FSBEI HE Penza SAU (department «Technical service of machines»)
Penza, Penza, Russian Federation
Penza, Penza, Russian Federation
Penza, Penza, Russian Federation
Penza, Penza, Russian Federation
The purpose of research is justification of area efficiency of the proposed mixer with vertical shaft and paddle stirrer, the edges of the blades which are fixed sinusoidal blades. Research has shown that, by virtue of the kinetics of mixing all the mixers in the early period mixing significantly improve the quality of the mixture, after which stabilization of the quality indicators, and in some cases starts and segregation of the mixture. The nature of the change of the uniformity of the mixture is kind of exponential time mixing. In this connection there is the task of identifying areas of efficiency and opportunities the application of paddle mixer proposed design for the preparation of dry feed mixtures. Important manufacturing concentrate mixtures (compaund feeds, feed concentrates or forage medicinal mixtures) based on the purchase of BVD and your own forage. Purpose: the establishment of functional dependence between the technological parameters of the mixer (the proportion of the control component and the duration of mixing) and process performance (uneven mix and adjusted intensity of mixing taking into account the uniformity of the mixture); identifying rational values of technological parameters of the mixer, providing the desired quality mix and minimum energy intensity of mixing. It is provided the description and structural diagram mixer dry material batch. The technique is described and results of experimental studies of the mixer. It is presented the expressions describing the unevenness of the mix and the energy intensity of stirring, depending on the proportion of the control component and the duration of mixing; the required duration of mixing depending on the proportion of the control component. It is built two-dimensional section of the surface response in the studied parameters. Based on the analysis of the given graphs justifies the area efficiency of the mixer: the proportion of the control component is not less than 3%; when the portion of the control component 5% duration of mixing – 300 s, when the portion of the control component 10% the duration of the mixing – 200 s.
mixing, unevenness, mixer, blade, energy, duration
1. Syrovatka, V. I. Efficient use of resources in the production of mixed feed on farms // Machinery and equipment for the village. - 2011. - № 6. - P. 22-25.
2. Chupshev, A. V. Optimization of the mixer settings at a minimum energy intensity mixing / A. V. Chupshev, V. V. Konovalov, S. S. Petrova // Bulletin of the Samara State Agricultural Academy. - 2009. - № 3. - P. 72-76.
3. Chupshev, A. V. On the justification of the parameters of high-speed mixer / A. V. Chupshev, V. V. Konovalov, V. P. Teryushkov, S. S. Petrova // Bulletin of the Samara State Agricultural Academy. - 2008. - № 3. - P. 151-154.
4. Bormotov, A. N. Mathematical modeling by the boundary points of the planning area composite structure in the form of rational functions / A. N. Bormotov, I. A. Proshin, S. V. Tyurdeneva // XXI century: the results of past and present problems plus. - 2013. - № 12 (16). - P. 272-280.
5. Bormotov, A. N. Multicriteria synthesis of superheavy composite / A. N. Bormotov, I. A. Proshin // Herald Bryansk State Technical University. - 2009. - № 4. - P. 29-36.
6. Bormotov, A. N. The method of constructing multivariate non-linear models by the example of mathematical modeling of composites for special purposes / A. N. Bormotov, I. A. Proshin // XXI century: the results of past and present problems plus. - 2013. - № 12 (16). - P. 264-271.
7. Bormotov, A. N. Multicriteria synthesis of superheavy composite / A. N. Bormotov, I. A. Proshin, A. Y. Kirsanov, E. M. Borodin // Bulletin of Voronezh State Technical University. - 2010. - T. 6, №7. - P. 98-104.
8. Chupshev, A. V. Effect of blade diameter and the number of the uneven mix and energy mix / A. V. Chupshev, V. V. Konovalov, V. P. Teryushkov // Herald of the Federal State Institution of Higher Professional Education Moscow State University Agroengineering V.P. Goryachkina. - 2008. - № 2. - Р. 132-133.
9. Konovalov, V. V. Modeling quality bulk material mixing drum mixer / V. V. Konovalov, N. V. Dimitriev, A. A. Kurochkin, G. V. Shaburova // XXI century: the results of the past and the problems of the present, plus. - 2013. - №9, Vol. 1. - Р. 77-85.
10. Konovalov, V. V. Analytical determination of the performance of the screw-conveyor vmesitelya / V. V. Konovalov, A. S. Fomin, V. P. Teryushkov, A. V. Chupshev // Niva Povolzhya. - 2014. - № 1 (30). - Р. 63-70.
11. Novikov, V. V. Determination of the volumetric flow rate of the extrudate in the compression zone of a single-screw extruder press / V. V. Novikov, A. A. Kurochkin, G. V. Shaburova [et al.] // Herald of Altai State Agrarian University. - 2011. - № 1 (75). - P. 91-94.
12. Konovalov, V. V. Optimization of the parameters of the drum mixer / V. V. Konovalov, N. V. Dimitriev, A. V. Chupshev, V. P. Teryushkov // Niva Povolzhya. - 2013. - № 4 (29). - P. 41-47.
13. Konovalov, V. V. Simulation of the process of continuous compounding extruder, mixer-dispenser / V. V. Konovalov, V. V. Novikov, D. N. Aziatkin, A. S. Gretsov // Bulletin of the Samara State Agricultural Academy. - 2013. - № 3. - P. 72-78.
14. Konovalov, V. V. Modeling changes uniform mixture with a stepped mixing / V. V. Konovalov, A. V. Chupshev, M. V. Fomina, A. S. Kaliganov // Niva Povolzhya. - 2013. - № 3 (28). - P. 77-83.
15. Konovalov, V. V. Modeling of the material when unloading vertical mixer / V. V. Konovalov, A. S. Kaliganov, M. V. Fomina, A. V. Chupshev // XXI century: the results of past and present problems plus. - 2014. - № 6 (22). - P. 67-74.
16. Konovalov, V. V. Justification of constructive-regime parameters of the dry feed mixer with flat blades / V. V. Konovalov, V. F. Dmitriev, M. V. Konovalovа // Scientific review. - 2011. - №1. - P. 24-28.
