Journals Monographies Textbooks Collections Authors
Submit manuscript
Home / Journals / Automation and modeling in design and management / Rubric Automation and control of technological processes and production, automated design systems

Articles of rubric " AUTOMATION AND CONTROL OF TECHNOLOGICAL PROCESSES AND PRODUCTION, AUTOMATED DESIGN SYSTEMS " of journal " AUTOMATION AND MODELING IN DESIGN AND MANAGEMENT "

ANALYSIS AND SYNTHESIS OF ORGANIZATIONAL-TECHNICAL SOLUTIONS IN ADDITIVE MANUFACTURING
AUTOMATION OF MACHINING OF THREADED HOLES OF ULTRA-SMALL DIAMETERS
AUTOMATION OF STRUCTURAL AND PARAMETRIC ANALYSIS OF PROJECT DECISIONS AND TRAINING OF THE DESIGNER OF MACHINE-BUILDING PRODUCTS WITH CAD COMPASS
THE CONTROL ALGORITHM FOR CONCENTRATION OF THE TARGET PRODUCT IN THE CHEMICAL REACTOR
TEMPERATURE MODE MANAGEMENT OF CHEMICAL REACTOR
AUTOMATION OF FORECASTING DEVELOPMENT PROCESSES OF COMPLEX TECHNICAL SYSTEMS
METHODOLOGY OF PHASED ORGANIZATION FOR DIGITAL PRODUCTION TO ENSURE THE QUALITY OF ELECTRONICS USING THE CONCEPT OF DFM
INTRODUCTION OF NEW METHODS OF DIGITALIZITION OF HARDWARE AND SOFTWARE SYSTEMS IN ADDITIVE PRODUCTION
THE PRINCIPLES OF NECESSITY AND SUFFICIENCY TO SYSTEMATIZE SOFTWARE
AUTOMATED SYSTEM FOR ESTIMATION-EFFICIENCYSOFTWARE MEANS OF IN-FORMATION PROTECTION
DEVELOPMENT OF SYSTEM FOR AUTOMATION OF PROCESS OF DESIGNING OF WATER TREATMENT SYSTEMS FOR SWIMMING POOLS
PLANNING OF MEASURING EQUIPMENT TOGETHER WITH A MACHINE-TOOL FLEET WITH THE HELP OF MES-SYSTEM
NONLINEAR CASCADE CONTROL SYSTEM OF CHEMICAL REACTOR THERMAL REGIME
ANALYTICAL SOLUTION OF THE EQUATION OF CONDUCTIVITY FOR VARIOUS BOUNDARY CONDITIONS
OBJECT RECOGNITION OF ROAD INFRASTRUCTURE USING A FULLY CONVOLUTIONAL NEURAL NETWORK
VR / AR TECHNOLOGIES AND THEIR APPLICATION IN MECHANICAL ENGINEERING
MODELING THE CAR MOTION IN A TRANSPORT FLOW ON A COMPUTER
ASSESSMENT OF PERSONNEL ACTIONS IN THE MOST DANGEROUS ACCIDENTS.DEVELOPMENT OF A NPP SAFETY MONITORING PROGRAM
DEVELOPMENT OF THE MONITORING (CONTROL) PROGRAM OF THE SAFETY OF NUCLEAR POWER PLANTS
URBAN MOVEMENT ROUTES ESTIMATION FOR OPTIMAL URBAN DRIVING
DESIGN FEATURES OF THE AUTOMATIZED MANAGEMENT SYSTEM DEVELOPMENT FOR A TOURIST AND RECREATIONAL COMPLEX
ARCHITECTURE OF THE REPAIR AND MAINTENANCE MANAGEMENT SOFTWARE FOR A SERVICE ENTERPRISE
COMPUTER MODELING OF THE STRUCTURE OF FOREST DRYING CHAMBERS, REDUCING HEAT LOSS
DEVELOPING THE ALGORITHM OF AN AUTOMATED EXPERT SELECTION SYSTEM FOR CONDUCTING CORRECTION MEASURES TO IMPROVE THE DRILLING JIG PERFORMANCE
ALGORITHMIC SUPPORT OF THE AUTOMATED INSTALLATION FOR MEASURING THE MATING AND UNMATING FORCE OF ELECTRIC CONNECTOR CONTACTS
AUTOMATING THE PROCESS OF HEALTH CARE INSTITUTION ACTIVITIES IN THE FIELD OF THE THYROID GLAND ULTRASOUND EXAMINATION
INCREASING INDUSTRIAL EFFICIENCY BASED ON DEVELOPING AN AUTOMATED PRODUCTION PLANNING SYSTEM
MODELING AND AUTOMATING AN ASSISTANT CONSULTANT FOR THE “MAGNIT” CHAIN OF STORES
POWER EQUIOMENT CONTROL SYSTEM OF A SHUNTING LOCOMOTIVE WITH AUTOMATIC SPEED CONTROL ALGORITHM
