employee
Bryansk, Bryansk, Russian Federation
The new method of deformative strengthening of holes using combined static and impulse loading is presented. Partial replacement of static load, used in classical burnishing, by impact impulses allows decreasing energy intensity of strengthening process and expanding the technological capabilities of the method. The method allows strengthening of small diameter and long length holes. The high depth and degree of strengthening can be obtained; the surface roughness can be decreased. The experimental complex for research of static-impulse parameters of deformative drawing of holes of machine parts, which allows determining the influence of energy parameters of the process taking into account stiffness of technological system on roughness, depth and degree of strengthening of holes surfaces, is developed.
strengthening, plastic deformation, stiffness, static force, impact energy, surface layer, strengtheningdepth, burnishing.
1. Kirichek A.V., Solov’yov D.L. Static-impulse processing of internal cylindrical surfaces. Effective technologies of burnishing, drawing and deformative-cutting processing.Mos-cow, Spektr. 2011. Pp. 299-303.
2. Proskuryakov Yu.G. Technology of strengthening-calibrating and shape forming processing of metals. Moscow, Mashinostrojenie. 1971, 208 p.
3. Static-impulse processing of internal cylindrical surfaces. A.V. Kirichek, A.G. Lazutkin., D.L. Solov’yov, S.A. Silant’yev. Izvestiya OryolGTU. Mashinostrojenie.Priborostrojenie. 2004. No.3. Pp. 16-17.
4. Kirichek A.V., Solov’yov D.L., Polyakov A.V. Streng-thening of holesbystatic-impulseburnishing. Strengthening technologies and coatings.2009. No. 6.Pp.14-16.
5. Solov’yov D.L., Kirichek A.V., Medvedev M.N. Capabilities of improvement of durability of caterpillar tracks by deformative strengthening. Fundamental and andapplied problems of technics and technology. 2011. No.2(286). Pp. 89-92.
6. Research of energy parameters of deformative strengthening process of holes by static-impulse processing. A.V. Kirichek, D.L. Solov’yov, S.A. Silant’yev, M.N. Medvedev. Mechani-cal engineering - a base of Russian technological development.Proceedings of V International scientific technical conference.Southwest State University, Kursk, 2013. Pp. 543-547.
7. Kirichek A.V., Solov’yov D.L., Medvedev M.N. Defor-mative strengthening by impact waves of internal cylindrical surfaces. Wave, vibrowave technologies in mechanical engi-neering, metalwork and other fields.Proceedings of international scientific symposium of technologists and mechanical engineers.Rostov-na-Donu, DGTU, 2014. Pp. 18-22
