p.g.t. Ust'-Kinel'skiy, Samara, Russian Federation
p.g.t. Ust'-Kinel'skiy, Samara, Russian Federation
p. Oktyabr'skiy, Ulyanovsk, Russian Federation
p. Oktyabr'skiy, Ulyanovsk, Russian Federation
The purpose of the research is improvement of soil level processing quality by justification of key parameters of working bodies of the combined plow. The combined plow consisting of a frame and sections of working bodies is developed for realization of technological process of level processing of the soil with loosening of the subarable horizon. The working section supports the movements of the unit which are consistently established in the direction plow cases of the top tier with a ploughshare surface and the lower tier without ploughshare surface, containing a chisel and dump surface. For implementation of agrotechnical requirements to level processing of the soil the theoretical research on installation of depth of the course of cases of the top and lower tiers of the combined plow is conducted. The interrelation of bottom crests height of furrow from arrangement of working bodies in section and the angle of shift of the soil is investigated by chisel in the case of the lower tier. The distance between the case of the top tier and the case of the lower tier of the combined plow in the longitudinal plane for ensuring the free movement of the soil and stubble is proved. The carried-out theoretical justification and settlement and graphic determination of constructive parameters of working section cases of the combined plow are shown that their rational values are equal: width of capture of cases of the top and lower tier – 0.45 m; chisel width – 0.07 m; an interval of arrangement of working bodies on a plow – 0.45 m; distance between the case of the top tier and the case of the lower tier of the combined level plow – 0.55 m; depth of the course of the case of the top tier – 0.06- 0.18 m; the layer height which is cut out by the case of the lower tier – 0.25-0.35 m; processing depth chisel – 0.06-0.08 m.
soil, processing, tiered, combined, options, plow, depth
1. Gnilomedov, V. G. The combined level plow / V. G. Gnilomedov, M. P. Erzamayev, D. S. Sazonov // The Rural machine operator. - 2014. - №10. - P. 20-21.
2. Erzamayev, M. P. Technological features of introduction to a crop rotation temporarily raw of lands / V. G. Gnilomyodov, M. P. Erzamayev, T. N. Sazonova // Achievement of science to agro-industrial complex : collection of sciens works. - Samara : PC SSAA, 2014. - P. 252-256.
3. Gnilomedov, V. G. Justification of traction resistance of the combined plow for level processing of the soil / V. G. Gnilomedov, D. S. Sazonov, M. P. Erzamayev // Bulletin Samara state agricultural academy. - 2013. - №3. - P. 8-13.
4. Nesterov, E. S. Plowing resistance of chisel working tool / V. M. Boykov, E. S. Nesterov, S. V. Startsev, K. K. Okas // Science Review. - Saratov : LLC Amirit, 2017. - №5. - P. 72-77.
5. Nesterov, E. S. Process design and tillage tools for primary tillage : dis. … cand of techn. sciences : 05.20.01 / Nesterov Evgeniy Sergeevich. - Saratov, 2011. - 197 р.
6. Artamonov, E. I. Prospects and experience of cultivation of an amaranth with use of the new sowing device / V. F. Kazarin, I. Yu. Galenko, E. I. Artamonov // Bulletin Samara SSHA. - 2013. - №4. - P. 41-44.
7. Ivanaysky, S. A. Working body for preseeding processing of the soil / S. A. Ivanaysky, O. M. Parfyonov // Urgent problems of agrarian science and way of their decision : collection of sciens works. - Kinel : PC SSAA, 2016. - P. 364-366.
8. Vasilyev, S. A. Development of the system of automation of the differentiated application of fertilizers at crops / S. A. Vasilyev, M. A. Kanayev, O. V. Karpov, M. R. Fatkhutdinov // Bulletin of the Samara state agricultural academy. - 2017. - №1. - P. 58-62.