SOFTWARE-DEFINED RADAR TARGET SIMULATOR WITH DRFM FOR AUTOMATED RADARS TESTING
DEVELOPING AND APPLYING NEURAL NETWORK MODELS IN AUTOMATING EQUIPMENT CONTROL AND TECHNOLOGICAL PROCESSES
CONTROLLING THE MOVEMENT AXIS OF THE OPERATING DEVICES OF THE FACILITIES AND IMPLEMENTATION OPTIONS
MODEL AND ALGORITHM FOR CONTROLLING THE ASSEMBLY EQUIPMENT OF MECHANICAL ASSEMBLY SUPPLY SYSTEM
STUDYING THE ACCURACY OF DETERMINING THE LOCATION OF RADIO EMISSION SOURCES WITH COMPLEX SIGNALS WHEN USING A MATRIX RECEIVER WITH AN AUTOCORRELATION ALGORITHM AT THE OUTPUT
CONTROLLING A COMPUTER NODE USING PROJECTOR-LESS STOCHASTIC APPROXIMATION ALGORITHMS FOR UNAUTHORIZED INPUT FLOW MODIFICATIONS
ANALYSING INFORMATION LEAK CONTROL SUBSYSTEM OF A PROTECTED AUTOMATED SYSTEM
APPLYING RANDOMIZED ENCRYPTION ALGORITHMS IN AN INDUSTRIAL ENTERPRISE AUTOMATED SYSTEM FOR INFORMATION RESOURCE PROTECTION
ONCE AGAIN ABOUT DETERMINING THE STATE OF A LARGE-SIZED BODY OF ROTATION
ANALYSING NON-LINEARITY PARAMETERS AND PHASE RELATIONSHIP OF TELECOM-MUNICATION NETWORK ANALOG-OUTPUT TERMINATIONS
ASSESSING THE QUALITI INDICATORS OF AUTOMATED CONTROL SYSTEM FACILITIES
FORMING SYNTHETIC DATA FOR TRAINING A COMPUTER VISION SYSTEM
DISTORTION IDENTIFICATION OF THE CYLINDRICAL PART FORM OF TECHNOLOGICAL UNITS
DIAGNOSIS AUTOMATION METHODS IN THE SUBJECT AREA
AUTOMATING THE STAND OF THE LEVEL AND TEMPERATURE CONTROL SYSTEM OF THE TANK FARMS
METHODS AND TOOLS FOR AUTOMATED DETECTION OF A SECURITY VIOLATOR AT THE TRANSPORT INFRASTRUCTURE FACILITY (BY THE EXAMPLE OF A SEAPORT)
TECHNOLOGICAL PROCESS AUTOMATION OF BALANCING QUARTZ RESONATORS OF SOLID STATE WAVE GYROSCOPES
APPLYING AUTOMATIC PROGRAMMING TECHNOLOGY FOR DEVELOPING A WAREHOUSE MANAGEMENT PROGRAMME AT ENTERPRISES
DEVELOPING A SOFTWARE MODULE FOR THE SEMANTIC ANALYSIS OF THE PATENT ARRAY
USING AUTOMATED AUTHORSHIP EXPERTISE IN THE SYSTEMS OF INTELLECTUAL RESOURCE PROTECTION OF AN INDUSTRIAL ENTERPRISE
USING AUTOMATIC PROGRAMMING TECHNOLOGY IN THE APPLICATION DEVELOPMENT FOR PROGRAMMING WITH TOOLS
DESIGNING AN AUXILIARY AUTOMATED MANAGEMENT DECISION MAKING SYSTEM BASED ON INFORMATION SECURITY LEVEL ANALYSIS
DEVELOPING AN ALGORITHM FOR OPERATING THE HARDWARE MODULE OF THE AUTOMATION SYSTEM FOR DEPARTMENTAL PETROL STATIONS
ON THE PREPARATORY OPERATION OF ROBOTIC WELDING OF A KNUCKLED BRANCH
APPLYING AUTOMATA-BASED PROGRAMMING TECHNOLOGY TO DEVELOP AN AUTOMATIC CONTROL SYSTEM OF A CHECKPOINT FOR PEOPLE AND VEHICLES WITH ONE ENTRY AND ONE EXIT
AUTOMATIC CONTROL SYSTEM FOR SECOND-ORDER TECHNOLOGICAL PROCESS WITH TIME DELAY BASED ON STATE FEEDBACK CONTROLLER
AUTOMATING INFORMATION SECURITY PROCESSES BY DEVELOPING A RISK MINIMIZATION MODEL FOR A DESIGN AND TECHNOLOGICAL PROJECT
ANALYSING THE EFFECTIVENESS OF THE COMPUTER-AIDED DESIGN OF HYDRAULIC STATIONS
MATHEMATICAL MODEL OF THE MAIN PIPELINE TECHNOLOGICAL SECTION WITH THROTTLING CONTROL
Automation and modeling in design and management
ANALYSIS AND SYNTHESIS OF ORGANIZATIONAL-TECHNICAL SOLUTIONS IN ADDITIVE MANUFACTURING
