Journals Monographies Textbooks Collections Authors
Submit manuscript
Home / Journals / Science intensive technologies in mechanical engineering / Rubric SCIENCE INTENSIVE TECHNOLOGIES OFF INISHING AND HARDENING PROCESSING (archived)

Articles of rubric " SCIENCE INTENSIVE TECHNOLOGIES OFF INISHING AND HARDENING PROCESSING (ARCHIVED) " of journal " SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING "

EXPERIMENTAL RESEARCH OF STATIC-IMPULSE DEFORMATIVE DRAWING
POWER ASPECTS OF PARTS STRENGTHENING PROCESSING UNDER ROTATING FIELD CONDITIONS
TECHNOLOGY OF RESIDUAL STRESSES REMOVAL AT MULTI-CYCLE RACERS RUNNING-IN
NEW TECHNOLOGICAL POTENTIALITIES OF FINISH-STRENGTHENING BY SURFACE PLASTIC DEFORMATION
ASSESSMENT OF STRESS-STRAIN STATE IN CYLINDRICAL PARTS AFTER TRANSVERSE RUNNING WITH FLAT PLATES
THE STUDY OF THE PROPERTIES OF STEEL 40X13 COMPLEX OBTAINED BY HEAT TREATMENT– HIGH VACUUM ANNEALING - DIFFUSION SATURATION WITH SILICON
INVESTIGATIONS OF MATERIAL MICRO-HARDNESS CHANGES IN DEPTH OF PRISMATIC SAMPLE AT VIBRO-WAVE LOADING
MODEL OF LONG-LENGTH PART FLATTENING BY MOBILE LOCAL BEND
NEW METHODS FOR SURFACE PLASTIC DEFORMATION OF LOW-RIGIDITY CYLINDRICAL MACHINE PARTS
TECHNOLOGICAL INCREASE OF STATIC LOAD CARRYING CAPACITY OF LOCAL RACEWAYS IN BALL BEARINGS THROUGH BALL ROLLING-OFF
IMPACT OF LOCAL DEFORMATION KINEMATICS UPON STRESSED STATE OF SURFACE LAYER
ANALYSIS OF INHERITANCE MECHANISMS IN ANIMATE NATURE AND ENGINEERING
DEFORMATION FORCE IMPACT AT SURFACE PLASTIC DEFORMATION UPON STRENGTHENING DEPTH OF PART SURFACE LAYER
FINISH-STRENGTHENING TREATMENT WITH SURFACE-PLASTIC DEFORMATION
MORPHOLOGICAL APPROACH TO THE DESCRIPTION OF COMBINED MACHINING BY CUTTING AND SURFACE PLASTIC DEFORMATION WITH ROLLERS OF LONG SHAFTS AND PIPES
TECHNOLOGICAL IMPROVEMENT OF THE DURABILITY OF INTERNAL SCREW SURFACES
INTENSITY INCREASE IN METAL REMOVAL AT VIBRATION TREATMENT BASED ON USE OF “SLOT” EFFECT IN WORKING CHAMBER
ARRANGEMENT CIRCUITS OF SMALL-SIZE OF ROTOR-HELICAL VIBRATION TECHNOLOGICAL SYSTEMS FOR PARTS FINISH-STRENGTHENING
EXPERIMENTAL RESEARCH OF VIBRATION-WAVE PROCESSING OF DIFFERENT MATERIAL SAMPLE PACKAGE AT HETEROGENEOUS ORIENTATION (ALIGNMENT) IN PACKAGE
TECHNOLOGICAL SUPPORT OF CARRYING LAYER PARAMETERS BY DEFORMATION AND COMBINED STRENGTHENING
FORMING MANDREL USE FOR SLOT HOLE CALIBRATION IN HEAT-TREATED PARTS
Science intensive technologies in mechanical engineering
EXPERIMENTAL RESEARCH OF STATIC-IMPULSE DEFORMATIVE DRAWING
Volume, issue
1 № 1 Published
Authors
Solovev D. , Kirichek Andrey , Medvedev M.
