Rubrics Группа компаний ИНФРА-М - Эдиторум

Home / Journals / Bulletin Samara State Agricultural Academy / Rubric TECHNOLOGY, MEANS OF MECHANIZATION AND POWER EQUIPMENT IN AGRICULTURE

Articles of rubric " TECHNOLOGY, MEANS OF MECHANIZATION AND POWER EQUIPMENT IN AGRICULTURE " of journal " BULLETIN SAMARA STATE AGRICULTURAL ACADEMY "

IMPROVEMENT OF DETAILS CONNECTION ASSEMBLY TECHNOLOGY WITH INTERFERENCE

THE DEVICES FOR THE TRANSPORT DIESEL ENGINES CONSTRUCTIVE ADAPTATION FOR THEIR OPERATION BY BIODIESEL FUEL

ANALYTICAL ASPECTS OF GRAVITY MIXING DRUM DEVICES

DIESEL MIXED FUEL: PROBLEMS AND INNOVATIVE INVENTIONS

STAND FOR RUNNING AND TESTING OF LOW POWER MOBILE FARM MACHINERY ENGINES

METHODS AND MEANS OF BATTERIES WORKING CAPACITY CHECKING

MODELING OF PNEUMATIC DEVICES FOR MASSAGE OF THE UDDER OF SINGLE-CHAMBER TYPE HEIFERS

CELL BATTERY NATURAL COLD FOR COOLING MILK ON FARMS

THE RESULTS OF STUDIES OF THE CRACKS DEVELOPMENT IN THE CYLINDER HEADS OF THE ENGINE YAMZ-238НБ

JUSTIFICATION OF ROTOR SPEED OF RADIAL HONEY SEPARATOR WITH THE HORIZONTAL FULCRUM PIN

THE INFLUENCE OF EXTRUSION PROCESSING FOR CHEMICAL COMPOSITION AND FUNCTIONAL AND TECHNOLOGICAL PROPERTIES OF PUMPKIN SEEDS

THEORETICAL SUBSTANTIATION OF CONSTRUCTIVE AND REGIME PARAMETERS OF MECHANICAL CELLULAR-DISK SOWING DEVICE FOR SOWING AMARANTH PANICULATE

THE ROTARY DRUM MIXER OPERATION PROCESS MODEL AND THEORETICAL JUSTIFICATION OF ITS PARAMETERS

DETERMINATION OF BLADED PLATE KEEPER DESIGN DATA OF CREAM SEPARATOR

THE INFLUENCE OF THE MEASURING CONVERTERS CHARACTERISTICS FOR THE DETAILS PROCESSING ACCU-RACY IN MACHINE TOOLS WITH MULTI-LOOP CONTROL SYSTEMS

DEVELOPMENT OF AUTOMATION SYSTEM OF THE FERTILIZERS DIFFERENTIATED APPLICATION

RESULTS OF FIELD SURVEYS OF EXPERIMENTAL SELECTION SEEDER WITH THE BOBBIN AND BAYONET SOWING DEVICE

REDUCTION OF SPECIFIC ENERGY CONSUMPTION FOR GRAIN DRYING DEPLOYMENT CONTACT TYPE

EXPERIMENTAL RESEARCH OF THE COMBINED DEVICE FOR MASSAGE OF HEIFERS UDDER

INFLUENCE OF VEGETABLE COMPONENTS FOR TRIBOLOGICAL PROPERTIES OF FUELS FOR AUTOTRACTOR DIESELS

FEATURES OF THE DIESEL RUNNING BY CAMELINA-MINERAL FUEL IN THE MODE OF INDEPENDENT IDLING

THEORETICAL RESEARCH OF THE SCAFFOLDER AND SOIL INTERACTION

SUBSTANTIATION OF THE PARAMETERS OF TILLAGE RINK

INFLUENCE OF PLOUGH WORKING BODIES KEY PARAMETERS FOR THE QUALITY OF TIERED PLOWING

USING OF ACCELERATION CHARACTERISTICS OF THE ENGINE AND THE TURBOCHARGER FOR SUPERCHARGING SYSTEM DIAGNOSING

THE EFFECT OF MIXING DURATION AND THE PROPORTION OF SMALLER COMPONENT FOR THE PERFORMANCE OF THE PADDLE MIXER RUNNING WITH EXTRA BLADES

TECHNOLOGY, MEANS OF MECHANIZATION AND POWER EQUIPMENT IN AGRICULTURE

THE INFLUENCE OF TILLAGE LONGLINE PROCESS PARAMETERS FOR ENERGY OUTLAY

SOIL STRUCTURE AND HARDNESS CHANGE RESULTING FROM THE DEPTH OF A TRACTOR TRACK UNDER DIFFERENT WHEEL DRIVE TOWING STRENGTH

DETERMINATION OF AUGER-BLADE MIXER RATIONAL PARAMETERS

INFLUENCE OF DESIGN OPERATING AND TECHNOLOGICAL PARAMETERS OF AUGER-BLADE MIXER ON POWER CONSUMED BY IT

THEORETICAL UNDERPINNING OF FIELDS MAPPING AUTOMATION FOR IMPROVEMENT OF THE WAY OF SOIL SAMPLIN

AUTOMATION CONTROL EQUIPMENT FOR MATERIAL WINDING INTO A ROLL

THE INFLUENCE OF MIXER ROTATION FREQUENCY AND ITS BLADES LENGTH ON THE QUALITY OF THE MIXTURE

ANALYTICAL DESCRIPTION OF THE MIXER PERFORMANCE FOR BULK MATERIALS WITH SCREW BLADES

DETERMINATION OF RATIONAL METHOD OF HEATING OF MIXED MINERAL AND VEGETABLE FUELS FOR AUTOMOTIVE DIESEL ENGINES

ULTRASOUND: ADVANTAGE FOR APPLICATION AND TECHNICAL MEANS

EXPERIMENTAL DETERMINATION OF THE CHARACTERISTICS OF THE ROLLER BRAKE TESTER FOR RUNNING OF SMALL-BASED ENGINES OF AGRICULTURAL EQUIPMENT IN COLD REGIMES

THEORETICAL STUDY OF THE WORK OF THE TRACTOR DIESEL IN APPLYING DIESEL MIXTURE FUEL BASED ON RICINIC OIL

THE SPEED MODE OF AEROPRODUCT FLOW WITH PARALLEL-SEQUENTIAL SECTIONS

IMPROVEMENT OF EXTRUDER WORKING PROCESS WITH TERMOVACUAL EFFECT

CONTROL OF TECHNICAL CONDITION OF HYDRAULIC UNIT OF AUTOMATIC TRANSMISSION

SUBSTANTIATION OF NEEDLE SHAPE OF TRACTION-DRIVEN TILLAGE TOOLS

EFFECT OF ANTI-CORROSION INHIBITORS ON PROTECTION PERFORMANCE OF AUTO BODY ELEMENTS

FUNCTIONAL DIAGRAM OF THE SOWING UNIT BASED ON A PNEUMATICCALLY OPERATED SEEDER

PRESSURE ACCUMULATOR DISCHARGE EFFECT ON GEAR SHIFT WITH HYDRAULIC CONTROL BOX

OPTIMIZATION OF HOLES IN THE MATRIX OF A SINGLE-SCREW EXTRUDER FOR PROCESSING OF POULTRY MANURE

DETERMINATION OF THE ROTARY DRUM MIXER DRIVE POWER

INVESTIGATION OF FRICTION IN MAGNETIC FLUID SEAL

ORGANIZATION OF CONTROL AND RECORDING SYSTEM FOR TRANSIENTS IN AN INTERNAL COMBUSTION ENGINE BASED ON THE L-CARD E14-140 ANALOG-TO-DIGITAL CONVERTER AND THE POWERGRAPH SOFTWARE PACKAGE