Volume, issue
2018 № 1 (1) Published
Authors
Semenova Elena , Chabanenko Alexander
DOI
https://doi.org/10.30987/article_5bfd98c62bf624.44338948
Published
30.09.2018
Automation and modeling in design and management
AUTOMATION OF MACHINING OF THREADED HOLES OF ULTRA-SMALL DIAMETERS
Volume, issue
2018 № 1 (1) Published
Authors
Yagodkin Maksim
DOI
https://doi.org/10.30987/article_5bfd98c80e6bd7.41659987
Published
30.09.2018
Automation and modeling in design and management
AUTOMATION OF STRUCTURAL AND PARAMETRIC ANALYSIS OF PROJECT DECISIONS AND TRAINING OF THE DESIGNER OF MACHINE-BUILDING PRODUCTS WITH CAD COMPASS
Volume, issue
2018 № 2 (2) Published
Authors
Afanasyev Afanasyev , Brigadnov Sergey
DOI
https://doi.org/10.30987/article_5c387d61c4ead8.61787791
Published
31.12.2018
Automation and modeling in design and management
THE CONTROL ALGORITHM FOR CONCENTRATION OF THE TARGET PRODUCT IN THE CHEMICAL REACTOR
Volume, issue
2018 № 2 (2) Published
Authors
Labutin Aleksandr , Nevinitsyn Vladimir , Volkova Galina , Sal'kov Vladislav
DOI
https://doi.org/10.30987/article_5c387d62698a75.92047422
Published
31.12.2018
Automation and modeling in design and management
TEMPERATURE MODE MANAGEMENT OF CHEMICAL REACTOR
Volume, issue
2018 № 2 (2) Published
Authors
Nevinitsyn Vladimir , Labutin Aleksandr , Volkova Galina
DOI
https://doi.org/10.30987/article_5c387d62f2a733.72337613
Published
31.12.2018
Automation and modeling in design and management
AUTOMATION OF FORECASTING DEVELOPMENT PROCESSES OF COMPLEX TECHNICAL SYSTEMS
Volume, issue
2019 № 1 (3) Published
Authors
Nazarevich Stanislav
DOI
https://doi.org/10.30987/article_5c9b8b2ce50d52.90279629
Published
29.03.2019
Automation and modeling in design and management
METHODOLOGY OF PHASED ORGANIZATION FOR DIGITAL PRODUCTION TO ENSURE THE QUALITY OF ELECTRONICS USING THE CONCEPT OF DFM
Volume, issue
2019 № 1 (3) Published
Authors
Petrushevskaya Anastasia
DOI
https://doi.org/10.30987/article_5c9b8b2d580145.79340136
Published
29.03.2019
Automation and modeling in design and management
INTRODUCTION OF NEW METHODS OF DIGITALIZITION OF HARDWARE AND SOFTWARE SYSTEMS IN ADDITIVE PRODUCTION
Volume, issue
2019 № 1 (3) Published
Authors
Semenova Elena , Makhrov Nikolay , Borisov Stanislav
DOI
https://doi.org/10.30987/article_5c9b8b2dc7e218.14508954
Published
29.03.2019
Automation and modeling in design and management
THE PRINCIPLES OF NECESSITY AND SUFFICIENCY TO SYSTEMATIZE SOFTWARE
Volume, issue
2019 № 2 (4) Published
Authors
Arshinskiy Vadim , Arshinskiy Leonid , Bakhvalov Sergey
DOI
https://doi.org/10.30987/article_5cf2d1f855d980.40342469
Published
23.06.2019
Automation and modeling in design and management
AUTOMATED SYSTEM FOR ESTIMATION-EFFICIENCYSOFTWARE MEANS OF IN-FORMATION PROTECTION
Volume, issue
2019 № 2 (4) Published
Authors
Gorlov Aleksey , Rytov Mikhail , Lysov Dmitriy Andreevich
DOI
https://doi.org/10.30987/article_5cf2d22c9dcd72.20436206
Published
23.06.2019
Automation and modeling in design and management
