s.
8. Unyanin A.N., Khusainov A.S. The ultrasonic grinding process temperature field study // MATEC Web of Conferences. - 2017. - Vol. 129.
9. Spravochnik instrumental'schika / I.A. Ordinarcev, G.V. Filippov, A.N. Shevchenko i dr. / Pod obsch. red. I.A. Ordinarceva. - L.: Mashinostroenie, Leningradskoe otdelenie, 1987. - 846.
10. Voroncov, A.L., Sultan-Zade, N.M., Albagachiev, A.Yu. Razrabotka novoy teorii rezaniya. Prakticheskie raschety parametrov rezaniya pri tochenii // Vestnik mashinostroeniya. - 2008. - № 9. - S. 67-70.