MODELING MILK YIELD OF CATTLE BREED WHEN CHANGING TECHNOLOGICAL PROCESSES

MANURE EXTRUSION FROM HIGH-MOISTURE POULTRY WASTE

STUDY OF HERMETIC ABILITY OF A COMBINED FERROFLUIDIC SEALED OF BEARING ASSEMBLIES

OPTIMIZATION OF PARAMETERS OF POWERED TILLAGE TOOL WITH SOIL SPIKERS

OPTIMIZATION OF DESIGN AND PROCESS PARAMETERS OF THE PEG-WHEEL FEED

THEORETICAL JUSTIFICATION OF DESIGN AND PROCESS DEPENDENT PARAMETERS OF A SUPPLY PORT OF A BELT FEED WITH DISKS

IMPROVING ENERGY EFFICIENCY OF SOIL TREATMENT USING TRACTION DRIVEN TILLAGE IMPLEMENT

ANALYSIS OF MASSAGE DEVICE OPERATION ON THE BASIS OF PNEUMATIC ELEMENTS FOR HEIFER UDDER

DETERMINATION OF INFLUENCE OF ELECTROMAGNETIC INDUCTOR FREQUENCY ON ELECTRIC HEATER FOR FAT CLARIFYING

INFLUENCE OF DIMENSIONAL CHARACTERISTICS OF THE EXTRUDER MATRIX ON THE PROPERTIES OF EXTRUDATE

ADVANCED ENGINEERING AND TECHNOLOGY FOR APPLICATION OF LIQUID NITROGEN CHEMICAL FERTILIZER CARBOMIDE-AMMONIA MIXTURE BASED

RESEARCHES RESULTS OF CONSTRUCTIVE AND TECHNOLOGICAL PARAMETERS OF THE DISK AND BAYONET SOWING DEVICE INFLUENCE FOR OF DISPENSING SEEDS UNIFORMITY

INFORMATION TECHNOLOGY APPLICATION WHEN THE FIT CONNECTIONS PROBABILISTIC DEFINITION

ADAPTATION OF THE AUTOMOTIVE DIESEL ENGINE TO OPERATE ON SOY AND MINERAL FUEL

THE AUTOMATIC CONTROL SYSTEM FOR OPERATION OF PETROL INJECTION ENGINE AT IDLE APEED MODE

THE CALCULATION OF HYDRAULIC PRESS EFFORT TO BUILD CONNECTIONS OF PARTS BY TENSION

INFLUENCE OF SLIPPING MODES OF THE WHEELED RUNNING GEAR OF MTU POWER MEANS ONTO PHYSICAL PROPERTIES OF THE SOIL

INFLUENCE OF OLEIC ACID FOR AUTOTRACTOR DIESEL FUEL TRIBOLOGICAL PROPERTIES

TEORETICAL EVALUATION OF ANNULAR CLEARANCE CHANGE IN PLUNGER PAIRS OF HPFP (HIGH PRESSURE FUEL PUMPS) DEPENDING ON THE AMOUNT OF CAMELINA OIL IN COMPOSITE CAMELINA-MINERAL FUEL

FERTILIZER OF SWEET PEPPER IN NON-DISTRIBUTION CULTURE ON LIGHT-CHESTNUT SOILS OF VOL-GOGRAD REGION

REACTIONS DETERMINATION OF THE WHEEL TRAILER MOUNTING LINKAGE

DETERMINATION OF DOWNLOADING OF AUTOTRACTOR DIESEL WITH GAS-TURBINE BACKGROUND ON THE TEMPERATURE OF WORKED GASES AND THE FREQUENCY OF ROTATION OF THE TURBOCHOMPRESSOR SHAFT

SIMULATION OF THE COMPARENT MIXING DURATION ACCORDING TO LESS COMPONENT PORTION

TEST BED FOR CHECKING WORK CAPACITY OF TURBOCHARGERS OF AUTOTRACTOR ENGINES

THEORETICAL JUSTIFICATION OF THE SEEDS MOVEMENT ALONG THE RECEPTION TRAY OF THE EXPERIMENTAL SELECTIVE PNEUMATIC SEEDING MACHINE

THE CHARACTERISTICS OF THE LOAD BEARING COMPONENT MOBILE TRAILER AT CROSS SLOPE

THEORETICAL RESEARCH OF THE ROTOR WHEEL OF THE REAPING MACHINE

POWER DETERMINATION TO THE DRIVE OF MILKCHURNS WITH THE FLEXIBLE VIBRODRIVE

Bulletin Samara State Agricultural Academy

IMPROVEMENT OF DETAILS CONNECTION ASSEMBLY TECHNOLOGY WITH INTERFERENCE

Volume, issue

1 № 2 Published

Authors

Konovalov Vladimir , Simanin Nikolay Alekseevich , Petrova Svetlana

DOI

https://doi.org/10.12737/18678

Published

05.05.2016

THE DEVICES FOR THE TRANSPORT DIESEL ENGINES CONSTRUCTIVE ADAPTATION FOR THEIR OPERATION BY BIODIESEL FUEL

Volume, issue

1 № 2 Published

Authors

Ukhanov Aleksandr , Ukhanov Denis Aleksandrovich , Khokhlova Ekaterina Alekseevna , Khokhlov Anton Alekseevich

DOI

https://doi.org/10.12737/18679

Published

05.05.2016

ANALYTICAL ASPECTS OF GRAVITY MIXING DRUM DEVICES

Volume, issue

1 № 2 Published

Authors

Dimitriev Nikolay , Konovalov Vladimir , Teryushkov Vyacheslav , Chupshev Aleksey

DOI

https://doi.org/10.12737/18680

Published

05.05.2016

DIESEL MIXED FUEL: PROBLEMS AND INNOVATIVE INVENTIONS

Volume, issue

1 № 2 Published

Authors

Ukhanov Denis Aleksandrovich , Ukhanov Aleksandr , Adgamov Irfan Fyarhatevich

DOI

https://doi.org/10.12737/18698

Published

05.05.2016

STAND FOR RUNNING AND TESTING OF LOW POWER MOBILE FARM MACHINERY ENGINES

Volume, issue

1 № 2 Published

Authors

Baykov Dmitriy Vladimirovich , Inshakov Aleksandr , Desyaev Sergey Sergeevich

DOI

https://doi.org/10.12737/18699

Published

05.05.2016

METHODS AND MEANS OF BATTERIES WORKING CAPACITY CHECKING

Volume, issue

1 № 2 Published

Authors

Desyaev Sergey Sergeevich , Inshakov Aleksandr , Baykov Dmitriy Vladimirovich

DOI

https://doi.org/10.12737/18700

Published

05.05.2016

MODELING OF PNEUMATIC DEVICES FOR MASSAGE OF THE UDDER OF SINGLE-CHAMBER TYPE HEIFERS

Volume, issue

1 № 4 Published

Authors

Kurochkin Anatoliy , Frolov Dmitriy

DOI

https://doi.org/10.12737/21788

Published

27.10.2016

CELL BATTERY NATURAL COLD FOR COOLING MILK ON FARMS

Volume, issue

1 № 4 Published

Authors

Kozlovtsev Andrey Petrovich , Kvashennikov Vasiliy Ivanovich , Konstantinov Mikhail Maerovich , Kozlovtseva Svetlana Petrovna

DOI

https://doi.org/10.12737/21789

Published

27.10.2016

THE RESULTS OF STUDIES OF THE CRACKS DEVELOPMENT IN THE CYLINDER HEADS OF THE ENGINE YAMZ-238НБ

Volume, issue

1 № 4 Published

Authors

Cherkashin Nikolay Aleksandrovich , Zhiltsov Sergey

DOI

https://doi.org/10.12737/21790

Published

27.10.2016

JUSTIFICATION OF ROTOR SPEED OF RADIAL HONEY SEPARATOR WITH THE HORIZONTAL FULCRUM PIN

Volume, issue

1 № 4 Published

Authors

Syrkin Vladimir Anatol'evich , Vasilev Sergey Ivanovich

DOI

https://doi.org/10.12737/21791

Published

27.10.2016

THE INFLUENCE OF EXTRUSION PROCESSING FOR CHEMICAL COMPOSITION AND FUNCTIONAL AND TECHNOLOGICAL PROPERTIES OF PUMPKIN SEEDS

Volume, issue

1 № 4 Published

Authors

Shaburova Galina Vasil'evna , Sheshnizan Irina Nikolaevna , Voronina Polina Konstantinovna