DEVELOPMENT OF SYSTEM FOR AUTOMATION OF PROCESS OF DESIGNING OF WATER TREATMENT SYSTEMS FOR SWIMMING POOLS
Volume, issue
2019 № 2 (4) Published
Authors
Ignatiev Sergey , Averchenkov Andrey
DOI
https://doi.org/10.30987/article_5cf2d29cd1f178.93000301
Published
23.06.2019
Automation and modeling in design and management
PLANNING OF MEASURING EQUIPMENT TOGETHER WITH A MACHINE-TOOL FLEET WITH THE HELP OF MES-SYSTEM
Volume, issue
2019 № 2 (4) Published
Authors
Feofanov Aleksandr , Shutikov Mikhail
DOI
https://doi.org/10.30987/article_5cf2d32c0f5a12.75882726
Published
23.06.2019
Automation and modeling in design and management
NONLINEAR CASCADE CONTROL SYSTEM OF CHEMICAL REACTOR THERMAL REGIME
Volume, issue
2019 № 3 (5) Published
Authors
Labutin Aleksandr , Nevinitsyn Vladimir , Volkova Galina , Panasenkova Anastasiya
DOI
https://doi.org/10.30987/article_5d8d113e130732.69448232
Published
30.09.2019
Automation and modeling in design and management
ANALYTICAL SOLUTION OF THE EQUATION OF CONDUCTIVITY FOR VARIOUS BOUNDARY CONDITIONS
Volume, issue
2019 № 4 (6) Published
Authors
Krys'ko Vadim , Saltykova Olga , Tebyakin Alexey
DOI
https://doi.org/10.30987/2658-3488-2019-2019-4-33-37
Published
15.12.2019
Automation and modeling in design and management
OBJECT RECOGNITION OF ROAD INFRASTRUCTURE USING A FULLY CONVOLUTIONAL NEURAL NETWORK
Volume, issue
2019 № 4 (6) Published
Authors
Azarchenkov Andrey , Lyubimov Maxim , Lushkov Vladislav
DOI
https://doi.org/10.30987/2658-3488-2019-2019-4-38-43
Published
15.12.2019
Automation and modeling in design and management
VR / AR TECHNOLOGIES AND THEIR APPLICATION IN MECHANICAL ENGINEERING
Volume, issue
2019 № 4 (6) Published
Authors
Feofanov Aleksandr , Okhmat Andrey , Berdyugin Anton
DOI
https://doi.org/10.30987/2658-3488-2019-2019-4-44-48
Published
15.12.2019
Automation and modeling in design and management
MODELING THE CAR MOTION IN A TRANSPORT FLOW ON A COMPUTER
Volume, issue
2020 № 1 (7) Published
Authors
Arhangel'skiy Anatoliy
DOI
https://doi.org/10.30987/2658-6436-2020-1-26-31
Published
22.03.2020
Automation and modeling in design and management
ASSESSMENT OF PERSONNEL ACTIONS IN THE MOST DANGEROUS ACCIDENTS.DEVELOPMENT OF A NPP SAFETY MONITORING PROGRAM
Volume, issue
2020 № 2 (8) Published
Authors
Berberova Maria , Chuenko Vladislav , Zolotarev Oleg , Andreev Vyacheslav , Karpushin Egor , D'yachkov Dmitriy , Suvorov Andrey , Fedoseeva Alena , Fiksakov Grigoriy
DOI
https://doi.org/10.30987/2658-6436-2020-2-42-49
Published
23.06.2020
Automation and modeling in design and management
DEVELOPMENT OF THE MONITORING (CONTROL) PROGRAM OF THE SAFETY OF NUCLEAR POWER PLANTS
Volume, issue
2020 № 2 (8) Published
Authors
Berberova Maria , Chuenko Vladislav , Zolotarev Oleg , Trefilova Olga , Grudev Maksim , Anichkin Vasilii , Razina Elena
DOI
https://doi.org/10.30987/2658-6436-2020-2-50-56
Published
23.06.2020
Automation and modeling in design and management
URBAN MOVEMENT ROUTES ESTIMATION FOR OPTIMAL URBAN DRIVING
Volume, issue
2020 № 3 (9) Published
Authors
Azarchenkov Andrey , Marchenkov Nikolai
DOI
