1. The text of the article (to a maximum of 15 sheets) as Microsoft Word files. The text of the article should be strictly structured, i.e. (but not limited to): Introduction; Materials and methods; Results and Discussion; Conclusions.

2. Numbered illustrations as a Microsoft Word file.

3. The original illustrations as raster graphics files (with the extension .jpg, .tif, png, etc.), resolution 400 dpi. Drawing annotations are of upright type (neither italics nor bold), proper case. The font is Times, font size 10.

4. Information about the authors (surname, first name, patronymic, academic degree, academic title, name of the organization (institution), its division where the author works or studies, address of the organization (institution), its division where the author works or studies (city and country), position, contact phone and e-mail, the Open Researcher and Contributor ID –ORCID) (if available) as a Microsoft Word file.

5. Information about the contributorship, if a number of authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors:". After the surname and initials of the author, his personal contribution to the writing of the article is briefly outlined (idea, collection and information resources processing, writing of the article, scientific editing, etc.).

6. Information on a non-conflict of interests or if any, the details of such a conflict, if any, are given at the end of the article. Example: Contribution of authors: All authors have made an equivalent contribution to the preparation of the publication. The authors declare that there is no conflict of interests.

7. Expert opinion on the possibility of general publication.

8. Depersonalized text of the article for blind review. All information about the authors, place of work, financing, contribution of the authors and non- conflict interest information is deleted.

9. Text formation for TP

The text of the article should be structured as follows:

1. Information about the article:

1.1. Type of article: scientific article, review article, editorial article, discussion article, editorial note, book review, article review, etc.

1.2. UDC index (can be found by link reference: http://teacode.com/online/udc/).

1.3. The title of the article (the title of the article should be summed up and informative).

1.4. Last name, first name, patronymic of the authors.

1.5. Address data of the authors (name of the organization (institution), its division where the author works or studies, address of the organization (institution), its division where the author works or studies (city and country), e-mail, ORCID). 1.6. The abstract is formed according to National Standard (GOST R 7.0.99-2018). The abstract of the article should be cut up to 200-250 words. The word "Abstract" is given before the annotation. The abstract should briefly reflect the essence of the article: research methods, obtained results, etc.

1.7. Keywords (phrases) should correspond to the topic of the article, reflecting its theme and terminological area. Words with generalized and polysemous meanings can't be used, participial clauses are not possible. The number of keywords (phrases) should not be less than 3 and more than 7 words (phrases). They are given, preceded by the words "Keywords:", and separated from each other by commas. No making a full stop in the final period of keywords.

1.8. Where appropriate, after keywords the acknowledgements are given to organizations (institutions), scientific supervisors and others who lent a hand in the preparation of the article, information about grants, of the preparation and publication of the article, projects, research works within or based on the results of which the article was published. This information is given with the preceding word "Acknowledgements". If necessary, information on the financing of the research, preparation and publication of the article can be given separately with the preceding word "Financing:".

2. The text of the article.

Font – Times New Roman, 12 points, 1.5 line spacing, paged. The dimension of all units must be given in SI system. Formulas are typed in the formula editor Microsoft Equation 3.0.

3. References is drawn up according to the National Standard (GOST R. 7.0.5-2008) and amounts to a minimum of 10. At least 15 titles are allowed in the review article. The after text bibliographic reference list includes reference resources that are mentioned or quoted in the main text of the article. Bibliographic entries in the list of after text bibliographic references are numbered and arranged in the order of citation of sources in the text of the article. References to nonfiction are allowed on or after the date of 1970, 10-year older references accounts for 10% at the most. Self-citation should not exceed 40% of the total number of titles. If the sources have a digital object identifier (DOI) and/or an eLibrary Document Number (END), the identification is required.

4. Information about the contribution of each author, if the article has several authors, is given at the end of the article. This information is preceded by the words "Contribution of the authors". After the surname and initials of the author, his personal contribution to the writing of the article is briefly described (idea, collection, information processing, writing of the article, scientific editing, etc.).

5. Information on the absence or presence of a conflict of interest and the details of such a conflict, if any. Example: Contribution of authors:

All authors have made an equivalent contribution to the preparation of the publication. The authors declare that there is no conflict of interest.

