BASIC GEOMETRY AND GRAPHICS TRAINING ON THE BASIS OF 3D ELECTRONIC MODELS
Abstract and keywords
Abstract (English):
The article offers a variant of geometry and graphics training (GGP) based on the 3D electronic models, methodological principles and elements of design activity logic. The course uses the multifunctional CAD design technology CAD/CAE/CAM-block in GGP. Perfection of CAD-systems interface simplifies procedures of analysis and synthesis of electronic 3D models and their onscreen images. On the basis of 3D modeling more natural methodological approaches are used (from the whole to the part), the role of methodically clear understanding by trainees of purposes of analysis and synthesis of geometric models. Therefore, the 3D geometric models of technical objects are the primary content of the course.

Keywords:
new issues and trends, 3D electronic model, variant of the GGP basic course, NX.
Text

Геополитическая ситуация, складывающаяся последнее время в связи с санкционной политикой в отношении России, определяет необходимость активнее идти по пути импортозамещения не только промышленной, но и интеллектуальной продукции. Эта реальность требует кратно усилить и ускорить решение общепризнанных проблем отечественного инженерного образования. Потребность в быстрой и качественной подготовке инженерных кадров не менее остра, чем в период нашей индустриализации в первой половине прошлого века. В этом контексте будущее геометро-графической подготовки (ГГП) как составляющей инженерной подготовки видится в направлении ее более широкой интеграции, как минимум, с элементами проектной подготовки или, еще шире, дизайнерской. Уровень развития современных инженерных информационных и коммуникационных технологий позволяет комплексно реализовать эти идеи в рамках возможных сценариев учебной деятельности, описанных в [9; 11; 12; 14]. На фоне современных процессов модернизации инженерной деятельности [10; 11] можно говорить, что задачи совершенствования ГГП и инженерной подготовки так связаны между собой, что их трансформации не могут быть успешно реализованы изолированно друг от друга.

References

1. Volkov V.Ja. Kurs nachertatel´noj geometrii na osnove geometricheskogo modelirovanija [A course in descriptive geometry-based geometric modeling]. Omsk, SibADI Publ., 2010.

2. Gornov A.O. Bazovaja inzhenernaja geometro-graficheskaja podgotovka na osnove 3D-modelirovanija (soderzhatel´naja chast´) [Basic engineering geometro-graphic preparation based 3D modeling]. IV Mezhd. internet-konf. KGP-2014 [IV International Internet Conference KGP2014]. Available at: http://dgng.pstu.ru/conf2012/papers/78/ (Accessed 14 March 2014).

3. Gornov A.O. Modernizirovannyj kurs teorii postroenija chertezha [Modernized course theory drawing]. Problemy kachestva graficheskoj podgotovki (KGP-2012). III Mezhd. internet-konf. [Quality problems graphic preparation (CHP-2012) // III International Internet Conference]. Available at: http://dgng.pstu.ru/conf2012/papers/69/ (Accessed 10 February 2014).

4. Gornov A.O., Zaharova L.V., Gubarev A.Ju. Prakticheskaja chast´ modificiro-vannogo kursa teorii postroenija chertezha [The practical part of the modified course theory drawing]. Problemy kachestva graficheskoj podgotovki (KGP-2012). III Mezhd. internet-konf. [Quality problems graphic preparation (CHP-2012) // III International Internet Conference] Available at: http://dgng.pstu.ru/conf2012/papers/71/ (Accessed 12 February 2013).

5. Gornov A.O. Sostojanie i perspektivy bazovoj geometrograficheskoj podgotovki inzhenerov [Status and prospects of the basic geometro-graphic training of engineers]. Mezhdunarodnaja nauchno-prakticheskaja konferencija [International Scientific and Practical Conference]. Brest, BrGTU Publ., 2013, pp. 32-37.

6. Gornov A.O. Novye informacionnye tehnologii i mezhdisciplinarnye svjazi [New information technologies and interdisciplinary communication]. Trudy Mezhdunarodnoj nauchno-metodicheskoj konferencii INFORINO-2012 [Proceedings of the International Scientific and Technical Conference INFORINO-2012]. Moscow, MEI Publ., 2012, pp. 27-28.

