Обложка журнала
Title (English)
GEOMETRY & GRAPHICS
Language of publication
Russian
ISSN
2308-4898 (print)
Russian science citation index:
Yes 38845
Russian higher attestation Commission:
Yes

Requirements for the paper

Content Requirements

The journal publishes articles that match the aims and scope of the journal and its headings. An article must be original, previously unpublished, and must not violate intellectual property rights of third parties.

Length of paper: 20-40 thousand characters (including spaces).

Design requirements

The text should be typed in Microsoft Word, and savedin DOC, DOCX, or RTF formats. File name should include author's name and article's title.

Paper Structure:

  • name of the author, title;
  • abstract (100-250 words);
  • keywords (5-7 words or phrases, separated by semicolon);
  • full text of the article (the main text font : Times New Roman; font-size body text is 12 PT; margins: top and bottom - 2 sm, right and left - 3 sm; line spacing - single; indent the first line of the paragraph - 1,25 sm; text-align justify; references in formulas are given in parentheses; for formulas in the formula editor; pictures by means of Word; raster images are provided as separate JPG files of minimum 300 dpi resolution);
  • references;
  • information about the author: position, scientific degree, academic rank; the address information of the author(s) (organization(s), address(s); e-mail of all or one author).

To highlight text use bold and italic. It is recommended to use italic for examplesand bold for new terms and concepts.

It is not recommended to use UPPERCASE, sp a c i n g and an underscore; footnotes.

An author's photo should be included together with the text of the manuscript.

All Illustrative materials should be in TIFF or JPG filesof minimum 300 dpi resolution (if available).

This section is in progress.

Publishing procedure

Submitting manuscripts

You can submit an article:

  • either by registering on the Naukaru.ru website and filling the application form in your Personal Account;
  • or by e-mailing the article to mag4@naukaru.ru.

Note that your application must meet the Requirements for the paper.

Accepting manuscripts

On receiving an application the Editor- in-chief (or the Deputy-Chief Editor) decides whether the article matches the topics relevant to the journal and conforms to the Requirements for the paper.

Articles that do not qualifyare returned to the author with reasons for rejection.

Articles that satisfy the requirements are reviewed primarily by the members of the Editorial board.

Reviewing manuscripts

Articles of Doctors are reviewed by Doctors, articles of PhDs and of authors without scientific degrees are reviewed by Doctors and PhDs.

An article can't be reviewed by itsauthor (co-author); however, it may be reviewed by the Academic adviser.

Reviewing is carried out on condition of anonymity.

Articles of Members and Corresponding Members of the Russian Academy of Sciences and the Russian Academy of Education, as well as of members of the Editorial board, are not reviewed.

The review is provided to the author upon his/her written request without any signature, i.e. referee's name, position, or place of employment.

The review is available upon request of the Expert Council of the Higher Attestation Commission of the Russian Federation.

The review must reveal the assessment of validity and originality of the topic. The final part of the review must provide a clear recommendation either on publishing the article "as is", or on its improving or revising.

The article modified or revised by the author is resubmitted for review along with its initial version in as short a time as possible. If an article is held up for more than three months or requires another revision, it is treated as a new one.

After a paper has been peer-reviewedthe Editor- in-chief makes the decision on publishing the article; if necessary, the decision is made by the Editorial board on its meeting on the next issue of the journal.

If the article is accepted, authors are informed via e-mail.

Signing the Agreement

After the article is accepted for publication, the author signs License agreement with the publishing house, i.e. provides the necessary data, prints the contract, signs it and posts it to the publisher.

Publication

On being published in a journal issue the article is assigned DOI, and its metadata is supplied to the RSCI.

The author receives a conformation e-mail about publishing of his/her article.

The author can request a free PDF file of the article or buy a paper issue.

Reviewing and publishing of articles is free of charge.