An example of text forming

Submit a manuscript for publication

Information about the authors

Ethics of publication

DECLARATION OF PUBLICATION ETHICS

The editorial policy of the scientific journal "Science-Intensive Technologies in Mechanical Engineering" is based on the traditional ethical principles of Russian scientific periodicals and is built on international ethical standards of editors and publishers in conducting, describing, editing and publishing the results of scientific work. The principles of the International Committee on Publication Ethics (COPE), the basic principles of the Declaration "Ethical Principles of Scientific Publications" of the Ethics Council of the Association of Scientific Editors and Publishers (ASEP) the provisions of Chapter 70 "Copyright law" of the Russian Civil Code (RCC).

In its work, the editorial board of the scientific journal "Science-Intensive Technologies in Mechanical Engineering" also relies on the provisions of the Helsinki Declaration of the World Medical Association (WMA Declaration of Helsinki - Ethical Principles for Medical Research Involving Human Subjects) and is aimed at Ethical practices and rules for data collection for research conducted under human participation. The discovery of ethical violations makes null and void of publication.

1. Responsibilities of the publisher

In all activities, the publisher is responsible for the publication of copyrighted works. The publisher and the founder must follow the principles and procedures that provide ethical standards compliance for editors, reviewers and authors of publications. They shall not influence the editorial policy of a scientific journal. The editorial board of the scientific journal "Science-intensive technologies in Mechanical Engineering" makes an independent decision on the appropriateness of publication, without let or hindrance either from a publisher or a founder. The publisher and the founder should provide legal and other support to the editorial board, when necessary, including in conducting investigations of cases of unfair research and publication practices and make for the settlement of question. They ensure the timeliness for the instalment. The publisher and the founder, subject to arranging details with the editor-in-chief of the journal, can publish edits, explanations and withdraw articles in which violations of scientific ethics or critical errors have been identified. In scenarios where a violation of publication ethics on the part of the editor, author or reviewer appears to be the case, a compelling disclosure is required. This applies to both published and unpublished materials. The editorial board is obliged to demand clarification without involving persons who may have a conflict of interest with one of the parties. In case of publication of the material with significant incorrectness it must be revised with immediate effect in a form accessible to readers and indexing systems. In order to ensure the reliability of the published data, if errors are clear-cut within the paper, it is possible to publish corrections, clarifications, rejections and apologies as soon as possible.

All interested parties should avoid conflicts of interest in any form at all stages of the article's publication process. In the event of a conflict of interest in any form, the person who first discovered such a conflict should immediately inform the editorial office. The same holds for any violations of ethical conventions and rules.

In case of ethical claims regarding articles published in a scientific journal, the editor-in-chief, together with the publisher and the founder, take appropriate measures based on the "Retraction Guidelines" The International Committee on Publication Ethics (COPE). Such measures include a fact-finding inquiry by the editorial board of the scientific journal "Science-Intensive Technologies in Mechanical Engineering" of unethical conduct, interaction with the authors of the scientific article and argumentation of the relevant complaint or claim of the applicant, as well as imply interaction with relevant organizations and research centers within the framework of cooperation on the integrity of the study or publication withdrawal.

2. Responsibilities of authors

When submitting an article to the editorial board, the authors should adhere to a tradition of a prudent approach and be aware of their personal liability for the novelty and reliability of the results of scientific research.

The decision to accept an article is based on:

— the originality of the text;

— scientific relevance and novelty of the material;

— reliability of statistical data and research results;

— compliance of papers with the journal profile;

objectivity of arguments.

By submitting an article to the editorial board, the authors thereby confirm the originality of the article, that it has not been previously published and is not under consideration by the editorial board of another journal. The results discussed in the article should meet the criterion of repeatability by other researchers. All data processing methods, as well as the logic of their interpretation, should be absolutely transparent. All materials submitted to the editorial office are checked using the Anti-Plagiarism text loan detection system (https://tu-bryansk.antiplagiat.ru /). In case of detection of numerous borrowings (duplicate publication, plagiarism, self-plagiarism, unfair citation, etc.), the editorial board reserves the right of further non-cooperation with all co-authors.

Authors can use financial support when publishing their research (all sources of funding should be indicated by the authors in the paper).

