Russian Federation
Russian Federation
Russian Federation
The COVID-19 pandemic caused a serious crisis in the Russia’s education system, associated with the simultaneous universal transition to distance learning, which required the mobilization of all information and communication resources, and intensification of efforts to create conditions for e-distance learning implementation. In this paper the organizational and pedagogical conditions for the effectiveness of high educational institutions’ students distance work in the Moodle e-learning environment when studying "Descriptive Geometry" course have been theory-based and defined. Has been performed generalization of pedagogical experience and analysis of scientific literature on education informatization. Have been presented the concept and algorithm of the developed electronic course, which includes interactive lectures, practical studies and test tasks. The system of statistical indicators used to optimize test tasks, whose calculation incorporated into the Moodle system, has been considered: the ease index of test tasks, standard deviation, discrimination index, and discrimination coefficient. Have been presented the results of survey findings for students on the peculiarities of working with "Descriptive Geometry" electronic course. Effective organizational and pedagogical conditions for the widespread introduction of "Descriptive Geometry" electronic course during the pandemic have been identified. In the paper’s postlude have been presented ways for further development and improvement of the electronic course. In particular, for educational process’s quality improvement, it is proposed the follows: - to transfer the input control and assessment of students' subject readiness to study graphic disciplines in the Moodle system; - to create appropriate materials for repeating geometry and drawing school courses, to which a student will be redirected depending on test results; - to develop an e-course working algorithm, building a certain trajectory of learning adapted to a particular student.
Moodle e-learning environment, COVID-19 pandemic, descriptive geometry, organizational and pedagogical conditions, distance learning, e-courses
1. Abrosimov S.N., Tihonov-Bugrov D.E., Glazunov K.O. Geometro-graficheskie studencheskie olimpiady v Sankt-Peterburge [Geometric and graphic student Olympiads in Saint Petersburg]. Geometriya i grafika [Geometry and Graphics]. 2019, V. 7, I. 2, pp. 76-86. DOI:https://doi.org/10.12737/article_5d2c350baf0b28.40160405. (in Russian)
2. Andryushkova O.V., Gorbunov M.A., Kozlova A.V. Learning Management System kak neobhodimyj element Blended Learning [Learning Management System as a necessary element of Blended Learning]. Otkrytoe obrazovanie [Open education]. 2017, I. 3, pp. 80-88. DOI:https://doi.org/10.21686/1818-4243-2017-3-80-88. (in Russian)
3. Blagodinova V.V., Vinnik V.K., Tolsteneva A.A. Modul'naya ob"ektno-orientirovannaya uchebnaya sreda kak sredstvo organizacii samostoyatel'noj raboty studentov [Modular object-oriented learning environment as a means of organizing students ' independent work]. Innovacii v obrazovanii: Vestnik Nizhegorodskogo universiteta im. N.I. Lobachevskogo [Innovations in education: Bulletin of the Nizhny Novgorod University. N.I. Lobachevsky]. 2013, V. 2, I. 5, pp. 28-32. (in Russian)
4. Bolvako A.K., Bogdan E.O., Dudchik G.P. Opyt provedeniya olimpiady po fizicheskoj himii s ispol'zovaniem sistemy distancionnogo obucheniya BGTU [Experience of conducting the Olympiad in physical chemistry using the BGTU distance learning system]. Trudy BGTU [Proceedings of BSTU]. Minsk: BGTU Publ., 2016, V. 190, I. 8, pp. 131-135.( in Russian)
5. Burkova S.P., Vinokurova G.F., Dolotova R.G. Analiz ispol'zovaniya elektronnogo kursa «Nachertatel'naya geometriya i inzhenernaya grafika» [Analysis of the use of the electronic course " descriptive geometry and engineering graphics»]. Sovremennye problemy nauki i obrazovaniya [Modern problems of science and education]. 2016, I. 3, p. 240. URL: http://science-education.ru/ru/article/view?id=24536. (in Russian)
