ABRASIVE-BELT CREEP FEED GRINDING AS A PROGRESSIVE TYPE OF MACHINING OPERATION
Authors:
1.
Saint-Petersburg State Marine Technical University
(professor)
Sankt-Peterburg, Russian Federation
Sankt-Peterburg, Russian Federation
2.
Peter the Great Saint-Petersburg Polytechnic University
(docent)
Sankt-Peterburg, St. Petersburg, Russian Federation
Sankt-Peterburg, St. Petersburg, Russian Federation
3.
Sankt-Peterburgskiy politehnicheskiy universitet Petra Velikogo
Sankt-Peterburg, Russian Federation
Sankt-Peterburg, Russian Federation
Type:
Article
Pages:
from 16
to 20
Status:
Published
Received:
25.12.2022
Accepted:
30.12.2022
Published:
30.12.2022
Subject area:
UDK 621.923.9 Прочие способы (процессы) шлифования и полирования
Language:
Russian
Keywords:
abrasive-belt grinding, specific work, effective power, efficient belt life, processing accuracy and performance
Abstract (English):
he results of experimental work on abrasive-belt creep feed grinding of 20X13 steel and VT3-1 alloy are presented. The advantage of abrasive-belt creep-feed grinding, which allows significant increasing of the efficiency of work on a workpiece of machine parts, particularly having cam surfaces, such as steam and gas turbine blades, propeller blades, etc., is shown.
he results of experimental work on abrasive-belt creep feed grinding of 20X13 steel and VT3-1 alloy are presented. The advantage of abrasive-belt creep-feed grinding, which allows significant increasing of the efficiency of work on a workpiece of machine parts, particularly having cam surfaces, such as steam and gas turbine blades, propeller blades, etc., is shown.
Keywords:
abrasive-belt grinding, specific work, effective power, efficient belt life, processing accuracy and performance
abrasive-belt grinding, specific work, effective power, efficient belt life, processing accuracy and performance
1. Kremen', Z.I., Yur'ev, V.G., Baboshkin, A.F. Tehnologiya shlifovaniya v mashinostroenii / pod obsch. red. Z.I. Kremnya. - SPb.: Politehnika, 2007. - 424 s.
2. Makarov, V.F. Sovremennye metody vysokoeffektivnoy abrazivnoy obrabotki zharoprochnyh staley i splavov. - SPb.: Lan', 2013. - 320 s.
3. Zubarev, Yu.M., Yur'ev, V.G. Abrazivnye instrumenty. Razrabotka operaciy shlifovaniya. - SPb.: Lan', 2018. - 360 s.
4. Stratievskiy, I.H., Yur'ev, V.G., Zubarev, Yu.M. Abrazivnaya obrabotka. Spravochnik. - M.: Mashinostroenie, 2010. - 352 s.
