Journals Monographies Textbooks Collections Authors
Submit manuscript
Home / Journals / Science intensive technologies in mechanical engineering / Rubric PLENARY REPORTS (PROCEEDINGS) OF INTERNATIONAL CONFERENCES AND SEMINAR (archived)

Articles of rubric " PLENARY REPORTS (PROCEEDINGS) OF INTERNATIONAL CONFERENCES AND SEMINAR (ARCHIVED) " of journal " SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING "

Science intensive technologies in mechanical engineering
INNOVATION TECHNOLOGIES IN MECHANICAL ENGINEERING ENSURING LIFE INCREASE OF RAILWAY WHEELS AND RAILS
Volume, issue
2019 № 7 (97) Published
Authors
Suslov Anatoliy , Fedonin Oleg , Gorlenko Oleg , Shalygin Mikhail , Zakharov Leonid
DOI
https://doi.org/10.30987/article_5cf7bd2f83f6b5.55900953
Published
01.07.2019
Science intensive technologies in mechanical engineering
TECHNOLOGICAL POTENTIALITIES IN ULTRASOUND USE FOR OPERATION PROPERTIES INCREASE IN PARTS OF TRANSPORT ENGINEERING
Volume, issue
2019 № 7 (97) Published
Authors
Prikhodko Vyachyeslav , Nigmetzyanov Ravil , Sundukov Sergey , Fatyukhin Dmitriy
DOI
https://doi.org/10.30987/article_5cf7bd2f98e797.67795796
Published
01.07.2019
Science intensive technologies in mechanical engineering
PROBLEMS IN ACCURACY TECHNOLOGICAL SUPPORT OF PRODUCT MASS
Volume, issue
2019 № 7 (97) Published
Authors
Bezyazychnyy Vyacheslav
DOI
https://doi.org/10.30987/article_5cf7bd2fad6808.87115101
Published
01.07.2019
Science intensive technologies in mechanical engineering
FUNDAMENTAL BASE OF TECHNOLOGICAL PRE-PRODUCTION
Volume, issue
2019 № 7 (97) Published
Authors
Bazrov Boris
DOI
https://doi.org/10.30987/article_5cf7bd2fbe4f43.90942178
Published
01.07.2019
Science intensive technologies in mechanical engineering
METHODOLOGY OF MANUFACTURABILITY OPTIMIZATION AT INTRODUCTION OF SCIENCE INTENSIVE AEROSPACE PRODUCTS INTO PRODUCTION
Volume, issue
2019 № 7 (97) Published
Authors
Smolentsev Evgeny , Safonov Sergey , Mandrykin Andrey
DOI
https://doi.org/10.30987/article_5cf7bd2fd406e3.91911126
Published
01.07.2019
Science intensive technologies in mechanical engineering
TECHNOLOGICAL SUCCESSION OF QUALITY OPERATION PARAMETERS IN LIFE CYCLE OF INTERNAL COMBUSTION ENGINE PARTS
Volume, issue
2019 № 7 (97) Published
Authors
Kheifets M. , Gretsky Nikolai , Prement G.
DOI
https://doi.org/10.30987/article_5cf7bd2fec77a9.13115279
Published
01.07.2019
Science intensive technologies in mechanical engineering
USE OF DIFFERENT METHODS OF LOCAL SPD (SURFACE PLASTIC DEFORMATION) TO REDUCE STRESS CONCENTRATOR IMPACT UPON PROFILE SURFACES OF TRANSPORT MACHINERY PARTS
Volume, issue
2019 № 7 (97) Published
Authors
Makarov Vladimir , Gorbunov Alexander
DOI
https://doi.org/10.30987/article_5cf7bd300bb206.32507323
Published
01.07.2019
Science intensive technologies in mechanical engineering
INNOVATION TECHNOLOGIES IN METAL PRESSURE FORMING FOR TRANSPORT ENGINEERING
Volume, issue
2019 № 8 (98) Published
Authors
Demin Viktor
DOI
https://doi.org/10.30987/article_5d2635cb0c0263.12766834
Published
16.08.2019
Science intensive technologies in mechanical engineering
THERMAL TREATMENT INNOVATION TECHNOLOGY OF BOGIE SIDE FRAME IN FREIGHT CAR ENSURING ITS FATIGUE STRENGTH INCREASE
Volume, issue
2019 № 8 (98) Published
Authors
Savrukhin Andrey , Evseev Dmitriy , Neklyudov Alexey
DOI
https://doi.org/10.30987/article_5d2635cb224a89.81941775
Published
16.08.2019
Science intensive technologies in mechanical engineering
INNOVATION TECHNOLOGIES IN FINISH-STRENGTHENING WITH SURFACE PLASTIC DEFORMATION IN TRANSPORT COMPLEX
Volume, issue
2019 № 8 (98) Published
Authors
Blyumenstein Valeriy
DOI
https://doi.org/10.30987/article_5d2635cb370c77.32034089
Published
16.08.2019
Science intensive technologies in mechanical engineering
TECHNOLOGICAL INHERITANCE MANIFESTATION AT HARDNESS INVESTIGATIONS OF DEFORMATION-THERMAL STRENGTHENED STEELS
Volume, issue
2019 № 8 (98) Published
Authors
Kirichek Andrey
DOI
https://doi.org/10.30987/article_5d2635cb4d7804.69744207
Published
16.08.2019
Science intensive technologies in mechanical engineering
CONTROL AUTOMATION OF SURFACE LAYER QUALITY PARAMETERS AND MACHINERY OPERATION PROPERTIES AT CUTTING
Volume, issue
2019 № 8 (98) Published
Authors
Suslov Anatoliy , Petreshin Dmitriy , Fedonin Oleg , Khandozhko Viktor
DOI
https://doi.org/10.30987/article_5d2635cb62fb56.07245294
Published
16.08.2019
Science intensive technologies in mechanical engineering
CHIPS FORMATION PECULIARITIES AT POLYMERIC COMPOSITE PROCESSING
Volume, issue
2019 № 8 (98) Published
Authors
Zubarev Yuriy , Priyomyshev Alexsandr
DOI
https://doi.org/10.30987/article_5d2635cb77dfd6.90010587
Published
16.08.2019
Science intensive technologies in mechanical engineering
INFORMATION STRUCTURE OF ROUTE TECHNOLOGICAL DESIGNING
Volume, issue
2019 № 8 (98) Published
Authors
Tchigirinsky Uyliy
DOI
https://doi.org/10.30987/article_5d2635cb8bb590.52117741
Published
16.08.2019
Science intensive technologies in mechanical engineering
QUALITY CONTROL, STAFF TRAINING AND ORGANIZATION OF COMPETITIVE AND ADVANCED TECHNOLOGY PRODUCTION
Volume, issue
2018 № 4 (82) Published
Authors
Vasiliev Viktor , Alexandrova Svetlana
DOI
https://doi.org/10.12737/article_5aacd858679002.62480776
Published
19.04.2018
Science intensive technologies in mechanical engineering
TECHNOLOGICAL INCREASE OF MACHINERY OPERATION PROPERTIES
Volume, issue
2018 № 4 (82) Published
Authors
Kirichek Andrey
DOI
https://doi.org/10.12737/article_5aacd858c344d8.93651834
Published
19.04.2018
© INFRA-M
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?