DOI
https://doi.org/10.12737/17322
Published
31.01.2016
Science intensive technologies in mechanical engineering
POWER ASPECTS OF PARTS STRENGTHENING PROCESSING UNDER ROTATING FIELD CONDITIONS
Volume, issue
1 № 6 Published
Authors
Kochubey Anatoliy , Lebedev Valeriy , Vernigorov Yuriy , Chumak Irina
DOI
https://doi.org/10.12737/20139
Published
16.06.2016
Science intensive technologies in mechanical engineering
TECHNOLOGY OF RESIDUAL STRESSES REMOVAL AT MULTI-CYCLE RACERS RUNNING-IN
Volume, issue
2017 № 1 (67) Published
Authors
Balaev Andrey , Korolev Albert , Yakovishin Aleksandr
DOI
https://doi.org/10.12737/24208
Published
31.01.2017
Science intensive technologies in mechanical engineering
NEW TECHNOLOGICAL POTENTIALITIES OF FINISH-STRENGTHENING BY SURFACE PLASTIC DEFORMATION
Volume, issue
2017 № 3 (69) Published
Authors
Zaides Semen , Ngo Сao
DOI
https://doi.org/10.12737/24961
Published
31.03.2017
Science intensive technologies in mechanical engineering
ASSESSMENT OF STRESS-STRAIN STATE IN CYLINDRICAL PARTS AFTER TRANSVERSE RUNNING WITH FLAT PLATES
Volume, issue
2017 № 5 (71) Published
Authors
Zaides Semen , Pham Dac
DOI
https://doi.org/10.12737/article_591947e23d0d82.17432094
Published
15.05.2017
Science intensive technologies in mechanical engineering
THE STUDY OF THE PROPERTIES OF STEEL 40X13 COMPLEX OBTAINED BY HEAT TREATMENT– HIGH VACUUM ANNEALING - DIFFUSION SATURATION WITH SILICON
Volume, issue
2018 № 1 (79) Published
Authors
Suslov Anatoliy , Shalygin Mikhail
DOI
https://doi.org/10.12737/article_5a5a44e88cdc22.07121039
Published
14.01.2018
Science intensive technologies in mechanical engineering
INVESTIGATIONS OF MATERIAL MICRO-HARDNESS CHANGES IN DEPTH OF PRISMATIC SAMPLE AT VIBRO-WAVE LOADING
Volume, issue
2018 № 2 (80) Published
Authors
Babichev Anatoly , Vobu Ambageu , Biryukov D. , Grigorenko A. , Shirin A.
DOI
https://doi.org/10.12737/article_5a70c104d3f4f1.45757834
Published
01.02.2018
Science intensive technologies in mechanical engineering
MODEL OF LONG-LENGTH PART FLATTENING BY MOBILE LOCAL BEND
Volume, issue
2018 № 6 (84) Published
Authors
Korolev Albert , Reshetnikov Mihail , Savran Sergey
DOI
https://doi.org/10.30987/article_5b0e411343ba75.86969405
Published
22.06.2018
Science intensive technologies in mechanical engineering
NEW METHODS FOR SURFACE PLASTIC DEFORMATION OF LOW-RIGIDITY CYLINDRICAL MACHINE PARTS
Volume, issue
2018 № 8 (86) Published
Authors
Zaides Semen
DOI
https://doi.org/10.30987/article_5b53640219a6a8.67244170
Published
06.09.2018
Science intensive technologies in mechanical engineering
TECHNOLOGICAL INCREASE OF STATIC LOAD CARRYING CAPACITY OF LOCAL RACEWAYS IN BALL BEARINGS THROUGH BALL ROLLING-OFF
Volume, issue
2018 № 12 (90) Published
Authors
Korolev Albert , Zakharchenko Mihail , Mishchenko Kristina
DOI
https://doi.org/10.30987/article_5bf70416c07a10.01524769
Published
08.12.2018
Science intensive technologies in mechanical engineering
IMPACT OF LOCAL DEFORMATION KINEMATICS UPON STRESSED STATE OF SURFACE LAYER
Volume, issue
2019 № 5 (95) Published
Authors
Zaides Semen , Bobrovsky I. , Fam Van
DOI
https://doi.org/10.30987/article_5ca3030a5bfe86.87759559
Published
19.05.2019
Science intensive technologies in mechanical engineering