DOI

https://doi.org/10.12737/21792

Published

27.10.2016

THEORETICAL SUBSTANTIATION OF CONSTRUCTIVE AND REGIME PARAMETERS OF MECHANICAL CELLULAR-DISK SOWING DEVICE FOR SOWING AMARANTH PANICULATE

Volume, issue

1 № 4 Published

Authors

Artamonov Evgenij Ivanovich , Kotov Dmitriy Nikolaevich , Artamonova Olga Aleksandrovna

DOI

https://doi.org/10.12737/21793

Published

27.10.2016

THE ROTARY DRUM MIXER OPERATION PROCESS MODEL AND THEORETICAL JUSTIFICATION OF ITS PARAMETERS

Volume, issue

2 № 1 Published

Authors

Dimitriev Nikolay , Konovalov Vladimir , Teryushkov Vyacheslav , Chupshev Aleksey

DOI

https://doi.org/10.12737/24508

Published

20.02.2017

DETERMINATION OF BLADED PLATE KEEPER DESIGN DATA OF CREAM SEPARATOR

Volume, issue

2 № 1 Published

Authors

Yashin Aleksandr , Mishanin Aleksandr , Semov Ivan Nikolaevich , Horev Pavel

DOI

https://doi.org/10.12737/24509

Published

20.02.2017

THE INFLUENCE OF THE MEASURING CONVERTERS CHARACTERISTICS FOR THE DETAILS PROCESSING ACCU-RACY IN MACHINE TOOLS WITH MULTI-LOOP CONTROL SYSTEMS

Volume, issue

2 № 1 Published

Authors

Simanin Nikolay Alekseevich , Konovalov Vladimir , Petrova Svetlana

DOI

https://doi.org/10.12737/24510

Published

20.02.2017

DEVELOPMENT OF AUTOMATION SYSTEM OF THE FERTILIZERS DIFFERENTIATED APPLICATION

Volume, issue

2 № 1 Published

Authors

Kanaev Mikhail , Karpov Oleg , Vasilev Sergey , Fathutdinov Marat

DOI

https://doi.org/10.12737/24511

Published

20.02.2017

RESULTS OF FIELD SURVEYS OF EXPERIMENTAL SELECTION SEEDER WITH THE BOBBIN AND BAYONET SOWING DEVICE

Volume, issue

2 № 2 Published

Authors

Mashkov Sergei , Syrkin Vladimir Anatol'evich

DOI

https://doi.org/10.12737/article_58f847cbe6c850.40145440

Published

20.04.2017

REDUCTION OF SPECIFIC ENERGY CONSUMPTION FOR GRAIN DRYING DEPLOYMENT CONTACT TYPE

Volume, issue

2 № 2 Published

Authors

Sutyagin Sergey , Kurdyumov Vladimir , Pavlushin Andrey , Dolgov Vladimir

DOI

https://doi.org/10.12737/article_58f847e2b43fe0.64340630

Published

20.04.2017

EXPERIMENTAL RESEARCH OF THE COMBINED DEVICE FOR MASSAGE OF HEIFERS UDDER

Volume, issue

2 № 2 Published

Authors

Kurochkin Anatoliy

DOI

https://doi.org/10.12737/article_58f847fa65dd29.94464089

Published

20.04.2017

INFLUENCE OF VEGETABLE COMPONENTS FOR TRIBOLOGICAL PROPERTIES OF FUELS FOR AUTOTRACTOR DIESELS

Volume, issue

2 № 3 Published

Authors

Bychenin Aleksandr , Chernikov Oleg , Prikazchikov Maksim

DOI

https://doi.org/10.12737/17445

Published

27.07.2017

FEATURES OF THE DIESEL RUNNING BY CAMELINA-MINERAL FUEL IN THE MODE OF INDEPENDENT IDLING

Volume, issue

2 № 3 Published

Authors

Ukhanov Aleksandr , Ukhanov Denis Aleksandrovich , Sidorov Evgeniy , Yakunin Aleksandr

DOI

https://doi.org/10.12737/17446

Published

27.07.2017

THEORETICAL RESEARCH OF THE SCAFFOLDER AND SOIL INTERACTION

Volume, issue

2 № 3 Published

Authors

Kanaev Mikhail , Karpov Oleg , Vasilev Sergey , Fathutdinov Marat

DOI

https://doi.org/10.12737/17448

Published

27.07.2017

SUBSTANTIATION OF THE PARAMETERS OF TILLAGE RINK

Volume, issue

2 № 3 Published

Authors

Sharonov Ivan Aleksandrovich , Kurdyumov Vladimir , Kurushin Viktor , Proshkin Vyacheslav

DOI

https://doi.org/10.12737/17449

Published

27.07.2017

INFLUENCE OF PLOUGH WORKING BODIES KEY PARAMETERS FOR THE QUALITY OF TIERED PLOWING

Volume, issue

2 № 3 Published

Authors

Erzamaev Maksim , Sazonov Dmitriy , Mustyakimov Rail' , Strel'cov Sergey

DOI

https://doi.org/10.12737/17450

Published

27.07.2017

USING OF ACCELERATION CHARACTERISTICS OF THE ENGINE AND THE TURBOCHARGER FOR SUPERCHARGING SYSTEM DIAGNOSING

Volume, issue

2 № 3 Published

Authors

Inshakov Aleksandr , Kurbakov Ivan , Kurbakova Mariya

DOI

https://doi.org/10.12737/17451

Published

27.07.2017

THE EFFECT OF MIXING DURATION AND THE PROPORTION OF SMALLER COMPONENT FOR THE PERFORMANCE OF THE PADDLE MIXER RUNNING WITH EXTRA BLADES

Volume, issue

2 № 3 Published

Authors

Fomina Mariya , Konovalov Vladimir , Teryushkov Vyacheslav , Chupshev Aleksey

DOI

https://doi.org/10.12737/17452

Published

27.07.2017

TECHNOLOGY, MEANS OF MECHANIZATION AND POWER EQUIPMENT IN AGRICULTURE

Volume, issue

3 № 1 Published

Authors

Kurochkin Anatoli

DOI

https://doi.org/10.12737/article_5ab38ba4b262b1.22938034

Published

05.04.2018

THE INFLUENCE OF TILLAGE LONGLINE PROCESS PARAMETERS FOR ENERGY OUTLAY

Volume, issue

3 № 2 Published

Authors

Erzamaev Maksim , Sazonov Dmitriy , Nesterov Evgenii , Zhiltsov Sergey

DOI

https://doi.org/10.12737/21003

Published

18.05.2018

SOIL STRUCTURE AND HARDNESS CHANGE RESULTING FROM THE DEPTH OF A TRACTOR TRACK UNDER DIFFERENT WHEEL DRIVE TOWING STRENGTH