https://doi.org/10.30987/2658-6436-2020-3-56-64
Published
19.09.2020
Automation and modeling in design and management
DESIGN FEATURES OF THE AUTOMATIZED MANAGEMENT SYSTEM DEVELOPMENT FOR A TOURIST AND RECREATIONAL COMPLEX
Volume, issue
2020 № 4 (10) Published
Authors
Beleychenko Aleksey , Averchenkov Vladimir
DOI
https://doi.org/10.30987/2658-6436-2020-4-40-52
Published
31.12.2020
Automation and modeling in design and management
ARCHITECTURE OF THE REPAIR AND MAINTENANCE MANAGEMENT SOFTWARE FOR A SERVICE ENTERPRISE
Volume, issue
2020 № 4 (10) Published
Authors
Titarev Dmitriy , Serikov Andrey , Krivtsanov Sergei
DOI
https://doi.org/10.30987/2658-6436-2020-4-53-59
Published
31.12.2020
Automation and modeling in design and management
COMPUTER MODELING OF THE STRUCTURE OF FOREST DRYING CHAMBERS, REDUCING HEAT LOSS
Volume, issue
2020 № 4 (10) Published
Authors
Pruss Boris , Romanov Viktor , Prozorov Yaroslav , Pleskacheva Olga
DOI
https://doi.org/10.30987/2658-6436-2020-4-60-67
Published
31.12.2020
Automation and modeling in design and management
DEVELOPING THE ALGORITHM OF AN AUTOMATED EXPERT SELECTION SYSTEM FOR CONDUCTING CORRECTION MEASURES TO IMPROVE THE DRILLING JIG PERFORMANCE
Volume, issue
2021 № 1 (11) Published
Authors
Feofanov Aleksandr , Busheva Anna
DOI
https://doi.org/10.30987/2658-6436-2021-1-52-60
Published
30.03.2021
Automation and modeling in design and management
ALGORITHMIC SUPPORT OF THE AUTOMATED INSTALLATION FOR MEASURING THE MATING AND UNMATING FORCE OF ELECTRIC CONNECTOR CONTACTS
Volume, issue
2021 № 1 (11) Published
Authors
Akulov Pavel , Syrykh Andrew , Petreshin Dmitriy
DOI
https://doi.org/10.30987/2658-6436-2021-1-61-70
Published
30.03.2021
Automation and modeling in design and management
AUTOMATING THE PROCESS OF HEALTH CARE INSTITUTION ACTIVITIES IN THE FIELD OF THE THYROID GLAND ULTRASOUND EXAMINATION
Volume, issue
2021 № 2 (12) Published
Authors
Vdovichenko Oleg , Averchenkov Andrey
DOI
https://doi.org/10.30987/2658-6436-2021-2-41-48
Published
30.06.2021
Automation and modeling in design and management
INCREASING INDUSTRIAL EFFICIENCY BASED ON DEVELOPING AN AUTOMATED PRODUCTION PLANNING SYSTEM
Volume, issue
2021 № 2 (12) Published
Authors
Terehov Maksim , Zaikin Vladislav , Averchenkov Andrey
DOI
https://doi.org/10.30987/2658-6436-2021-2-49-57
Published
30.06.2021
Automation and modeling in design and management
MODELING AND AUTOMATING AN ASSISTANT CONSULTANT FOR THE “MAGNIT” CHAIN OF STORES
Volume, issue
2021 № 2 (12) Published
Authors
Tischenko Anastasiya , Kazakov Yuriy
DOI
https://doi.org/10.30987/2658-6436-2021-2-58-62
Published
30.06.2021
Automation and modeling in design and management
POWER EQUIOMENT CONTROL SYSTEM OF A SHUNTING LOCOMOTIVE WITH AUTOMATIC SPEED CONTROL ALGORITHM
Volume, issue
2021 № 3-4 (14) Published
Authors
Zhuravlev Sergey
DOI
https://doi.org/10.30987/2658-6436-2021-3-4-31-38
Published
30.12.2021
Automation and modeling in design and management
SOFTWARE-DEFINED RADAR TARGET SIMULATOR WITH DRFM FOR AUTOMATED RADARS TESTING
Volume, issue