7. Gornov A.O. Inzhenernaja podgotovka v tehnicheskih universitetah Evropy i SShA (sopostavlenie s estestvennoj fraktal´noj strukturoj podgotovki) [Engineering training at the technical universities of Europe and the United States (compared with natural fractal structure of training)]. IV Mezhd. internet-konf. KGP-2014 [IV International Internet-Conference KGP-2014]. Available at: http://dgng.pstu.ru/

8. Gornov A.O. Osnovnye polozhenija koncepcii estestvennoj struktury inzhenernoj podgotovki (Natural occurring Learning - NL) [The main provisions of the concept of natural structures engineering training (Natural occurring Learning - NL)]. Obrazovanie i samorazvitie [Education and self-development]. 2013, i. 4, pp. 30-36.

9. Leparov M.N., Popov M.H. Sostojanie i tendencii geometrograficheskoj podgotovki kak komponenty inzhenernogo obrazovanija v Bolgarii [Status and trends of geometrographic training as components of engineering education in Bulgaria]. Geometrija i grafika [Geometry and Graphics]. 2014, v. 2, i. 1, pp. 22-29. DOI:https://doi.org/10.12737/3845.

10. Nastrojka obrazovatel´nyh struktur v Evrope. Vklad universitetov v Bolonskij process [Tuning educational structures in Europe. Universities contribution to the Bologna-RCM process]. Available at: http://www.hse.ru/data/2010/12/17/1208295030/Introduction_Tuning%20Educational%20Structures.pdf/

11. Red´kin V.F. Inzhenernaja grafika s osnovami proektirovanija [Engineering Graphics with the basics of design]. Tehnicheskie nauki - ot teorii k praktike. Materialy X Mezhdunar. zaoch. nauch. prakt. konf [Engineering graphics with design fundamentals. Materials of the X International extramural scientific and practical conference]. Novosibirsk, Siberian Association of Consultants Publ., 2012. pp. 7-13.

12. Sosnin N.V. Geometricheskaja i graficheskaja podgotovka v strukture soderzhanija kompetentnostnoj modeli vysshego tehnicheskogo obrazovanija [Geometric and graphic preparation in the content structure of a competence model of higher technical education]. Materialy III Mezhdunarodnoj internetkonferencii [Proceedings of the III International Internet-Conference]. Perm´, PermGTU Publ., 2012, pp. 47-60.

13. Usanova E.V., Gornov A.O., Shacillo L.A. Formirovanie obrazovatel´nyh programm v kontekste koncepcii estestvennoj struktury (NL) inzhenernoj podgotovki [The formation of educational programs in the context of the concept of naturaltion patterns (NL) engineering training]. Materialy shestoj Mezhdunarodnoj nauchno-prakticheskoj konferencii «Jelektronnaja Kazan´-2014» [Proceedings of the Sixth International Scientific-Practical Conference «Electronic Kazan-2014»]. In 2 parts. Part 1. Kazan´, JuNIVERSUM Publ., 2014, pp. 176-184.

14. Usanova E.V. Kompleksnoe primenenie media-tehnologij i CAD-sistem v geometro-graficheskoj podgotovke studentov [Integrated use of media technologies and CAD systems in geometro graphic preparing students]. Geometrija i grafika [Geometry and Graphics]. V. 1, i. 1, pp. 63-67. DOI:https://doi.org/10.12737/479.

15. Usanova E.V. Psihologo-pedagogicheskie aspekty geometrograficheskoj podgotovki v tehnicheskom vuze s ispol´zovaniem media-tehnologij i CAD-sistem [Psychological and pedagogical aspects of geometro-graphic training in a technical University with the use of media technology and CAD systems]. Geometrija i grafika [Geometry and Graphics]. V. 1, i. 1, pp. 59-62. DOI:https://doi.org/10.12737/478.

Login or Create
* Forgot password?