6. Vajnshtejn U.V., SHershneva V.A., Esin R.V., Zykova T.V. Adaptaciya matematicheskogo obrazovatel'nogo kontenta v elektronnyh obuchayushchih resursah [Adaptation of mathematical educational content in e-learning resources]. Otkrytoe obrazovanie [Open education]. 2017, I. 4, pp. 4-12. DOI:https://doi.org/10.21686/1818-4243-2017-4-4-12. (in Russian)
7. Voloshinov D.V. Edinyj konstruktivnyj algoritm postroeniya fokusov krivyh vtorogo poryadka [Unified constructive algorithm for constructing foci of curves of the second order]. Geometriya i grafika [Geometry and Graphics]. 2018, V. 6, I. 2, pp. 47-54. DOI:https://doi.org/10.12737/article_5b559dc3551f95.26045830. (in Russian)
8. Voloshinov D.V. Ob osobennostyah konstruktivnogo resheniya zadachi o sferah Dandelena [On the features of the constructive solution to the problem of Dandelen spheres]. Geometriya i grafika [Geometry and Graphics]. 2018, V. 6, I. 2, pp. 55-62. DOI:https://doi.org/10.12737/article_5b559f018f85a7.77112269. (in Russian)
9. Voloshinov D.V. Vizual'no-graficheskoe proektirovanie edinoj konstruktivnoj modeli dlya resheniya zadachi Apolloniya s uchetom mnimyh geometricheskih obrazov [Visual and graphic design of a unified structural model for solving the Apollonius problem, taking into account imaginary geometric images]. Geometriya i grafika [Geometry and Graphics]. 2018, V. 6, I. 2, pp. 23-46. DOI:https://doi.org/10.12737/article_5b559c70becf44.21848537. (in Russian)
10. Vol'hin K.A. Sovremennaya inzhenernaya graficheskaya podgotovka studentov stroitel'nogo vuza [Modern engineering graphic training of students of a civil engineering university]. Innovacionnye tekhnologii v inzhenernoj grafike: problemy i perspektivy : sbornik trudov Mezhdunarodnoj nauchno-prakticheskoj konferencii 19 aprelya 2019 goda Brest, Respublika Belarus' Novosibirsk [Innovative technologies in engineering graphics: problems and prospects: collection of proceedings of the International Scientific and Practical Conference April 19, 2019 Brest, Republic of Belarus Novosibirsk, Russian Federation, 2019]. 2019. Available at: http://www.ng.sibstrin.ru/brest_novosibirsk/2019/doc/012.pdf. (in Russian)
11. Vol'hin K.A. Znachenie informacionnyh tekhnologij v inzhenernoj graficheskoj podgotovke studentov stroitel'nogo vuza [The value of information technology in the engineering graphic training of students of a civil engineering university]. DEED BOLOVSROL SETGUUL-018, Dugaar. 2018/01, Ulaanbaatar hot, Mongoliya, 2018, pp.144-147.
12. Vol'hin K.A. Primenenie modul'noj ob"ektivno-orientirovannoj distancionnoj sistemy obucheniya v inzhenernoj graficheskoj podgotovke studenta [Application of a modular objective-oriented distance learning system in the graphic engineering training of a student]. Problemy kachestva graficheskoj podgotovki studentov v tekhnicheskom vuze: problemy, tradicii i innovacii (KGP-2017) Materialy VII mezhdunarodnoj nauchno-prakticheskoj internet-konferencii (fevral'-mart 2017 g.) [Problems of the quality of graphic training of students at a technical university: problems, traditions and innovations (KGP-2017) Materials of the VII international scientific and practical Internet conference (February-March 2017)]. Perm': PNIPU Publ. 2017, V. 1, pp. 195-202. (in Russian)
13. Vol'hin K.A. Ispol'zovanie informacionno-kommunikacionnyh tekhnologij prepodavatelem v processe obucheniya nachertatel'noj geometrii Informatizaciya inzhenernogo obrazovaniya [The use of information and communication technologies by the teacher in the process of teaching descriptive geometry]. INFORINO-2014 (Moskva, 15-16 aprelya 2014 g.) [Informatization of engineering education - INFORINO-2014 (Moscow, April 15-16, 2014)]. Moscow: MEI MEI Publ. 2014, pp. 35-36. (in Russian)
14. Grekov E.O., Fedyshena O.M., Chervonyak T.F. Komp'yuternye tekhnologii sozdaniya testov po nachertatel'noj geometrii [Computer technologies for creating descriptive geometry tests]. Uspekhi sovremennogo estestvoznaniya [The successes of modern natural science]. 2011, I. 7, pp.98-99. Available at: http://natural-sciences.ru/ru/article/view?id=27082. (in Russian)