Authors should provide only authentic facts and information in the manuscript; do not use information obtained privately (in correspondence, conversation, discussion with third parties or in the provision of confidential services), without written permission of a third party; do not allow fabrication and falsification of data.

All persons who have made a significant contribution to the research should be listed as co-authors of the paper. The author undertakes to indicate correctly all scientific and other sources in the reference list that he used during the preparation of the paper and which had a significant impact on the results of the study. If the author discovers significant errors or inaccuracies in the publication, he must inform the editor of the journal and interact with him to correct the manuscript as soon as possible.

3. Responsibilities of the editor

The editorial board is fully responsible and has the authority to reject or accept papers for publication and should not have a conflict of interest with the materials that are rejected or accepted for publication. The editorial board ensures the confidentiality of the submitted materials until they are accepted for publication. It decides which of the submitted articles should be published based on the results of the verification of compliance with the conditions of publication and the results of the review.

The editorial board of the journal evaluates only the scientific content of the article, regardless of race, nationality, origin, citizenship, gender, occupation, place of work, residence of the author, as well as his political, philosophical, religious and other views.

The editorial board guarantees that the materials of the scientific paper rejected from publication will not be used in the works of the editorial board members without written permission of the author. The final texts of papers should be agreed with the authors. The editorial board protects the reputation of the authors and takes seriously all cases of plagiarism and other facts of unfair behavior when publishing a scientific paper.

The editorial board under no circumstances should force authors to cite articles published in Science Intensive Technologies in Mechanical Engineering or other periodicals as a necessary condition to accept the manuscript for consideration and publication.

When exercising their activity, editors rely on the editorial board. The general management of the editorial office is carried out by the editor-in-chief and deputy editor-in-chief. The editorial board constantly cooperates with other publishers and industry associations on various issues, including ethical issues.

4. Responsibilities of peer reviewers

The reviewers of the journal follow exclusively "double blind" peer review policy. Reviewers carry out a scientific examination of the author's materials and their actions should be unbiased, which means the implementation of the following principles.

The editorial board ensures that reviewers are anonymous.

Reviewers are required to have sufficient qualifications for an expert assessment of the content of a scientific paper. Reviewers should participate in forming the editorial policy of the journal, give an objective assessment (personal criticism of the author is unacceptable). They should submit a review within the time limits specified by the editorial board of the journal. Reviewers should clearly express their opinion giving arguments. Unpublished information obtained from the manuscripts submitted for consideration cannot be used for personal purposes without the written permission of the authors.

If the reviewer identifies incorrect, erroneous provisions or distorted data, he reports this to the editorial board of the journal in the prescribed manner so that the identified violations are eliminated by the author. Reviewers should also indicate the works that influenced the results of the study, but were not given by the author, if any, so they protect the rights of third parties from unauthorized use of materials.

Publication process

Rules of Publication

The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal.
If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.
Authors of papers are not paid a fee; papers are published free of charge.

Requirements to the publications: :https://bstu.editorum.ru/ru/nauka/journal/79/view#about-journal

The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.

All the authors publishing materials in the journal Science-Intensive Technologies in Mechanical Engineering agree to the following terms:

The authors retain copyright and grant the journal the right to the first publication so that allowing other users to share the work with confirmation of the authorship of the work and the initial publication in this journal.
Authors may conclude a standalone agreement for the non-exclusive publicity of the published version of the work (for example, to place it in an institutional repository or as a a book material) with confirmation of its initial publication in this journal.
Authors are allowed and encouraged to post their work online (for example, in institutional repositories or on their website) before and during the submission process, as this can lead to productive sharing, as well as earlier and wider citations of published works.

Requirements to the publications: https://bstu.editorum.ru/ru/nauka/journal/79/view#about-journal

The process of articles reviewing

Referee

Journal edition reviews all materials submitted to the editorial office that correspond to the subject matters for their evaluation. All reviewers hold a PhD of Engineering. All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The recommendations of the reviewers are the basis for making a decision on the publication of the article. The review in the form of a copy is submitted to the editorial board of the journal within the time limits set by the editorial board. The reviewers may be members of the editorial board of the journal.