ANALYSIS OF INHERITANCE MECHANISMS IN ANIMATE NATURE AND ENGINEERING
Volume, issue
2020 № 11 (113) Published
Authors
Krechetov Andrey , Blyumenstein Valeriy , Zakonnova Ludmila
DOI
https://doi.org/10.30987/2223-4608-2020-11-16-29
Published
30.11.2020
Science intensive technologies in mechanical engineering
DEFORMATION FORCE IMPACT AT SURFACE PLASTIC DEFORMATION UPON STRENGTHENING DEPTH OF PART SURFACE LAYER
Volume, issue
2021 № 1 (115) Published
Authors
Virt Andrey
DOI
https://doi.org/10.30987/2223-4608-2020-2021-1-44-48
Published
30.01.2021
Science intensive technologies in mechanical engineering
FINISH-STRENGTHENING TREATMENT WITH SURFACE-PLASTIC DEFORMATION
Volume, issue
2021 № 4 (118) Published
Authors
Gurov Roman , Shcherbakov Andrey
DOI
https://doi.org/10.30987/2223-4608-2021-4-3-9
Published
03.02.2022
Science intensive technologies in mechanical engineering
MORPHOLOGICAL APPROACH TO THE DESCRIPTION OF COMBINED MACHINING BY CUTTING AND SURFACE PLASTIC DEFORMATION WITH ROLLERS OF LONG SHAFTS AND PIPES
Volume, issue
2021 № 9 (123) Published
Authors
Nikiforov Nikolay
DOI
https://doi.org/10.30987/2223-4608-2021-9-11-18
Published
04.10.2021
Science intensive technologies in mechanical engineering
TECHNOLOGICAL IMPROVEMENT OF THE DURABILITY OF INTERNAL SCREW SURFACES
Volume, issue
2021 № 9 (123) Published
Authors
Cukanov Ivan
DOI
https://doi.org/10.30987/2223-4608-2021-9-19-25
Published
04.10.2021
Science intensive technologies in mechanical engineering
INTENSITY INCREASE IN METAL REMOVAL AT VIBRATION TREATMENT BASED ON USE OF “SLOT” EFFECT IN WORKING CHAMBER
Volume, issue
2017 № 9 (75) Published
Authors
Babichev Anatoly , Pastukhov Philip , Vobu Ambogemu , Veissa Gureta
DOI
https://doi.org/10.12737/article_59ae90c6700ce5.15497553
Published
05.09.2017
Science intensive technologies in mechanical engineering
ARRANGEMENT CIRCUITS OF SMALL-SIZE OF ROTOR-HELICAL VIBRATION TECHNOLOGICAL SYSTEMS FOR PARTS FINISH-STRENGTHENING
Volume, issue
2017 № 10 (76) Published
Authors
Lebedev Valeriy , Serga Georgy , Chaava Mihail , Demin Georgy
DOI
https://doi.org/10.12737/article_59d496ec40df54.66288140
Published
04.10.2017
Science intensive technologies in mechanical engineering
EXPERIMENTAL RESEARCH OF VIBRATION-WAVE PROCESSING OF DIFFERENT MATERIAL SAMPLE PACKAGE AT HETEROGENEOUS ORIENTATION (ALIGNMENT) IN PACKAGE
Volume, issue
2017 № 11 (77) Published
Authors
Babichev Anatoly , Motrenko Petr , Lisitsky Leonid , Shirin Andrey , Yerina Tatyana , Seminichenko Kristina
DOI
https://doi.org/10.12737/article_59f074a7007941.23415364
Published
25.10.2017
Science intensive technologies in mechanical engineering
TECHNOLOGICAL SUPPORT OF CARRYING LAYER PARAMETERS BY DEFORMATION AND COMBINED STRENGTHENING
Volume, issue
2018 № 10 (88) Published
Authors
Kirichek Andrey
DOI
https://doi.org/10.30987/article_5bb4b1fba80963.30794778
Published
17.10.2018
Science intensive technologies in mechanical engineering
FORMING MANDREL USE FOR SLOT HOLE CALIBRATION IN HEAT-TREATED PARTS
Volume, issue
2017 № 9 (75) Published
Authors
Berberov Sergey , Lebedev Valeriy
DOI
https://doi.org/10.12737/article_59ae90c5c1ad81.23976520
Published
05.09.2017
© INFRA-M
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?