2021 № 3-4 (14) Published
Authors
Smolyakov Andrey , Podstrigaev Alexey
DOI
https://doi.org/10.30987/2658-6436-2021-3-4-39-48
Published
30.12.2021
Automation and modeling in design and management
DEVELOPING AND APPLYING NEURAL NETWORK MODELS IN AUTOMATING EQUIPMENT CONTROL AND TECHNOLOGICAL PROCESSES
Volume, issue
2022 № 1 (15) Published
Authors
Sukhanova Nataliya
DOI
https://doi.org/10.30987/2658-6436-2022-1-24-32
Published
30.03.2022
Automation and modeling in design and management
CONTROLLING THE MOVEMENT AXIS OF THE OPERATING DEVICES OF THE FACILITIES AND IMPLEMENTATION OPTIONS
Volume, issue
2022 № 1 (15) Published
Authors
Chepchurov Mihail , Minasova Viktoriya
DOI
https://doi.org/10.30987/2658-6436-2022-1-33-42
Published
30.03.2022
Automation and modeling in design and management
MODEL AND ALGORITHM FOR CONTROLLING THE ASSEMBLY EQUIPMENT OF MECHANICAL ASSEMBLY SUPPLY SYSTEM
Volume, issue
2022 № 1 (15) Published
Authors
Shabanov Alexey , Averchenkova Elena , Averchenkov Vladimir
DOI
https://doi.org/10.30987/2658-6436-2022-1-43-55
Published
30.03.2022
Automation and modeling in design and management
STUDYING THE ACCURACY OF DETERMINING THE LOCATION OF RADIO EMISSION SOURCES WITH COMPLEX SIGNALS WHEN USING A MATRIX RECEIVER WITH AN AUTOCORRELATION ALGORITHM AT THE OUTPUT
Volume, issue
2022 № 2 (16) Published
Authors
Podstrigaev Alexey , Nguen Chong Nhan
DOI
https://doi.org/10.30987/2658-6436-2022-2-4-12
Published
30.06.2022
Automation and modeling in design and management
CONTROLLING A COMPUTER NODE USING PROJECTOR-LESS STOCHASTIC APPROXIMATION ALGORITHMS FOR UNAUTHORIZED INPUT FLOW MODIFICATIONS
Volume, issue
2022 № 2 (16) Published
Authors
Tkachenko Kirill
DOI
https://doi.org/10.30987/2658-6436-2022-2-13-17
Published
30.06.2022
Automation and modeling in design and management
ANALYSING INFORMATION LEAK CONTROL SUBSYSTEM OF A PROTECTED AUTOMATED SYSTEM
Volume, issue
2022 № 3 (17) Published
Authors
Bugorsky Andreevich Mikhail
DOI
https://doi.org/10.30987/2658-6436-2022-3-4-9
Published
30.09.2022
Automation and modeling in design and management
APPLYING RANDOMIZED ENCRYPTION ALGORITHMS IN AN INDUSTRIAL ENTERPRISE AUTOMATED SYSTEM FOR INFORMATION RESOURCE PROTECTION
Volume, issue
2022 № 3 (17) Published
Authors
Kuznetsova Natalia , Karlova Tatyana , Zapol'skaya Anna
DOI
https://doi.org/10.30987/2658-6436-2022-3-10-15
Published
30.09.2022
Automation and modeling in design and management
ONCE AGAIN ABOUT DETERMINING THE STATE OF A LARGE-SIZED BODY OF ROTATION
Volume, issue
2022 № 3 (17) Published
Authors
Chepchurov Mihail , Sumskoy Alexander , Minasova Viktoriya
DOI
https://doi.org/10.30987/2658-6436-2022-3-16-23
Published
30.09.2022
Automation and modeling in design and management
ANALYSING NON-LINEARITY PARAMETERS AND PHASE RELATIONSHIP OF TELECOM-MUNICATION NETWORK ANALOG-OUTPUT TERMINATIONS
Volume, issue
2022 № 4 (18) Published
Authors
Batenkov Kirill
DOI
https://doi.org/10.30987/2658-6436-2022-4-4-11
Published
30.12.2022
Automation and modeling in design and management