Volume, issue

4 № 1 Published

Authors

Chernikov Oleg , Bychenin Aleksandr , Sazonov Dmitriy

DOI

https://doi.org/10.12737/27829/

Published

14.03.2019

DETERMINATION OF AUGER-BLADE MIXER RATIONAL PARAMETERS

Volume, issue

4 № 1 Published

Authors

Khol'shev Nikolai , Mukhin Viktor , Petrova Svetlana

DOI

https://doi.org/10.12737/27830/

Published

14.03.2019

INFLUENCE OF DESIGN OPERATING AND TECHNOLOGICAL PARAMETERS OF AUGER-BLADE MIXER ON POWER CONSUMED BY IT

Volume, issue

4 № 1 Published

Authors

Khol'shev Nikolai , Mukhin Viktor , Petrova Svetlana

DOI

https://doi.org/10.12737/27831/

Published

14.03.2019

THEORETICAL UNDERPINNING OF FIELDS MAPPING AUTOMATION FOR IMPROVEMENT OF THE WAY OF SOIL SAMPLIN

Volume, issue

4 № 1 Published

Authors

Vasilev Sergey Ivanovich , Mashkov Sergei , Kruychin Pavel

DOI

https://doi.org/10.12737/27832/

Published

14.03.2019

AUTOMATION CONTROL EQUIPMENT FOR MATERIAL WINDING INTO A ROLL

Volume, issue

4 № 1 Published

Authors

Simanin Nikolay Alekseevich , Konovalov Vladimir , Lyandenburskiy Vladimir

DOI

https://doi.org/10.12737/27833/

Published

14.03.2019

THE INFLUENCE OF MIXER ROTATION FREQUENCY AND ITS BLADES LENGTH ON THE QUALITY OF THE MIXTURE

Volume, issue

4 № 1 Published

Authors

Fomina Mariya , Chupshev Aleksey , Teryushkov Vyacheslav , Konovalov Vladimir

DOI

https://doi.org/10.12737/27834/

Published

14.03.2019

ANALYTICAL DESCRIPTION OF THE MIXER PERFORMANCE FOR BULK MATERIALS WITH SCREW BLADES

Volume, issue

4 № 1 Published

Authors

Borisova Marina , Novikov Vladimir , Konovalov Vladimir

DOI

https://doi.org/10.12737/27835/

Published

14.03.2019

DETERMINATION OF RATIONAL METHOD OF HEATING OF MIXED MINERAL AND VEGETABLE FUELS FOR AUTOMOTIVE DIESEL ENGINES

Volume, issue

4 № 2 Published

Authors

Volod’ko Oleg , Bychenin Aleksandr , Chernikov Oleg

DOI

https://doi.org/10.12737/article_5cdbc0e94cc1c9.07641574

Published

20.05.2019

ULTRASOUND: ADVANTAGE FOR APPLICATION AND TECHNICAL MEANS

Volume, issue

4 № 2 Published

Authors

Ukhanova Yuliy , Perova Natal'y , Ukhanov Aleksandr

DOI

https://doi.org/10.12737/article_5cdbc0d6ed3685.21192547

Published

20.05.2019

EXPERIMENTAL DETERMINATION OF THE CHARACTERISTICS OF THE ROLLER BRAKE TESTER FOR RUNNING OF SMALL-BASED ENGINES OF AGRICULTURAL EQUIPMENT IN COLD REGIMES

Volume, issue

4 № 2 Published

Authors

Inshakov Aleksandr , Baykov Dmitriy Vladimirovich , Kurbakov Ivan , Golyshev Mikhail

DOI

https://doi.org/10.12737/article_5cdbc0c24e6028.87827707

Published

20.05.2019

THEORETICAL STUDY OF THE WORK OF THE TRACTOR DIESEL IN APPLYING DIESEL MIXTURE FUEL BASED ON RICINIC OIL

Volume, issue

4 № 2 Published

Authors

Sadov Artem , Denezhko Lyubov' , Novopashin Leonid

DOI

https://doi.org/10.12737/article_5cde492557ef70.84822001

Published

20.05.2019

THE SPEED MODE OF AEROPRODUCT FLOW WITH PARALLEL-SEQUENTIAL SECTIONS

Volume, issue

4 № 2 Published

Authors

Kravtsov Artem , Konovalov Vladimir , Zaitsev Vladimir , Dontsova Marina

DOI

https://doi.org/10.12737/article_5cdbc098156d56.12929222

Published

20.05.2019

IMPROVEMENT OF EXTRUDER WORKING PROCESS WITH TERMOVACUAL EFFECT

Volume, issue

4 № 2 Published

Authors

Kurochkin Anatolii A Alekseevich

DOI

https://doi.org/10.12737/article_5cdbc0837a1bc3.84520731

Published

20.05.2019

CONTROL OF TECHNICAL CONDITION OF HYDRAULIC UNIT OF AUTOMATIC TRANSMISSION

Volume, issue

4 № 3 Published

Authors

Ekimov Petr , Fakhrutdinov Idel' , Lyandenburskiy Vladimir , Konovalov Vladimir

DOI

https://doi.org/10.12737/29840

Published

12.07.2019

SUBSTANTIATION OF NEEDLE SHAPE OF TRACTION-DRIVEN TILLAGE TOOLS

Volume, issue

4 № 4 Published

Authors

Savelyev Yriy , Mashkov Sergei , Ishkin Pavel , Petrov Mikhail

DOI

https://doi.org/10.12737/33174

Published

17.10.2019

EFFECT OF ANTI-CORROSION INHIBITORS ON PROTECTION PERFORMANCE OF AUTO BODY ELEMENTS

Volume, issue

5 № 1 Published

Authors

Sazonov Dmitriy , Erzamaev Maksim , Zhiltsov Sergey , Bychenin Aleksandr

DOI

https://doi.org/10.12737/36527

Published

25.03.2020

FUNCTIONAL DIAGRAM OF THE SOWING UNIT BASED ON A PNEUMATICCALLY OPERATED SEEDER

Volume, issue

5 № 1 Published

Authors

Kravtsov Artem , Konovalov Vladimir , Kuchmasov Kuhmaz , Zaitsev Vladimir

DOI

https://doi.org/10.12737/36528

Published

25.03.2020

PRESSURE ACCUMULATOR DISCHARGE EFFECT ON GEAR SHIFT WITH HYDRAULIC CONTROL BOX

Volume, issue

5 № 3 Published

Authors

Volod’ko Oleg , Bychenin Aleksandr , Chernikov Oleg

DOI

https://doi.org/10.12737/38765

Published

15.07.2020

OPTIMIZATION OF HOLES IN THE MATRIX OF A SINGLE-SCREW EXTRUDER FOR PROCESSING OF POULTRY MANURE

Volume, issue

5 № 4 Published

Authors

Potapov Maksim , Frolov Dmitriy , Kurochkin Anatoliy

DOI

https://doi.org/10.12737/39907

Published

16.10.2020

DETERMINATION OF THE ROTARY DRUM MIXER DRIVE POWER

Volume, issue

5 № 4 Published

Authors

Fudin Konstantin , Konovalov Vladimir , Teryushkov Vyacheslav

DOI

https://doi.org/10.12737/39908

Published

16.10.2020

INVESTIGATION OF FRICTION IN MAGNETIC FLUID SEAL

Volume, issue

6 № 1 Published

Authors

Terentyev Vladimir , Bausov Aleksei , Toropov Mihail

DOI

https://doi.org/10.12737/42653

Published

17.03.2021

ORGANIZATION OF CONTROL AND RECORDING SYSTEM FOR TRANSIENTS IN AN INTERNAL COMBUSTION ENGINE BASED ON THE L-CARD E14-140 ANALOG-TO-DIGITAL CONVERTER AND THE POWERGRAPH SOFTWARE PACKAGE

Volume, issue

6 № 1 Published

Authors

Inshakov Aleksandr , Magomedov Fahretdin , Kurbakov Ivan , Kurbakova Mariya

DOI

https://doi.org/10.12737/42654

Published

17.03.2021

MODELING MILK YIELD OF CATTLE BREED WHEN CHANGING TECHNOLOGICAL PROCESSES

Volume, issue

6 № 1 Published

Authors

Konovalov Vladimir , Teryushkov Vyacheslav , Petrova Svetlana

DOI

https://doi.org/10.12737/42655

Published

17.03.2021

MANURE EXTRUSION FROM HIGH-MOISTURE POULTRY WASTE

Volume, issue

6 № 2 Published

Authors

Frolov Dmitrii , Kurochkin Anatoliy , Potapov Maksim

DOI

https://doi.org/10.12737/44166

Published

20.05.2021

STUDY OF HERMETIC ABILITY OF A COMBINED FERROFLUIDIC SEALED OF BEARING ASSEMBLIES

Volume, issue

6 № 2 Published

Authors

Terentyev Vladimir , Bausov Aleksei , Toropov Mihail

DOI

https://doi.org/10.12737/44167

Published

20.05.2021

OPTIMIZATION OF PARAMETERS OF POWERED TILLAGE TOOL WITH SOIL SPIKERS

Volume, issue

6 № 3 Published

Authors

Savelyev Yriy , Kirov Yuri , Ishkin Pavel , Petrov Mikhail

DOI

https://doi.org/10.12737/45050

Published

13.07.2021

OPTIMIZATION OF DESIGN AND PROCESS PARAMETERS OF THE PEG-WHEEL FEED

Volume, issue

6 № 3 Published

Authors

Syrkin Vladimir Anatol'evich , Mashkov Sergei , Ishkin Pavel , Vasilev Sergey Ivanovich