Ishchenko A. A.  — Glavnyy redaktor
Moscow Technological University (Moscow State University of Fine Chemical Technologies named after M.V. Lomonosov, Department of Analytical Chemistry, Head of Department)
doctor of chemical sciences
Russian Federation
Vyshnyepolskiy Vladimir  — Zamestitel' glavnogo redaktora, chlen redsoveta
MIREA — Russian Technological University (Department of Engineering Graphics, Head)
candidate of technical sciences
docent
Moskva, Moscow, Russian Federation
Sal'kov N.  — Deputy editor-in-chief, member of the editorial Board
Moscow State Academic Art Institute named after V.I. Surikov (Department of architecture, Professor)
employee from 01.10.2008 until now
candidate of technical sciences
professor
Russian Federation
Borodkin Nikolay Nikolaevich  — Chlen redsoveta
Tula, Russian Federation
Vinogradov Viktor Nikonovich  — Chlen redsoveta
Belarus
Voloshinov Denis  — Chlen redsoveta
The Bonch-Bruevich St.-Petersburg State University of Telecommunications (Professor)
doctor of technical sciences
Sankt-Peterburg, St. Petersburg, Russian Federation
Volkov V. Yakovlevich  — Chlen redsoveta
Netherlands
Hirsch Anton  — Chlen redsoveta
Germany
Dvoreckiy Aleksandr Timofeevich  — Chlen redsoveta
Netherlands
Ivanov Gennadiy Sergeevich  — Chlen redsoveta
Bauman Moscow State Technical University (Professor)
doctor of technical sciences
Moskva, Moscow, Russian Federation
Ischenko Anatoliy Aleksandrovich  — Chlen redsoveta
Moscow, Russian Federation
Leparov M.  — Chlen redsoveta
Technical University of Sofia (Professor)
candidate of technical sciences
Sofiya, Bulgaria
Manevich Michael  — Chlen redsoveta
Israel
Parvulyusov Yu. Borisovich  — Chlen redsoveta, chlen redkollegii
Moscow State University of Geodesy and Cartography (professor)
candidate of technical sciences
Moskva, Moscow, Russian Federation
Schöcker Hans-Peter  — Chlen redsoveta
Austria
Stachel Hellmuth  — Chlen redsoveta
Austria
Stolbova Irina  — Chlen redsoveta
Perm National Research Polytechnic University
Russian Federation
Scheglov Georgiy  — Chlen redsoveta
Bauman Moscow State Technical University (Professor)
doctor of technical sciences
Moscow, Russian Federation
Weiss Günter  — Chlen redsoveta
Austria
Kadykova Nina S.  — Chlen red. soveta
MIREA — Russian Technological University (Department of Engineering Graphics, Associate Professor)
candidate of technical sciences
docent
Russian Federation
Kaygorodtseva N. Viktorovna  — Chlen red. soveta
Omsk State Technical University
Omsk, Omsk, Russian Federation
Ploskiy Vitaliy Alekseevich  — member of the editorial Board
Ukrainskaya associaciya po prikladnoy geometrii (Prezident)
doctor of technical sciences
professor
Ukraine
Lomov Stanislav  — a member of ed. Board
Moscow Region State University
doctor of pedagogical sciences
Moscow, Russian Federation
Subocheva Marina  — a member of ed. Board
Moscow State University of Education
doctor of pedagogical sciences
Russian Federation
Rustamyan Vyacheslav  — a member of ed. Board
MIREA — Moscow Technological University (Senior Lecturer)
Moskva, Moscow, Russian Federation
Sogomonyan K. A.  — member of the editorial Board
Armenian National Polytechnic University
doctor of technical sciences
professor
Russian Federation
Sklyankina Dar'ya  — Vypuskayuschiy redaktor
Russian Federation
SCIENTIFIC PROBLEMS OF GEOMETRY
QUESTIONS OF GRAPHICS
METHODICAL QUESTIONS OF TEACHING
TECHNIQUE OF PREPARATION AND CARRYING OUT ACADEMIC COMPETITION
QUESTIONS OF GEOMETRY
COMPUTER GRAPHICS
HISTORY OF SCIENCE AND TECHNICS. BIOGRAPHIES
ENGINEERING GRAPHICS AND DRAFTING
FROM THE CHIEF EDITOR
WORD OF THE EDITORIAL BOARD
EDITOR'S WORD
COMPUTER SIMULATION
Publisher
INFRA-M Academic Publishing LLC.
Registration address
127282, g. Moskva, ul. Polyarnaya, d. 31V, str. 1
The certificate of registration of the periodical
ПИ № ФС77-50523

Requirements for the paper

Content Requirements

The journal publishes articles that match the aims and scope of the journal and its headings. An article must be original, previously unpublished, and must not violate intellectual property rights of third parties.