ASSESSING THE QUALITI INDICATORS OF AUTOMATED CONTROL SYSTEM FACILITIES
Volume, issue
2022 № 4 (18) Published
Authors
Gubernatorov Oleg
DOI
https://doi.org/10.30987/2658-6436-2022-4-12-17
Published
30.12.2022
Automation and modeling in design and management
FORMING SYNTHETIC DATA FOR TRAINING A COMPUTER VISION SYSTEM
Volume, issue
2022 № 4 (18) Published
Authors
Kopylov Denis , Ageshin Yegor , Khomutskaya Olga
DOI
https://doi.org/10.30987/2658-6436-2022-4-18-28
Published
30.12.2022
Automation and modeling in design and management
DISTORTION IDENTIFICATION OF THE CYLINDRICAL PART FORM OF TECHNOLOGICAL UNITS
Volume, issue
2022 № 4 (18) Published
Authors
Chepchurov Mihail , Sumskoy Alexander , Zhigulina Julia , Podpryatov Denis
DOI
https://doi.org/10.30987/2658-6436-2022-4-29-36
Published
30.12.2022
Automation and modeling in design and management
DIAGNOSIS AUTOMATION METHODS IN THE SUBJECT AREA
Volume, issue
2022 № 4 (18) Published
Authors
Chirkov Andrey Vladimirovich , Gagarina Larisa Gennad'evna , Mironov Nikolay Sergeevich , Lipovy Roman
DOI
https://doi.org/10.30987/2658-6436-2022-4-37-45
Published
30.12.2022
Automation and modeling in design and management
AUTOMATING THE STAND OF THE LEVEL AND TEMPERATURE CONTROL SYSTEM OF THE TANK FARMS
Volume, issue
2023 № 1 (19) Published
Authors
Matlakhov Vitaliy , Khandozhko Viktor , Ageenko Aleksey
DOI
https://doi.org/10.30987/2658-6436-2023-1-4-11
Published
31.03.2023
Automation and modeling in design and management
METHODS AND TOOLS FOR AUTOMATED DETECTION OF A SECURITY VIOLATOR AT THE TRANSPORT INFRASTRUCTURE FACILITY (BY THE EXAMPLE OF A SEAPORT)
Volume, issue
2023 № 1 (19) Published
Authors
Sokolov Sergey Sergeevich , Gubernatorov Oleg , Knysh Tatyana
DOI
https://doi.org/10.30987/2658-6436-2023-1-12-20
Published
31.03.2023
Automation and modeling in design and management
TECHNOLOGICAL PROCESS AUTOMATION OF BALANCING QUARTZ RESONATORS OF SOLID STATE WAVE GYROSCOPES
Volume, issue
2023 № 1 (19) Published
Authors
Spiridonov Fedor , Mingazov Ramis , Shishakov Konstantin
DOI
https://doi.org/10.30987/2658-6436-2023-1-21-31
Published
31.03.2023
Automation and modeling in design and management
APPLYING AUTOMATIC PROGRAMMING TECHNOLOGY FOR DEVELOPING A WAREHOUSE MANAGEMENT PROGRAMME AT ENTERPRISES
Volume, issue
2023 № 2 (20) Published
Authors
Gumunyuk Pavel , Shurpo Alexandr
DOI
https://doi.org/10.30987/2658-6436-2023-2-4-13
Published
30.06.2023
Automation and modeling in design and management
DEVELOPING A SOFTWARE MODULE FOR THE SEMANTIC ANALYSIS OF THE PATENT ARRAY
Volume, issue
2023 № 2 (20) Published
Authors
Korobkin Dmitriy Mihaylovich , Manukyan Arsen , Fomenkov Sergey Alekseevich , Kozina Svetlana
DOI
https://doi.org/10.30987/2658-6436-2023-2-14-22
Published
30.06.2023
Automation and modeling in design and management
USING AUTOMATED AUTHORSHIP EXPERTISE IN THE SYSTEMS OF INTELLECTUAL RESOURCE PROTECTION OF AN INDUSTRIAL ENTERPRISE
Volume, issue
2023 № 2 (20) Published
Authors
Kuznetsova Nataliya , Karlova Tatyana , Bekmeshov Aleksandr
DOI