When positive (or negative) reviews of the article in question are received by the editorial board, one of the members of the editorial board, who is in supervision of the section in which this article is supposed to be published, the editor-in-chief or deputy editor-in-chief, observes it and decides on the possibility of its publication or rejection.

The reviewers of the journal follow exclusively "double blind" peer review policy, that is the identities of the reviewer and the author are withheld from reviewers, and vice versa, throughout the review process. To facilitate this, authors need to make sure that their manuscripts are prepared in a way that withhold their identity. For simplicity of this preparation, please make sure of the following when submitting your application: send your information kit accompanied by a Blind manuscript without information about the author and as a separate file.

Information content for a Blind manuscript preparation:

1. Besides clear need of removing names and references under the title in the manuscript, some other steps must be taken to make sure that the manuscript is properly prepared for double-blind review. To help in this process, the following key points are required:
2. Use a third party to refer to work previously performed by the authors, for example, replace any phrases like “as we showed earlier” with “... it was shown earlier [Anonymous, 2017]".

3. Make sure that the drawings do not contain any identifiers associated with the authoring. Do not exclude significant references to yourself or other references, but limit references only to articles that are relevant to those who review the submitted article.

4. Remove links to funding sources.

5. No acknowledgements

6. Remove any identifying information from the file names, including the names of the authors, make sure that the document properties are also anonymized.

Article retraction process

List of retracted articles

Information about articles retracting is given in the journal and available for electronic libraries and other information sources.

The subscription and the acquisition

Subscription and purchase

Journal circulation is possible by subscription

- on the website of the United Catalog of the Press of Russia www.pressa-rf.ru . Catalog index: 79195;

- on the website of the Online catalog "Subscription Press" www.akc.ru . Catalog index: E79195.

Journal purchasing is possible directly from the journal publisher

Contacts: Mikhail Shalygin, Deputy Editor-in-Chief; phone: +7-4832-56-08-10, +7-903-868-85-68; e-mail: editntm@yandex.ru

Publication fee

There is no publication fee.

Editorial board

Suslov Anatoliy — Chief Editor
Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
doctor of technical sciences
Academic rank Laureat premii Pravitel'stva ,
Honored Master of Sciences and Engineering, RF Government Award Holder
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-2566-2759

Shalygin Mikhail — Deputy Editor-in-chief
Bryansk State Technical University (Department of Pipeline Transportation Systems, Professor, Head of the Department)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-8102-9918

Prikhodko Vyachyeslav — Chairman of the Editorial Board
The Moscow State Technical University - MADI (prof.)
doctor of technical sciences
corresponding member Russian Academy of Sciences ,
professor
Moskva, Moscow, Russian Federation

Grigoryants Aleksandr — Deputy of Chairman of the Editorial Board
Bauman Moscow State Technical University (department “Laser Technology”, Head of the department)
doctor of technical sciences
professor
Moskva, Russian Federation

Bazrov Boris — Editorial Board member
Institute of Mashine Science named after Blagonravov RAS (Chief researcher)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-3297-9818

Buyanovskiy Ilya — Editorial Board member
Institute of Mashine Science named after Blagonravov, RAS (Head of the Laboratory)
doctor of technical sciences
professor
Moskva, Russian Federation
ORCID:0000-0003-0691-5095

Waldenmaier Thomas — Editorial Board member
Robert Bosch GmbH (Senior Expert, Head of the research group)
doctor of technical sciences
Stuttgart, Germany

Huseynov Hasan — Editorial Board member
Azerbaijan Technical University (Department of Mechanical Engineering Technology, professor)
doctor of technical sciences
professor
Baku, Azerbaijan

Demin Virtor — Editorial Board member
Bauman Moscow State Technical University (Department of Pressure Treatment Technology, Professor, Professor)
doctor of technical sciences
professor
Moskva, Russian Federation

Kawalek Anna — Editorial Board member
Czestochowa University of Technology (professor)
doctor of technical sciences
professor
Czestochowa, Poland

Krehel Radoslav — Editorial Board member
Kapusana Bioenergy Research Center (Researcher)
doctor of technical sciences
Kapusany, Slovakia

Kuksenova Lidiya — Editorial Board member
Mechanical Engineering Research Institute of the Russian Academy of Sciences (Chief researcher)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation

