Rostov-na-Donu, Rostov-on-Don, Russian Federation
Rostov-na-Donu, Rostov-on-Don, Russian Federation
Rostov-na-Donu, Rostov-on-Don, Russian Federation
Rostov-na-Donu, Rostov-on-Don, Russian Federation
The results of the investigations on metal removal intensity increase during the vibration treatment on the basis of the “slot” effect use in a working chamber are presented. The investigation results presented show that with the decrease of a section dimension in the working chamber metal removal increases and surface roughness is getting better.
working chamber, vibration treatment, vibration treatment intensity, metal removal; surface roughness
1. Babichev, A.P., Babichev, I.A. Fundamentals of Vibration Techniques; 2-d ed.revised and supplemented - Rostov-upon-Don: Publishing House of DSTU, 2008. - pp. 157-166.
2. Babichev, A.P., Motrenko, P.D., Gillespy, L.K. et al. Vibration Techniques Use in Parts Refinement and Finishing (refinement, washing, removal of burr and barbs, edges treatment); under the editorship of A.P. Babichev, D. Eng., Prof. Rostov-upon-Don: Publishing House of DSTU, 2010, - pp.33.
3. Babichev, A.P. Vibration Techniques Use for Quality Increase of Surface and Parts Operating Properties // Babichev A.P., Motrenko P.D. et al. - Rostov-upon-Don: Publishing House of DSTU, 2006. - pp. 215.
4. Babichev, A.P. Instrumental Support of Parts Machining in Granulated Media: monograph / Babichev A.P., Motrenko P.D., Kostenkov S.A., Rozhnenko O.A. - Rostov-upon-Don: Publishing House of DSTU, 2011. - pp. 267.
5. Tamarkin, M.A. Technological parameters optimization of vibration treatment process // Parts Finishing-Strengthening Improvement: Inter-college Proceedings / RIAM. - Rostov-upon-Don, 1986. - pp. 24 - 28.