Length of paper: 20-40 thousand characters (including spaces).

Design requirements

The text should be typed in Microsoft Word, and savedin DOC, DOCX, or RTF formats. File name should include author's name and article's title.

Paper Structure:

  • name of the author, title;
  • abstract (100-250 words);
  • keywords (5-7 words or phrases, separated by semicolon);
  • full text of the article (the main text font : Times New Roman; font-size body text is 12 PT; margins: top and bottom - 2 sm, right and left - 3 sm; line spacing - single; indent the first line of the paragraph - 1,25 sm; text-align justify; references in formulas are given in parentheses; for formulas in the formula editor; pictures by means of Word; raster images are provided as separate JPG files of minimum 300 dpi resolution);
  • references;
  • information about the author: position, scientific degree, academic rank; the address information of the author(s) (organization(s), address(s); e-mail of all or one author).

To highlight text use bold and italic. It is recommended to use italic for examplesand bold for new terms and concepts.

It is not recommended to use UPPERCASE, sp a c i n g and an underscore; footnotes.

An author's photo should be included together with the text of the manuscript.

All Illustrative materials should be in TIFF or JPG filesof minimum 300 dpi resolution (if available).

This section is in progress.

Publishing procedure

Submitting manuscripts

You can submit an article:

  • either by registering on the Naukaru.ru website and filling the application form in your Personal Account;
  • or by e-mailing the article to mag4@naukaru.ru.

Note that your application must meet the Requirements for the paper.

Accepting manuscripts

On receiving an application the Editor- in-chief (or the Deputy-Chief Editor) decides whether the article matches the topics relevant to the journal and conforms to the Requirements for the paper.

Articles that do not qualifyare returned to the author with reasons for rejection.

Articles that satisfy the requirements are reviewed primarily by the members of the Editorial board.

Reviewing manuscripts

Articles of Doctors are reviewed by Doctors, articles of PhDs and of authors without scientific degrees are reviewed by Doctors and PhDs.

An article can't be reviewed by itsauthor (co-author); however, it may be reviewed by the Academic adviser.

Reviewing is carried out on condition of anonymity.

Articles of Members and Corresponding Members of the Russian Academy of Sciences and the Russian Academy of Education, as well as of members of the Editorial board, are not reviewed.

The review is provided to the author upon his/her written request without any signature, i.e. referee's name, position, or place of employment.

The review is available upon request of the Expert Council of the Higher Attestation Commission of the Russian Federation.

The review must reveal the assessment of validity and originality of the topic. The final part of the review must provide a clear recommendation either on publishing the article "as is", or on its improving or revising.

The article modified or revised by the author is resubmitted for review along with its initial version in as short a time as possible. If an article is held up for more than three months or requires another revision, it is treated as a new one.

After a paper has been peer-reviewedthe Editor- in-chief makes the decision on publishing the article; if necessary, the decision is made by the Editorial board on its meeting on the next issue of the journal.

If the article is accepted, authors are informed via e-mail.

Signing the Agreement

After the article is accepted for publication, the author signs License agreement with the publishing house, i.e. provides the necessary data, prints the contract, signs it and posts it to the publisher.

Publication

On being published in a journal issue the article is assigned DOI, and its metadata is supplied to the RSCI.

The author receives a conformation e-mail about publishing of his/her article.

The author can request a free PDF file of the article or buy a paper issue.

Reviewing and publishing of articles is free of charge.