Larin Sergey — Editorial board member
Tula State University (Department of Plastic Foming Mechanics, Head of the department)
doctor of technical sciences
professor
Tula, Russian Federation

Lysak Vladimir — Editorial Board member
Volgogradskiy gosudarstvennyy tehnicheskiy universitet (Department of Welding Equipment and Technology, Head of the department)
doctor of technical sciences
academician Russian Academy of Sciences ,
professor
Volgograd, Russian Federation

Makarov Vladimir — Editorial Board member
Perm National Research Polytechnic University (Department of Innovative Engineering Technologies, Professor, Holder of the chair ad interim)
doctor of technical sciences
professor
Perm, Perm, Russian Federation
ORCID:0000-0002-0383-0208

Malikov Andrey — Editorial board member
Tula State University (Department of Mechanical Engineering Technology, Pro-Rector of Financial Activities, Head of the Department)
doctor of technical sciences
professor
Tula, Tula, Russian Federation
ORCID:0000-0002-6757-5584

Mikhailov Alexander — Editorial Board member
Donetsk National Technical University (Department of Mechanical Engineering Technology, Head of the department)
doctor of technical sciences
professor
Doneck, Ukraine

Myshkin Nikolai — Editorial Board member
Institute of Mechanics of Metal Polymer Systems of the National Academy of Sciences of Belarus (Department of Friction and Lubrication, Head of the Department)
doctor of technical sciences
Academic rank Academician of NAS Belarus
professor
Gomel, Belarus

Ovchinnikov Viktor — Editorial board member
Russian Aircraft Corporate Enterprise MiG (Welding processes laboratory, Head of the Laboratory)
doctor of technical sciences
professor
Moscow, Russian Federation

Petrova Larisa — Editorial Board member
Moscow Automobile and Road Engineering State Technical University (MADI) (Department of Construction Materials Engineering, Head of the Department)
doctor of technical sciences
Moskva, Moscow, Russian Federation
ORCID:0000-0002-7248-2454

Smolentsev Vladislav — Editorial Board member
Voronezh State Technical University (Department of Mechanical Engineering Technology, Professor)

Fedonin Oleg — Editorial Board member
Bryansk State Technical University (Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
SPIN: 6889-5411 ORCID:0000-0002-3511-699X

Kheyfets Mikhail — Editorial Board member
State Scientific Institution "Institute of Applied Physics of the National Academy of Sciences of Belarus" (Director of the Institute)
doctor of technical sciences
professor
Minsk, Belarus

Tchigirinsky Uyliy — Editorial Board member
Volgograd State Technical University (Department of Mechanical Engineering Technology, Head of the department)
doctor of technical sciences
professor
Volgograd, Russian Federation
ORCID:0000-0001-5620-5337

Shohiyon Almossho — Editorial Board member
Institute of Technologies and Innovation Management in Kulyab (Rector)
doctor of technical sciences
professor
Kulob, Tajikistan

SCIENCE INTENSIVE TECHNOLOGIES OF NONMETALLIC PARTS PRODUCTION

№	Type of advertising space	Price (including VAT), rub/number
1	Cover, 2nd and 4th pages (module size 280×185 mm)	10 000
2	Cover, 3rd pagee (module size 280×185 mm)	8 000
3	Black and white ad, inside (module size 165×240 mm)	4 000
4	Black and white ad, inside (module size 165×120 mm)	3 000
5	Black and white ad, inside (module size 165×60 mm)	2 000
6	Production of advertising	5,000 rubles/module

№	Type of advertising space	Price (including VAT), rub/number
1	End-to-end (on all pages) placement of a 180×180 pixel advertising banner in the left column of the site. The banner is dynamic	4 000
2	End-to-end (on all pages) placement of a 180×180 pixel advertising banner in the left column of the site. The banner is dynamic	3 000
3	Exchange of banners of 100×100 pixels with mutual interest	1 000
4	Production of advertising	5,000 rubles/module

Referee

List of retracted articles

Subscription and purchase

Publication fee

Архивные рубрики

Item of information on customized edition

Inside the journal:

Referee

List of retracted articles

Publication fee

Subscription and purchase

Mission

OUR MISSION

Confirmation

Регистрация