DOI

https://doi.org/10.12737/45055

Published

13.07.2021

THEORETICAL JUSTIFICATION OF DESIGN AND PROCESS DEPENDENT PARAMETERS OF A SUPPLY PORT OF A BELT FEED WITH DISKS

Volume, issue

6 № 3 Published

Authors

Kryucina Natal'y , Mishanin Aleksandr , Mashkov Sergei , Shukov Aleksandr

DOI

https://doi.org/10.12737/45059

Published

13.07.2021

IMPROVING ENERGY EFFICIENCY OF SOIL TREATMENT USING TRACTION DRIVEN TILLAGE IMPLEMENT

Volume, issue

6 № 4 Published

Authors

Mashkov Sergei , Petrov Mikhail , Shakhov Vladimir , Ishkin Pavel

DOI

https://doi.org/10.12737/46335

Published

21.10.2021

ANALYSIS OF MASSAGE DEVICE OPERATION ON THE BASIS OF PNEUMATIC ELEMENTS FOR HEIFER UDDER

Volume, issue

6 № 4 Published

Authors

Kurochkin Anatoliy , Frolov Dmitriy

DOI

https://doi.org/10.12737/46343

Published

21.10.2021

DETERMINATION OF INFLUENCE OF ELECTROMAGNETIC INDUCTOR FREQUENCY ON ELECTRIC HEATER FOR FAT CLARIFYING

Volume, issue

6 № 4 Published

Authors

Kirov Yuri , Mashkov Sergei , Kudryakov Evgeny , Syrkin Vladimir Anatol'evich

DOI

https://doi.org/10.12737/46344

Published

21.10.2021

INFLUENCE OF DIMENSIONAL CHARACTERISTICS OF THE EXTRUDER MATRIX ON THE PROPERTIES OF EXTRUDATE

Volume, issue

7 № 1 Published

Authors

Kurochkin Anatoliy , Frolov Dmitriy

DOI

https://doi.org/

Published

17.10.2023

ADVANCED ENGINEERING AND TECHNOLOGY FOR APPLICATION OF LIQUID NITROGEN CHEMICAL FERTILIZER CARBOMIDE-AMMONIA MIXTURE BASED

Volume, issue

7 № 1 Published

Authors

Milyutkin Vladimir Aleksandrovich , Ivanov Vitaliy Aleksandrovich , Popov Artem

DOI

https://doi.org/10.55471/19973225_2022_7_1_38

Published

17.10.2023

RESEARCHES RESULTS OF CONSTRUCTIVE AND TECHNOLOGICAL PARAMETERS OF THE DISK AND BAYONET SOWING DEVICE INFLUENCE FOR OF DISPENSING SEEDS UNIFORMITY

Volume, issue

2 № 4 Published

Authors

Kryuchin Nikolay , Kryuchin Aleksandr

DOI

https://doi.org/10.12737/18583

Published

02.11.2017

INFORMATION TECHNOLOGY APPLICATION WHEN THE FIT CONNECTIONS PROBABILISTIC DEFINITION

Volume, issue

3 № 3 Published

Authors

Konovalov Vladimir , Dontsova Marina

DOI

https://doi.org/10.12737/22349

Published

22.08.2018

ADAPTATION OF THE AUTOMOTIVE DIESEL ENGINE TO OPERATE ON SOY AND MINERAL FUEL

Volume, issue

3 № 4 Published

Authors

Volod’ko Oleg , Bychenin Aleksandr , Erzamaev Maksim , Ukhanova Yuliy

DOI

https://doi.org/10.12737/23611

Published

17.10.2018

THE AUTOMATIC CONTROL SYSTEM FOR OPERATION OF PETROL INJECTION ENGINE AT IDLE APEED MODE

Volume, issue

2 № 4 Published

Authors

Ukhanov Denis Aleksandrovich , Ukhanov Aleksandr , Muhataev Nikolay

DOI

https://doi.org/10.12737/18587

Published

02.11.2017

THE CALCULATION OF HYDRAULIC PRESS EFFORT TO BUILD CONNECTIONS OF PARTS BY TENSION

Volume, issue

3 № 3 Published

Authors

Simanin Nikolay Alekseevich , Konovalov Vladimir , Rodionov Yuryi

DOI

https://doi.org/10.12737/22348

Published

22.08.2018

INFLUENCE OF SLIPPING MODES OF THE WHEELED RUNNING GEAR OF MTU POWER MEANS ONTO PHYSICAL PROPERTIES OF THE SOIL

Volume, issue

3 № 4 Published

Authors

Chernikov Oleg , Bychenin Aleksandr

DOI

https://doi.org/10.12737/23612

Published

17.10.2018

INFLUENCE OF OLEIC ACID FOR AUTOTRACTOR DIESEL FUEL TRIBOLOGICAL PROPERTIES

Volume, issue

2 № 4 Published

Authors

Bychenin Aleksandr , Volod’ko Oleg , Erzamaev Maksim , Sazonov Dmitriy

DOI

https://doi.org/10.12737/18608

Published

02.11.2017

TEORETICAL EVALUATION OF ANNULAR CLEARANCE CHANGE IN PLUNGER PAIRS OF HPFP (HIGH PRESSURE FUEL PUMPS) DEPENDING ON THE AMOUNT OF CAMELINA OIL IN COMPOSITE CAMELINA-MINERAL FUEL

Volume, issue

3 № 4 Published

Authors

Ukhanov Aleksandr , Rotanov Evgeny , Khokhlov Anton Alekseevich

DOI

https://doi.org/10.12737/23613

Published

17.10.2018

FERTILIZER OF SWEET PEPPER IN NON-DISTRIBUTION CULTURE ON LIGHT-CHESTNUT SOILS OF VOL-GOGRAD REGION

Volume, issue

2 № 4 Published

Authors

Kalmykova Elena , Petrov Nikolay

DOI

https://doi.org/10.12737/18544

Published

02.11.2017

REACTIONS DETERMINATION OF THE WHEEL TRAILER MOUNTING LINKAGE

Volume, issue

2 № 4 Published

Authors

Zaitsev Vladimir , Konovalov Vladimir , Vol’nikov Mikhail , Mashkov Sergei

DOI

https://doi.org/10.12737/18609

Published

02.11.2017

DETERMINATION OF DOWNLOADING OF AUTOTRACTOR DIESEL WITH GAS-TURBINE BACKGROUND ON THE TEMPERATURE OF WORKED GASES AND THE FREQUENCY OF ROTATION OF THE TURBOCHOMPRESSOR SHAFT

Volume, issue

3 № 4 Published

Authors

Inshakov Aleksandr , Kurbakov Ivan , Kurbakova Mariya , Garanin Sergei

DOI

https://doi.org/10.12737/23614

Published

17.10.2018

SIMULATION OF THE COMPARENT MIXING DURATION ACCORDING TO LESS COMPONENT PORTION

Volume, issue

2 № 4 Published

Authors

Fomina Mariya , Chupshev Aleksey , Teryushkov Vyacheslav , Konovalov Vladimir

DOI

https://doi.org/10.12737/18612

Published

02.11.2017

TEST BED FOR CHECKING WORK CAPACITY OF TURBOCHARGERS OF AUTOTRACTOR ENGINES

Volume, issue

3 № 4 Published

Authors

Inshakov Aleksandr , Kurbakov Ivan , Kurbakova Mariya , Ladikov Sergey

DOI

https://doi.org/10.12737/23615

Published

17.10.2018

THEORETICAL JUSTIFICATION OF THE SEEDS MOVEMENT ALONG THE RECEPTION TRAY OF THE EXPERIMENTAL SELECTIVE PNEUMATIC SEEDING MACHINE