                        Abdurahmanov Sherzod
Abdurahmanov Sherzod Namangan Institute of Civil Engineering
doctoral candidate
candidate of pedagogical sciences

docent

                        Abrosimov S. N.
Abrosimov S. N. Baltic State Technical University “VOENMEKH” named after D.F. Ustinov (Associate Professor)
candidate of technical sciences

docent ,
docent ,
docent ,
docent ,
docent ,
docent

                        Aleksyuk A.
Aleksyuk A. Maritime State University named after admiral G.I. Nevelskoy (MSUN) (the Department of Descriptive Geometry and Graphics, Associate Professor)
candidate of technical sciences


                        Antonova I. V.
Antonova I. V. MIREA – Russian Technological University (kafedra vysshey i prikladnoy matematiki, Associate Professor)
candidate of pedagogical sciences


                        Aristov V.
Aristov V. Rossiyskiy himiko-tehnologicheskiy universitet imeni D.I. Mendeleev (prorektor po uchebno-metodicheskoy rabote)
doctor of physical and mathematical sciences


                        Ayusheev T. V.
Ayusheev T. V. East Siberia State University of Technology and Management (Associate Professor)
doctor of technical sciences


                        Babich E.
Babich E. Ural State University of Railway Transport (Senior Lecturer)


                        Bashkatov Alexander
Bashkatov Alexander 60/5000 Pridnestrovskiy gosudarstvennyy universitet im. T.G.Shevchenko Pridnestrovian State University. TG Shevchenko (Software of computer facilities and automated systems, assistant professor)
doctoral candidate from 01.09.2005 to 28.04.2018


                        Bayanov E. V.
Bayanov E. V. Novosibirsk State Technical University (Head)
candidate of physical and mathematical sciences


                        Beglov I. A.
Beglov I. A. MIREA — Russian Technological University (Lecturer)
candidate of technical sciences


                        Bezditnyi A. A.
Bezditnyi A. A. Sevastopol branch of «Plekhanov Russian University of Economics»
employee
candidate of technical sciences


                        Boykov A.
Boykov A. MIREA – Russian Technological University (Department of Engineering Graphics, Senior Lecturer)


                        Boykov Aleksey
Boykov Aleksey Ivanovo State Power University named after V.I. Lenin (ISPU) (Associate Professor)


Ishchenko A. A.  — Glavnyy redaktor
Moscow Technological University (Moscow State University of Fine Chemical Technologies named after M.V. Lomonosov, Department of Analytical Chemistry, Head of Department)
doctor of chemical sciences

Russian Federation
Vyshnyepolskiy Vladimir  — Zamestitel' glavnogo redaktora, chlen redsoveta
MIREA — Russian Technological University (Department of Engineering Graphics, Head)
candidate of technical sciences

docent
Moskva, Moscow, Russian Federation
Sal'kov N.  — Deputy editor-in-chief, member of the editorial Board
Moscow State Academic Art Institute named after V.I. Surikov (Department of architecture, Professor)
employee from 01.10.2008 until now
candidate of technical sciences

professor
Russian Federation
Borodkin Nikolay Nikolaevich  — Chlen redsoveta

Tula, Russian Federation
Vinogradov Viktor Nikonovich  — Chlen redsoveta

Belarus
Voloshinov Denis  — Chlen redsoveta
The Bonch-Bruevich St.-Petersburg State University of Telecommunications (Professor)
doctor of technical sciences

Sankt-Peterburg, St. Petersburg, Russian Federation
Volkov V. Yakovlevich  — Chlen redsoveta

Netherlands
Hirsch Anton  — Chlen redsoveta

Germany
Dvoreckiy Aleksandr Timofeevich  — Chlen redsoveta

Netherlands
Ivanov Gennadiy Sergeevich  — Chlen redsoveta
Bauman Moscow State Technical University (Professor)
doctor of technical sciences

Moskva, Moscow, Russian Federation
Ischenko Anatoliy Aleksandrovich  — Chlen redsoveta

Moscow, Russian Federation
Leparov M.  — Chlen redsoveta
Technical University of Sofia (Professor)
candidate of technical sciences

Sofiya, Bulgaria
Manevich Michael  — Chlen redsoveta

Israel
Parvulyusov Yu. Borisovich  — Chlen redsoveta, chlen redkollegii
Moscow State University of Geodesy and Cartography (professor)
candidate of technical sciences

Moskva, Moscow, Russian Federation
Schöcker Hans-Peter  — Chlen redsoveta

Austria
Stachel Hellmuth  — Chlen redsoveta

Austria
Stolbova Irina  — Chlen redsoveta
Perm National Research Polytechnic University

