Technological process automation of balancing quartz resonators of solid state wave gyroscopes
Abstract and keywords
Abstract (English):
The paper discusses the main issues that arise while developing and implementing automatic process control systems (APCS) in relation to the technological operations of balancing quartz hemispherical resonators of solid-state wave gyroscopes. For this, the article gives a general algorithm for performing the technological process of resonator balancing; block diagrams of the automatic process control system of balancing and the general algorithm for balancing the resonators. The latter discloses internal algorithms for determining the physical parameters of the gyroscope resonator, for making a decision on resonator balancing and controlling the etching process of the gyroscope quartz resonator. The necessary application software (SW) for the automatic process control system for balancing gyroscope resonators is considered separately. The paper states that to build the first version of the automatic process control system for balancing resonators, it is recommended, as an intermediate step, to modernise and work out the “advising” automatic process control system, which, in the development of the existing locally automatic process control system, should be supplemented by solving the following important tasks: increasing the accuracy of determining physical parameters, calculating the efficiency of the ongoing balancing operation and estimating the effective control of the ion-plasma source. In the considered automatic process control system for balancing the resonators of the solid state wave gyroscopes (SSWG), it is not supposed to completely exclude the system operator’s role and importance. He performs the primary check of the stand, the installation of the resonator in the stand, as well as the initial setup. Automation at the first stage will consist of closing the operations of determining the physical parameters, calculating the balancing efficiency and ion-plasma etching of the quartz resonator. The closure of these operations is carried out with the help of application software installed on the central control computer of the automated workplace of the balancing system operator.

Keywords:
solid-state wave gyroscope, balancing, automation, automatic process control system, software
Text
Publication text (PDF): Read Download
References

1. Shishmarev V.Yu. Automation of Production Processes in Mechanical Engineering. Moscow: Academy; 2007.

2. Mingazov RI, Melnikov RV, et al. Development of an Information-Network Complex to Support Production Operations of Control, Diagnostics and Adjustment of the Accuracy Characteristics of Solid-State Wave Gyroscopes. Intelligent Systems in Manufacturing. 2021;19(1):41-53. doi:https://doi.org/10.22213/2410-9304-2021-1-41-53

3. Trutnev G.A., Perevozchikov K.K., Nazarov S.B. Sensing Systems and Methods for Measuring Oscillations of the Resonator of a Hemispherical Resonator Gyroscope. Herald of the Bauman Moscow State Technical University. Series Instrument Engineering. 2020;1(130):50-63. doi:https://doi.org/10.18698/0236-3933-2020-1-50-63.

4. Lunin B.S., Matveev V.A., Basarab M.A. Wave Solid-State Gyroscope. Theory and Technology. Moscow: Radiotekhnika; 2014.

5. Lunin BS, Basarab MA, et al. Surface Balancing of Resonators of Solid-State Wave Gyroscopes. Theoretical and Applied Aspects of Modern Science. 2014;2-1:74-76.

6. Basarab M.A., Kuzovlev V.I., Lunin B.S. Dynamical Balancing of the Surface of Shell Resonators of Solid-State Wave Gyroscopes. Dynamics of Complex Systems - XXI Century. 2017;11(3):11-15.

7. Chumankin E.A., Lunin B.S., Basarab M.A. Features of Balancing Metal Resonators of Solid-State Wave Gyroscopes. Dynamics of Complex Systems - XXI Century. 2018;12(4):85-95. doi:https://doi.org/10.18127/j19997493-201804-13

8. Basarab MA, Lunin BS, et al. Balancing of Hemispherical Resonators Gyros By Chemical Etching. Gyroscopy and Navigation. 2015;1(88):61-70. doi:https://doi.org/10.17285/0869-7035.2015.23.1.061-070

9. Lunin B.S. Scientific and Technological Foundations for the Development of Hemispherical Resonators of Solid-State Wave Gyroscopes. Doctor of Technical Sciences Dissertation. Moscow; 2006.

10. Nesterov A.L. The Design of Control Systems. Saint Petersburg: Biont; 2006.

11. Andyk V. S. Automated Control Systems for Technological Processes at Thermal Power Plants. Moscow: Yurayt; 2017.

12. Itskovich E.L. Methods of Rational Production Automation. Vologda: Infra-Engineering; 2009.

13. IONTEK-nano [Internet]. Moscow [cited 2022 Aug 25]. Available from: http://iontec.ru/produkciya/ustanovka-ionnoj-balansirovki-kraudion-it1-14-1/

14. Mingazov R.I., Spiridonov F.I., Shishakov K.V. Research Methods of Coasting Standing Waves in a Solid Wave Gyroscope. Intelligent Systems in Manufacturing. 2020;18(3):20-32. doi:https://doi.org/10.22213/2410-9304-2020-3-20-32

15. Mingazov R.I., Shishakov K.V. Investigation of Algorithms for Identification of Wave Parameters in Solid-State Wave Gyroscopes without Adjusting Calculations to the Frequency of Signal. Intelligent Systems in Manufacturing. 2022;20(1):29-42. doi:https://doi.org/10.22213/2410-9304-2022-1-29-42

16. Krivov AV, Melnikov RV, et al. Determining the Parameters of the Resonator of a Solid-State Wave Gyroscope and Modelling Based on Experimental Data. Vestnik of KNRTU n.a. A.N. Tupolev. 2019;75(2):127-133.

17. Mingazov R.I., Spiridonov F.I., Shishakov K.V. Identification of Solid-State Wave Gyroscopes Resonators Mechanical Errors in the Mode of Free Run-out of Standing Waves. Intelligent Systems in Manufacturing. 2022;20(2):4-19. doi:https://doi.org/10.22213/2410-9304-2022-2-4-19

Login or Create
* Forgot password?