Volume, issue

3 № 4 Published

Authors

Mashkov Sergei , Syrkin Vladimir Anatol'evich

DOI

https://doi.org/10.12737/23616

Published

17.10.2018

THE CHARACTERISTICS OF THE LOAD BEARING COMPONENT MOBILE TRAILER AT CROSS SLOPE

Volume, issue

3 № 4 Published

Authors

Zaitsev Vladimir , Konovalov Vladimir , Petrova Svetlana

DOI

https://doi.org/10.12737/23621

Published

17.10.2018

THEORETICAL RESEARCH OF THE ROTOR WHEEL OF THE REAPING MACHINE

Volume, issue

3 № 4 Published

Authors

Fedin Michael , Kukharev Oleg , Semov Ivan

DOI

https://doi.org/10.12737/23622

Published

17.10.2018

POWER DETERMINATION TO THE DRIVE OF MILKCHURNS WITH THE FLEXIBLE VIBRODRIVE

Volume, issue

3 № 4 Published

Authors

Yashin Aleksandr , Polyvyany Yrii , Mishanin Aleksandr , Horev Pavel

DOI

https://doi.org/10.12737/23623

Published

17.10.2018

IMPROVEMENT OF DETAILS CONNECTION ASSEMBLY TECHNOLOGY WITH INTERFERENCE

Published

Volume 1 №2

Konovalov Vladimir , Simanin Nikolay Alekseevich , Petrova Svetlana

Published 05.05.2016

THE DEVICES FOR THE TRANSPORT DIESEL ENGINES CONSTRUCTIVE ADAPTATION FOR THEIR OPERATION BY BIODIESEL FUEL

Published

Volume 1 №2

Ukhanov Aleksandr , Ukhanov Denis Aleksandrovich , Khokhlova Ekaterina Alekseevna , Khokhlov Anton Alekseevich

Published 05.05.2016

ANALYTICAL ASPECTS OF GRAVITY MIXING DRUM DEVICES

Published

Volume 1 №2

Dimitriev Nikolay , Konovalov Vladimir , Teryushkov Vyacheslav , Chupshev Aleksey

Published 05.05.2016

DIESEL MIXED FUEL: PROBLEMS AND INNOVATIVE INVENTIONS

Published

Volume 1 №2

Ukhanov Denis Aleksandrovich , Ukhanov Aleksandr , Adgamov Irfan Fyarhatevich

Published 05.05.2016

STAND FOR RUNNING AND TESTING OF LOW POWER MOBILE FARM MACHINERY ENGINES

Published

Volume 1 №2

Baykov Dmitriy Vladimirovich , Inshakov Aleksandr , Desyaev Sergey Sergeevich

Published 05.05.2016

METHODS AND MEANS OF BATTERIES WORKING CAPACITY CHECKING

Published

Volume 1 №2

Desyaev Sergey Sergeevich , Inshakov Aleksandr , Baykov Dmitriy Vladimirovich

Published 05.05.2016

MODELING OF PNEUMATIC DEVICES FOR MASSAGE OF THE UDDER OF SINGLE-CHAMBER TYPE HEIFERS

Published

Volume 1 №4

Kurochkin Anatoliy , Frolov Dmitriy

Published 27.10.2016

CELL BATTERY NATURAL COLD FOR COOLING MILK ON FARMS

Published

Volume 1 №4

Kozlovtsev Andrey Petrovich , Kvashennikov Vasiliy Ivanovich , Konstantinov Mikhail Maerovich , Kozlovtseva Svetlana Petrovna

Published 27.10.2016

THE RESULTS OF STUDIES OF THE CRACKS DEVELOPMENT IN THE CYLINDER HEADS OF THE ENGINE YAMZ-238НБ

Published

Volume 1 №4

Cherkashin Nikolay Aleksandrovich , Zhiltsov Sergey

Published 27.10.2016

JUSTIFICATION OF ROTOR SPEED OF RADIAL HONEY SEPARATOR WITH THE HORIZONTAL FULCRUM PIN

Published

Volume 1 №4

Syrkin Vladimir Anatol'evich , Vasilev Sergey Ivanovich

Published 27.10.2016

THE INFLUENCE OF EXTRUSION PROCESSING FOR CHEMICAL COMPOSITION AND FUNCTIONAL AND TECHNOLOGICAL PROPERTIES OF PUMPKIN SEEDS

Published

Volume 1 №4

Shaburova Galina Vasil'evna , Sheshnizan Irina Nikolaevna , Voronina Polina Konstantinovna

Published 27.10.2016

THEORETICAL SUBSTANTIATION OF CONSTRUCTIVE AND REGIME PARAMETERS OF MECHANICAL CELLULAR-DISK SOWING DEVICE FOR SOWING AMARANTH PANICULATE

Published

Volume 1 №4

Artamonov Evgenij Ivanovich , Kotov Dmitriy Nikolaevich , Artamonova Olga Aleksandrovna

Published 27.10.2016

THE ROTARY DRUM MIXER OPERATION PROCESS MODEL AND THEORETICAL JUSTIFICATION OF ITS PARAMETERS

Published

Volume 2 №1

Dimitriev Nikolay , Konovalov Vladimir , Teryushkov Vyacheslav , Chupshev Aleksey

Published 20.02.2017

DETERMINATION OF BLADED PLATE KEEPER DESIGN DATA OF CREAM SEPARATOR

Published

Volume 2 №1

Yashin Aleksandr , Mishanin Aleksandr , Semov Ivan Nikolaevich , Horev Pavel

Published 20.02.2017

THE INFLUENCE OF THE MEASURING CONVERTERS CHARACTERISTICS FOR THE DETAILS PROCESSING ACCU-RACY IN MACHINE TOOLS WITH MULTI-LOOP CONTROL SYSTEMS

Published

Volume 2 №1

Simanin Nikolay Alekseevich , Konovalov Vladimir , Petrova Svetlana

Published 20.02.2017

DEVELOPMENT OF AUTOMATION SYSTEM OF THE FERTILIZERS DIFFERENTIATED APPLICATION

Published

Volume 2 №1

Kanaev Mikhail , Karpov Oleg , Vasilev Sergey , Fathutdinov Marat

Published 20.02.2017

RESULTS OF FIELD SURVEYS OF EXPERIMENTAL SELECTION SEEDER WITH THE BOBBIN AND BAYONET SOWING DEVICE

Published

Volume 2 №2

Mashkov Sergei , Syrkin Vladimir Anatol'evich

Published 20.04.2017

REDUCTION OF SPECIFIC ENERGY CONSUMPTION FOR GRAIN DRYING DEPLOYMENT CONTACT TYPE

Published

Volume 2 №2

Sutyagin Sergey , Kurdyumov Vladimir , Pavlushin Andrey , Dolgov Vladimir

Published 20.04.2017

EXPERIMENTAL RESEARCH OF THE COMBINED DEVICE FOR MASSAGE OF HEIFERS UDDER

Published

Volume 2 №2

Kurochkin Anatoliy

Published 20.04.2017

INFLUENCE OF VEGETABLE COMPONENTS FOR TRIBOLOGICAL PROPERTIES OF FUELS FOR AUTOTRACTOR DIESELS

Published

Volume 2 №3

Bychenin Aleksandr , Chernikov Oleg , Prikazchikov Maksim

Published 27.07.2017

FEATURES OF THE DIESEL RUNNING BY CAMELINA-MINERAL FUEL IN THE MODE OF INDEPENDENT IDLING

Published

Volume 2 №3

Ukhanov Aleksandr , Ukhanov Denis Aleksandrovich , Sidorov Evgeniy , Yakunin Aleksandr

Published 27.07.2017

THEORETICAL RESEARCH OF THE SCAFFOLDER AND SOIL INTERACTION

Published

Volume 2 №3

Kanaev Mikhail , Karpov Oleg , Vasilev Sergey , Fathutdinov Marat

Published 27.07.2017

SUBSTANTIATION OF THE PARAMETERS OF TILLAGE RINK

Published

Volume 2 №3

Sharonov Ivan Aleksandrovich , Kurdyumov Vladimir , Kurushin Viktor , Proshkin Vyacheslav

Published 27.07.2017

INFLUENCE OF PLOUGH WORKING BODIES KEY PARAMETERS FOR THE QUALITY OF TIERED PLOWING

Published

Volume 2 №3

Erzamaev Maksim , Sazonov Dmitriy , Mustyakimov Rail' , Strel'cov Sergey

Published 27.07.2017

USING OF ACCELERATION CHARACTERISTICS OF THE ENGINE AND THE TURBOCHARGER FOR SUPERCHARGING SYSTEM DIAGNOSING

Published

Volume 2 №3

Inshakov Aleksandr , Kurbakov Ivan , Kurbakova Mariya

Published 27.07.2017

THE EFFECT OF MIXING DURATION AND THE PROPORTION OF SMALLER COMPONENT FOR THE PERFORMANCE OF THE PADDLE MIXER RUNNING WITH EXTRA BLADES