Russian Federation
Scheglov Georgiy  — Chlen redsoveta
Bauman Moscow State Technical University (Professor)
doctor of technical sciences

Moscow, Russian Federation
Weiss Günter  — Chlen redsoveta

Austria
Kadykova Nina S.  — Chlen red. soveta
MIREA — Russian Technological University (Department of Engineering Graphics, Associate Professor)
candidate of technical sciences

docent
Russian Federation
Kaygorodtseva N. Viktorovna  — Chlen red. soveta
Omsk State Technical University

Omsk, Omsk, Russian Federation
Ploskiy Vitaliy Alekseevich  — member of the editorial Board
Ukrainskaya associaciya po prikladnoy geometrii (Prezident)
doctor of technical sciences

professor
Ukraine
Lomov Stanislav  — a member of ed. Board
Moscow Region State University
doctor of pedagogical sciences

Moscow, Russian Federation
Subocheva Marina  — a member of ed. Board
Moscow State University of Education
doctor of pedagogical sciences

Russian Federation
Rustamyan Vyacheslav  — a member of ed. Board
MIREA — Moscow Technological University (Senior Lecturer)

Moskva, Moscow, Russian Federation
Sogomonyan K. A.  — member of the editorial Board
Armenian National Polytechnic University
doctor of technical sciences

professor
Russian Federation
Sklyankina Dar'ya  — Vypuskayuschiy redaktor

Russian Federation

UDK

Code 51
Name Математика

Mission

Mission

Geometry and graphics is a scientific journal of geometry, drawing, computer graphics, teaching graphic disciplines and other subjects connected with geometry and graphics. The journal is supported by the leading Russian Research and Educational centres of topical fields such as: Lomonosov Moscow State University of Fine Chemical Technologies (MITHT), MOSCOW STATE ACADEMIC ART INSTITUTE N.A. V.I. SURIKOV OF RUSSIAN ACADEMY OF ARTS (MSAAI), Moscow State University of Civil Engineering (MGSU) National Research University (NIU MGSU), National University of Science and Technology MISiS, and others.

Despite significant progress in geometry, computer graphics and, in a smaller measure, in teaching graphic disciplines, many unresolved tasks form a considerable field for theoretical and practical research. This kind of researches form the main part of the Journal's contents.

We aim to promote the Russian scientific school of engineering geometry and computer graphics by consecutive forming of the body of knowledge on the most actual problems of Geometry applications, and by providing the base for interpenetration of researchers' ideas.

Our medium-term goals are ensuring high scientific level of the journal and publishing articles in both Russian and English to enter the international level.

We publish researches on scientific problems, concepts, models, methods, development history in geometry, engineering and computer graphics, study programs, teaching, and computer graphics. Special attention is paid to research of applications of geometry and computer graphics in construction, mechanical engineering, software development, etc., and special innovative, hi-tech projects. Articles on historical aspects of geometry and graphics development in Russia and abroad we consider as actual.

All this forms sections of the journal, among which are (in order of importance):

  • scientific problems of geometry;
  • engineering graphics and drawing;
  • computer graphics;
  • teaching graphic disciplines;
  • technique of preparing and carrying out academic competitions on graphic disciplines;
  • biographies of scientists of geometry and graphics;
  • history of science and engineering.

This list cannot be considered full, as new headings will emerge along with the development of the journal.

Geometry and graphics is a journal for researchers of geometry and graphics, teachers and administration of institutes, universities, colleges, and schools, as well as for all interested in geometry.

Issued 4 times a year.

Included into Ulrich global periodicals directory.

Subscription index of Rospechat agency - 25181.

Glavnyy redaktor
Ishchenko A. A.
Zamestitel' glavnogo redaktora, chlen redsoveta
Vyshnyepolskiy Vladimir
Deputy editor-in-chief, member of the editorial Board
Sal'kov N.
nikolaysalkov@mail.ru
Vypuskayuschiy redaktor
Sklyankina Dar'ya
501@infra-m.ru
Login or Create
* Forgot password?