Russian Federation
Omsk, Omsk, Russian Federation
from 01.01.2012 until now
Omsk, Omsk, Russian Federation
The tense state of carbide instrument at turning treatment of railway wheels work is tested using mathematical modeling and Michel method, taking into account the thermomechanical approach and temperatures and forces effect on wear and plastic deformation of hard alloys
wheel profile, cutting wedge, shape stability temperature, tangential stresses, deformation
1. Krutko, A.A., Kushner, V.S., Vorobyev, A.A. Improving the efficiency of restorative turning of railway wheel sets: monograph, Omsk: Publishing house of OmSTU, 2013, 176 p.
2. Ivanova, I.A., Kushner, V.S. The influence of the structure and mechanical characteristics of wheel steels on the wear and recovery modes of the profile of wheel pairs: monograph, Omsk: Publishing house of OmSTU, 2015, 224 p.
3. Vorobyev, A.A. Improvement of wheelset restoration technology: monograph, LAP LAMBERT Academic Publishing GmbH & Co, 2011, 186 p.
4. Valinsky, O.S., Vorobyov, A.A., Gubenko, S.I. and others. Improving the performance of wheel sets of rolling stock: monograph, Kazan: Buk, 2022, 324 p.
5. Vorobyev, A.A., Potakhov, D.A., Krutko, A.A., Fisenko, V.I. Evaluation of the stress-strain state and strength of the cutting tool when turning railway wheels // Omsk Scientific Bulletin, 2015, No. 140, PP. 62-66.
6. Vorobyov, A.A., Kushner, V.S., Krutko, A.A., Krutko, A.A. Analysis of the working conditions of a carbide tool under severe conditions of wheel steel processing // Bulletin of the Institute of Problems of Natural Monopolies: Railway Engineering, 2015, № 3(31), PP. 24-29.
7. Makarov, A.D. et al. The influence of the average contact temperature during cutting on the main characteristics of the quality of the surface layer // Thermophysics of technological processes, Kuibyshev: Publishing House, 1970, PP. 270-275.
8. Kushner, V.S., Storchak, M.G., Vorobyev, A.A., etc. Improvement of temperature calculation during cutting on the basis of thermomechanical approach // Omsk Scientific Bulletin, 2009, № 1(77), PP. 10-14.
9. Kushner, V.S., Zhavnerov, A.N., Gorshenin, V.A. Influence of temperature and stresses on the intensity of the cutting blade shape change during processing of nickel alloys // Omsk Scientific Bulletin, 2007, № 3(60), PP. 26-28.
10. Timoshenko, S.P., Goodyear, J. Theory of elasticity: Trans. from English, M.: Nauka. The main edition of the physical and mathematical literature, 1979, 560 p.