Published

Volume 2 №3

Fomina Mariya , Konovalov Vladimir , Teryushkov Vyacheslav , Chupshev Aleksey

Published 27.07.2017

TECHNOLOGY, MEANS OF MECHANIZATION AND POWER EQUIPMENT IN AGRICULTURE

Published

Volume 3 №1

Kurochkin Anatoli

Published 05.04.2018

THE INFLUENCE OF TILLAGE LONGLINE PROCESS PARAMETERS FOR ENERGY OUTLAY

Published

Volume 3 №2

Erzamaev Maksim , Sazonov Dmitriy , Nesterov Evgenii , Zhiltsov Sergey

Published 18.05.2018

SOIL STRUCTURE AND HARDNESS CHANGE RESULTING FROM THE DEPTH OF A TRACTOR TRACK UNDER DIFFERENT WHEEL DRIVE TOWING STRENGTH

Published

Volume 4 №1

Chernikov Oleg , Bychenin Aleksandr , Sazonov Dmitriy

Published 14.03.2019

DETERMINATION OF AUGER-BLADE MIXER RATIONAL PARAMETERS

Published

Volume 4 №1

Khol'shev Nikolai , Mukhin Viktor , Petrova Svetlana

Published 14.03.2019

INFLUENCE OF DESIGN OPERATING AND TECHNOLOGICAL PARAMETERS OF AUGER-BLADE MIXER ON POWER CONSUMED BY IT

Published

Volume 4 №1

Khol'shev Nikolai , Mukhin Viktor , Petrova Svetlana

Published 14.03.2019

THEORETICAL UNDERPINNING OF FIELDS MAPPING AUTOMATION FOR IMPROVEMENT OF THE WAY OF SOIL SAMPLIN

Published

Volume 4 №1

Vasilev Sergey Ivanovich , Mashkov Sergei , Kruychin Pavel

Published 14.03.2019

AUTOMATION CONTROL EQUIPMENT FOR MATERIAL WINDING INTO A ROLL

Published

Volume 4 №1

Simanin Nikolay Alekseevich , Konovalov Vladimir , Lyandenburskiy Vladimir

Published 14.03.2019

THE INFLUENCE OF MIXER ROTATION FREQUENCY AND ITS BLADES LENGTH ON THE QUALITY OF THE MIXTURE

Published

Volume 4 №1

Fomina Mariya , Chupshev Aleksey , Teryushkov Vyacheslav , Konovalov Vladimir

Published 14.03.2019

ANALYTICAL DESCRIPTION OF THE MIXER PERFORMANCE FOR BULK MATERIALS WITH SCREW BLADES

Published

Volume 4 №1

Borisova Marina , Novikov Vladimir , Konovalov Vladimir

Published 14.03.2019

DETERMINATION OF RATIONAL METHOD OF HEATING OF MIXED MINERAL AND VEGETABLE FUELS FOR AUTOMOTIVE DIESEL ENGINES

Published

Volume 4 №2

Volod’ko Oleg , Bychenin Aleksandr , Chernikov Oleg

Published 20.05.2019

ULTRASOUND: ADVANTAGE FOR APPLICATION AND TECHNICAL MEANS

Published

Volume 4 №2

Ukhanova Yuliy , Perova Natal'y , Ukhanov Aleksandr

Published 20.05.2019

EXPERIMENTAL DETERMINATION OF THE CHARACTERISTICS OF THE ROLLER BRAKE TESTER FOR RUNNING OF SMALL-BASED ENGINES OF AGRICULTURAL EQUIPMENT IN COLD REGIMES

Published

Volume 4 №2

Inshakov Aleksandr , Baykov Dmitriy Vladimirovich , Kurbakov Ivan , Golyshev Mikhail

Published 20.05.2019

THEORETICAL STUDY OF THE WORK OF THE TRACTOR DIESEL IN APPLYING DIESEL MIXTURE FUEL BASED ON RICINIC OIL

Published

Volume 4 №2

Sadov Artem , Denezhko Lyubov' , Novopashin Leonid

Published 20.05.2019

THE SPEED MODE OF AEROPRODUCT FLOW WITH PARALLEL-SEQUENTIAL SECTIONS

Published

Volume 4 №2

Kravtsov Artem , Konovalov Vladimir , Zaitsev Vladimir , Dontsova Marina

Published 20.05.2019

IMPROVEMENT OF EXTRUDER WORKING PROCESS WITH TERMOVACUAL EFFECT

Published

Volume 4 №2

Kurochkin Anatolii A Alekseevich

Published 20.05.2019

CONTROL OF TECHNICAL CONDITION OF HYDRAULIC UNIT OF AUTOMATIC TRANSMISSION

Published

Volume 4 №3

Ekimov Petr , Fakhrutdinov Idel' , Lyandenburskiy Vladimir , Konovalov Vladimir

Published 12.07.2019

SUBSTANTIATION OF NEEDLE SHAPE OF TRACTION-DRIVEN TILLAGE TOOLS

Published

Volume 4 №4

Savelyev Yriy , Mashkov Sergei , Ishkin Pavel , Petrov Mikhail

Published 17.10.2019

EFFECT OF ANTI-CORROSION INHIBITORS ON PROTECTION PERFORMANCE OF AUTO BODY ELEMENTS

Published

Volume 5 №1

Sazonov Dmitriy , Erzamaev Maksim , Zhiltsov Sergey , Bychenin Aleksandr

Published 25.03.2020

FUNCTIONAL DIAGRAM OF THE SOWING UNIT BASED ON A PNEUMATICCALLY OPERATED SEEDER

Published

Volume 5 №1

Kravtsov Artem , Konovalov Vladimir , Kuchmasov Kuhmaz , Zaitsev Vladimir

Published 25.03.2020

PRESSURE ACCUMULATOR DISCHARGE EFFECT ON GEAR SHIFT WITH HYDRAULIC CONTROL BOX

Published

Volume 5 №3

Volod’ko Oleg , Bychenin Aleksandr , Chernikov Oleg

Published 15.07.2020

OPTIMIZATION OF HOLES IN THE MATRIX OF A SINGLE-SCREW EXTRUDER FOR PROCESSING OF POULTRY MANURE

Published

Volume 5 №4

Potapov Maksim , Frolov Dmitriy , Kurochkin Anatoliy

Published 16.10.2020

DETERMINATION OF THE ROTARY DRUM MIXER DRIVE POWER

Published

Volume 5 №4

Fudin Konstantin , Konovalov Vladimir , Teryushkov Vyacheslav

Published 16.10.2020

INVESTIGATION OF FRICTION IN MAGNETIC FLUID SEAL

Published

Volume 6 №1

Terentyev Vladimir , Bausov Aleksei , Toropov Mihail

Published 17.03.2021

ORGANIZATION OF CONTROL AND RECORDING SYSTEM FOR TRANSIENTS IN AN INTERNAL COMBUSTION ENGINE BASED ON THE L-CARD E14-140 ANALOG-TO-DIGITAL CONVERTER AND THE POWERGRAPH SOFTWARE PACKAGE

Published

Volume 6 №1

Inshakov Aleksandr , Magomedov Fahretdin , Kurbakov Ivan , Kurbakova Mariya

Published 17.03.2021

MODELING MILK YIELD OF CATTLE BREED WHEN CHANGING TECHNOLOGICAL PROCESSES

Published

Volume 6 №1

Konovalov Vladimir , Teryushkov Vyacheslav , Petrova Svetlana

Published 17.03.2021

MANURE EXTRUSION FROM HIGH-MOISTURE POULTRY WASTE

Published

Volume 6 №2

Frolov Dmitrii , Kurochkin Anatoliy , Potapov Maksim

Published 20.05.2021

STUDY OF HERMETIC ABILITY OF A COMBINED FERROFLUIDIC SEALED OF BEARING ASSEMBLIES

Published

Volume 6 №2

Terentyev Vladimir , Bausov Aleksei , Toropov Mihail

Published 20.05.2021

OPTIMIZATION OF PARAMETERS OF POWERED TILLAGE TOOL WITH SOIL SPIKERS

Published

Volume 6 №3

Savelyev Yriy , Kirov Yuri , Ishkin Pavel , Petrov Mikhail

Published 13.07.2021

OPTIMIZATION OF DESIGN AND PROCESS PARAMETERS OF THE PEG-WHEEL FEED

Published

Volume 6 №3

Syrkin Vladimir Anatol'evich , Mashkov Sergei , Ishkin Pavel , Vasilev Sergey Ivanovich