https://doi.org/10.30987/2658-6436-2023-2-23-29
Published
30.06.2023
Automation and modeling in design and management
USING AUTOMATIC PROGRAMMING TECHNOLOGY IN THE APPLICATION DEVELOPMENT FOR PROGRAMMING WITH TOOLS
Volume, issue
2023 № 3 (21) Published
Authors
Gumunyuk Pavel , Shurpo Alexandr
DOI
https://doi.org/10.30987/2658-6436-2023-3-4-12
Published
30.09.2023
Automation and modeling in design and management
DESIGNING AN AUXILIARY AUTOMATED MANAGEMENT DECISION MAKING SYSTEM BASED ON INFORMATION SECURITY LEVEL ANALYSIS
Volume, issue
2023 № 3 (21) Published
Authors
Kuznetsova Nataliya , Karlova Tatyana , Bekmeshov Aleksandr
DOI
https://doi.org/10.30987/2658-6436-2023-3-13-22
Published
30.09.2023
Automation and modeling in design and management
DEVELOPING AN ALGORITHM FOR OPERATING THE HARDWARE MODULE OF THE AUTOMATION SYSTEM FOR DEPARTMENTAL PETROL STATIONS
Volume, issue
2023 № 3 (21) Published
Authors
Onufrieva Tat'yana , Razumov Vladislav , Borsuk Natal'ya
DOI
https://doi.org/10.30987/2658-6436-2023-3-23-31
Published
30.09.2023
Automation and modeling in design and management
ON THE PREPARATORY OPERATION OF ROBOTIC WELDING OF A KNUCKLED BRANCH
Volume, issue
2023 № 3 (21) Published
Authors
Chepchurov Mihail , Prokopov Mihail , Kirichenko Aleksandr
DOI
https://doi.org/10.30987/2658-6436-2023-3-32-41
Published
30.09.2023
Automation and modeling in design and management
APPLYING AUTOMATA-BASED PROGRAMMING TECHNOLOGY TO DEVELOP AN AUTOMATIC CONTROL SYSTEM OF A CHECKPOINT FOR PEOPLE AND VEHICLES WITH ONE ENTRY AND ONE EXIT
Volume, issue
2023 № 4 (22) Published
Authors
Gumunyuk Pavel , Shurpo Alexandr
DOI
https://doi.org/10.30987/2658-6436-2023-4-4-11
Published
27.12.2023
Automation and modeling in design and management
AUTOMATIC CONTROL SYSTEM FOR SECOND-ORDER TECHNOLOGICAL PROCESS WITH TIME DELAY BASED ON STATE FEEDBACK CONTROLLER
Volume, issue
2024 № 1 (23) Published
Authors
Krivonosov Vladimir , Korenev Artem Viktorovich
DOI
https://doi.org/10.30987/2658-6436-2024-1-4-12
Published
29.03.2024
Automation and modeling in design and management
AUTOMATING INFORMATION SECURITY PROCESSES BY DEVELOPING A RISK MINIMIZATION MODEL FOR A DESIGN AND TECHNOLOGICAL PROJECT
Volume, issue
2023 № 4 (22) Published
Authors
Karlova Tatyana , Bekmeshov Aleksandr , Tihomirov Aleksey , Kuznetsova Nataliya , Mikhaylova Marianna , Zapol'skaya Anna
DOI
https://doi.org/10.30987/2658-6436-2023-4-12-17
Published
27.12.2023
Automation and modeling in design and management
ANALYSING THE EFFECTIVENESS OF THE COMPUTER-AIDED DESIGN OF HYDRAULIC STATIONS
Volume, issue
2024 № 1 (23) Published
Authors
Orekhov Dmitry
DOI
https://doi.org/10.30987/2658-6436-2024-1-13-20
Published
29.03.2024
Automation and modeling in design and management
MATHEMATICAL MODEL OF THE MAIN PIPELINE TECHNOLOGICAL SECTION WITH THROTTLING CONTROL
Volume, issue
2023 № 4 (22) Published
Authors
Khandozhko Viktor , Matlakhov Vitaliy
DOI
https://doi.org/10.30987/2658-6436-2023-4-18-27
Published
27.12.2023
© INFRA-M
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?