Chita, Chita, Russian Federation
Experimental studies of the effect of adjacent teeth pitch diversity on self-oscillation excitations in a cutting manu-facturing system having a reduced rigidity in normal line towards treated surface, are presented. The possibility for effective suppression of self-oscillations during face milling by controlling teeth pitch of the cutter is given. A stepwise teeth diversity making possible to suppress self-oscillations by 50 % has been found.
face milling cutter, dynamic stability, cutting modes, technological process, vibrations, machining, dynamometer, controlled tooth pitch
1. Problems of machine tool construction in the USA. Automatic lines and metal-cutting machines. Translated from English by A.I. Smirnov, Moscow, 1983, no. 17.
2. Khrunev, Yu.M., Dyzhin, V.A. Face milling cutters with mechanical fastening of plates / Mashinostroitel’, no. 3, 1986, pp. 20-21.
3. Vasin, S.A., Vereshchaka, A.S., Kushner, B.C. Cut-ting materials: Thermo-mechanical approach to the system of interconnections during cutting: textbook for technical universities. / S.A. Vasin, A.S., Vereshchaka, V.S. Kushner/Moscow: Publishing house of N.E. Bauman MSTU, 2001, 448 p.
4. Wolf, A.M. Metal cutting. Ed. 2-nd, Moscow: Ma-shinostroenie, 1973, 496 p.
5. Granovsky, G.I. Cutting metals / Moscow: Higher School, 1985, 303 p. (in Russ.)
6. Kudinov, V.A. Dynamics of machine tools / Moscow: Mashinostroyenie publ., 1967, 359 p. (in Russ.)
7. Rosenberg, A.M. Dynamics of milling operation / Moscow: Sovetskaya nauka, 1945.
8. Puzanov, Yu.V. Investigation of the dynamical stability of bulk movement during face milling. Candidate's thesis, Leningrad, 1980, 238 p.
9. Kuchma, L.K. Vibrations in machining operation on millers and methods of their dampening. Moscow: VINITI, 1959, 81 p.
10. Prilutsky, V.A. Technological methods for reducing surface undulation / Moscow: Mashinostroenie, 1978,136 p.
11. Razdobreev, A.H. About the uneven pitch of the teeth of the milling cutters. The book: Manufacturability in mechanical assembly production / Ryazan, 1977, pp. 117-120.
12. Svinin, V.M. Milling with modulated cutting speed / Edited by A.I. Promptov/ Irkutsk: Publishing House of IrSTU, 2007, 304 p.
13. Chetverikov, S.V. Experimental study of the effect of additional grinding operation of cutting instrumentality of face milling cutter on the effectiveness of suppression of emerging self-oscillations / Modern technologies. System analysis. Modeling, 2021, no. 4.