Published 13.07.2021

THEORETICAL JUSTIFICATION OF DESIGN AND PROCESS DEPENDENT PARAMETERS OF A SUPPLY PORT OF A BELT FEED WITH DISKS

Published

Volume 6 №3

Kryucina Natal'y , Mishanin Aleksandr , Mashkov Sergei , Shukov Aleksandr

Published 13.07.2021

IMPROVING ENERGY EFFICIENCY OF SOIL TREATMENT USING TRACTION DRIVEN TILLAGE IMPLEMENT

Published

Volume 6 №4

Mashkov Sergei , Petrov Mikhail , Shakhov Vladimir , Ishkin Pavel

Published 21.10.2021

ANALYSIS OF MASSAGE DEVICE OPERATION ON THE BASIS OF PNEUMATIC ELEMENTS FOR HEIFER UDDER

Published

Volume 6 №4

Kurochkin Anatoliy , Frolov Dmitriy

Published 21.10.2021

DETERMINATION OF INFLUENCE OF ELECTROMAGNETIC INDUCTOR FREQUENCY ON ELECTRIC HEATER FOR FAT CLARIFYING

Published

Volume 6 №4

Kirov Yuri , Mashkov Sergei , Kudryakov Evgeny , Syrkin Vladimir Anatol'evich

Published 21.10.2021

INFLUENCE OF DIMENSIONAL CHARACTERISTICS OF THE EXTRUDER MATRIX ON THE PROPERTIES OF EXTRUDATE

Published

Volume 7 №1

Kurochkin Anatoliy , Frolov Dmitriy

Published 17.10.2023

ADVANCED ENGINEERING AND TECHNOLOGY FOR APPLICATION OF LIQUID NITROGEN CHEMICAL FERTILIZER CARBOMIDE-AMMONIA MIXTURE BASED

Published

Volume 7 №1

Milyutkin Vladimir Aleksandrovich , Ivanov Vitaliy Aleksandrovich , Popov Artem

Published 17.10.2023

RESEARCHES RESULTS OF CONSTRUCTIVE AND TECHNOLOGICAL PARAMETERS OF THE DISK AND BAYONET SOWING DEVICE INFLUENCE FOR OF DISPENSING SEEDS UNIFORMITY

Published

Volume 2 №4

Kryuchin Nikolay , Kryuchin Aleksandr

Published 02.11.2017

INFORMATION TECHNOLOGY APPLICATION WHEN THE FIT CONNECTIONS PROBABILISTIC DEFINITION

Published

Volume 3 №3

Konovalov Vladimir , Dontsova Marina

Published 22.08.2018

ADAPTATION OF THE AUTOMOTIVE DIESEL ENGINE TO OPERATE ON SOY AND MINERAL FUEL

Published

Volume 3 №4

Volod’ko Oleg , Bychenin Aleksandr , Erzamaev Maksim , Ukhanova Yuliy

Published 17.10.2018

THE AUTOMATIC CONTROL SYSTEM FOR OPERATION OF PETROL INJECTION ENGINE AT IDLE APEED MODE

Published

Volume 2 №4

Ukhanov Denis Aleksandrovich , Ukhanov Aleksandr , Muhataev Nikolay

Published 02.11.2017

THE CALCULATION OF HYDRAULIC PRESS EFFORT TO BUILD CONNECTIONS OF PARTS BY TENSION

Published

Volume 3 №3

Simanin Nikolay Alekseevich , Konovalov Vladimir , Rodionov Yuryi

Published 22.08.2018

INFLUENCE OF SLIPPING MODES OF THE WHEELED RUNNING GEAR OF MTU POWER MEANS ONTO PHYSICAL PROPERTIES OF THE SOIL

Published

Volume 3 №4

Chernikov Oleg , Bychenin Aleksandr

Published 17.10.2018

INFLUENCE OF OLEIC ACID FOR AUTOTRACTOR DIESEL FUEL TRIBOLOGICAL PROPERTIES

Published

Volume 2 №4

Bychenin Aleksandr , Volod’ko Oleg , Erzamaev Maksim , Sazonov Dmitriy

Published 02.11.2017

TEORETICAL EVALUATION OF ANNULAR CLEARANCE CHANGE IN PLUNGER PAIRS OF HPFP (HIGH PRESSURE FUEL PUMPS) DEPENDING ON THE AMOUNT OF CAMELINA OIL IN COMPOSITE CAMELINA-MINERAL FUEL

Published

Volume 3 №4

Ukhanov Aleksandr , Rotanov Evgeny , Khokhlov Anton Alekseevich

Published 17.10.2018

FERTILIZER OF SWEET PEPPER IN NON-DISTRIBUTION CULTURE ON LIGHT-CHESTNUT SOILS OF VOL-GOGRAD REGION

Published

Volume 2 №4

Kalmykova Elena , Petrov Nikolay

Published 02.11.2017

REACTIONS DETERMINATION OF THE WHEEL TRAILER MOUNTING LINKAGE

Published

Volume 2 №4

Zaitsev Vladimir , Konovalov Vladimir , Vol’nikov Mikhail , Mashkov Sergei

Published 02.11.2017

DETERMINATION OF DOWNLOADING OF AUTOTRACTOR DIESEL WITH GAS-TURBINE BACKGROUND ON THE TEMPERATURE OF WORKED GASES AND THE FREQUENCY OF ROTATION OF THE TURBOCHOMPRESSOR SHAFT

Published

Volume 3 №4

Inshakov Aleksandr , Kurbakov Ivan , Kurbakova Mariya , Garanin Sergei

Published 17.10.2018

SIMULATION OF THE COMPARENT MIXING DURATION ACCORDING TO LESS COMPONENT PORTION

Published

Volume 2 №4

Fomina Mariya , Chupshev Aleksey , Teryushkov Vyacheslav , Konovalov Vladimir

Published 02.11.2017

TEST BED FOR CHECKING WORK CAPACITY OF TURBOCHARGERS OF AUTOTRACTOR ENGINES

Published

Volume 3 №4

Inshakov Aleksandr , Kurbakov Ivan , Kurbakova Mariya , Ladikov Sergey

Published 17.10.2018

THEORETICAL JUSTIFICATION OF THE SEEDS MOVEMENT ALONG THE RECEPTION TRAY OF THE EXPERIMENTAL SELECTIVE PNEUMATIC SEEDING MACHINE

Published

Volume 3 №4

Mashkov Sergei , Syrkin Vladimir Anatol'evich

Published 17.10.2018

THE CHARACTERISTICS OF THE LOAD BEARING COMPONENT MOBILE TRAILER AT CROSS SLOPE

Published

Volume 3 №4

Zaitsev Vladimir , Konovalov Vladimir , Petrova Svetlana

Published 17.10.2018

THEORETICAL RESEARCH OF THE ROTOR WHEEL OF THE REAPING MACHINE

Published

Volume 3 №4

Fedin Michael , Kukharev Oleg , Semov Ivan

Published 17.10.2018

POWER DETERMINATION TO THE DRIVE OF MILKCHURNS WITH THE FLEXIBLE VIBRODRIVE

Published

Volume 3 №4

Yashin Aleksandr , Polyvyany Yrii , Mishanin Aleksandr , Horev Pavel

Published 17.10.2018

Articles of rubric " TECHNOLOGY, MEANS OF MECHANIZATION AND POWER EQUIPMENT IN AGRICULTURE " of journal " BULLETIN SAMARA STATE AGRICULTURAL ACADEMY "

Confirmation

Регистрация