15. Efremov G.V., Nyukalova S.I. Razrabotka elektronnogo soprovozhdeniya uchebnogo processa kursa «Inzhenernaya i komp'yuternaya grafika» v otkrytoj distancionnoj srede MOODLE [Development of electronic support for the educational process of the course "Engineering and Computer Graphics" in the open distance environment MOODLE]. Problemy kachestva graficheskoj podgotovki studentov v tekhnicheskom vuze v usloviyah FGOS VPO. Materialy Mezhdunarodnoj nauchno-prakticheskoj internet-konferencii. Fevral'-mart 2011 [Problems of the quality of graphic training of students in a technical university in the conditions of the Federal State Educational Standard of Higher Professional Education. Materials of the International Scientific and Practical Internet Conference. February - March 2011]. Perm': Permskij gosudarstvennyj tekhnicheskij universitet Publ. 2011, pp. 180-183. (in Russian)
16. Ignat'ev S.A., Tret'yakova Z.O., Folomkin A.I. Tekhnologii testirovaniya v ocenke predmetnoj gotovnosti studentov k izucheniyu geometro-graficheskih disciplin vuza [Testing technologies in assessing the subject readiness of students for the study of geometric and graphic disciplines of the university]. Geometriya i grafika [Geometry and Graphics]. 2019, V. 7, I. 4, pp. 65-75. DOI: https://doi.org/10.12737/2308-4898-2020-65-75. (in Russian)
17. Kasperov G.I., Kaltygin A.L., Rashchupkin S.V. Izuchenie disciplin kafedry inzhenernoj grafiki s ispol'zovaniem sredstv distancionnogo obucheniya [Study of disciplines of the Department of Engineering Graphics using distance learning tools]. Vysshee tekhnicheskoe obrazovanie [Higher technical education]. Minsk: BGTU Publ. 2018, V. 2, I. 1, pp. 85-90. (in Russian)
18. Kudryavcev D.V. Primenenie instrumentov dlya raboty so znaniyami v obuchenii na osnove resheniya problem: metodologiya i IT-podderzhka [Applying Knowledge Tools to Problem Solving Learning: Methodology and IT Support]. Otkrytoe obrazovanie [Open education]. 2017, I. 3, pp. 57-65. DOI:https://doi.org/10.21686/1818-4243-2017-3-57-65. (in Russian)
19. Meseneva N.V. Plekhanova V. A. K voprosu ispol'zovaniya sredy MOODLE dlya discipliny "Nachertatel'naya geometriya i tekhnicheskij risunok" [On the issue of using the MOODLE environment for the discipline "Descriptive geometry and technical drawing"]. Sovremennye naukoemkie tekhnologii [Modern high technologies]. 2016, V. 1, I. 5, pp. 136-140. (in Russian)
20. Mishukovskaya YU.I. Razvitie tvorcheskogo potenciala studentov v ramkah olimpiady po inzhenernoj i komp'yuternoj grafike [Development of the creative potential of students in the framework of the Olympiad in engineering and computer graphics]. Geometriya i grafika [Geometry and Graphics]. 2020, V. 8, I. 1, pp. 65-72. DOI:https://doi.org/10.12737/2308-4898-2020-65-72. (in Russian)
21. Muhametzyanova F.SH., Gruzkova. S.YU., Hadiullina R.R. Organizaciya vzaimodejstviya sub"ektov obrazovatel'nogo processa pri ispol'zovanii platform distancionnogo obucheniya [Organization of interaction of subjects of the educational process using distance learning platforms]. Otkrytoe obrazovanie [Open education]. 2016, I. 3, pp. 36-42. DOI:https://doi.org/10.21686/1818-4243-2016-3-36-42. (in Russian)
22. Petrova N.V. Primenenie modul'noj ob"ektno-orientirovannoj dinamicheskoj uchebnoj sredy dlya organizacii zaochnogo otborochnogo etapa olimpiady [Application of a modular object-oriented dynamic learning environment for organizing the correspondence qualifying stage of the Olympiad]. Innovacionnye tekhnologii v inzhenernoj grafike: problemy i perspektivy : sbornik trudov Mezhdunarodnoj nauchno-prakticheskoj konferencii 19 aprelya 2019 goda Brest, Respublika Belarus' Novosibirsk, Rossijskaya Federaciya, 2019 [Innovative technologies in engineering graphics: problems and prospects: collection of proceedings of the International Scientific and Practical Conference April 19, 2019 Brest, Republic of Belarus Novosibirsk, Russian Federation, 2019]. Available at: http://www.ng.sibstrin.ru/brest_novosibirsk/2019/doc/049.pdf. (in Russian)
23. Savel'ev YU.A. Babich E.V. Komp'yuternaya metodika izucheniya nachertatel'noj geometrii. Tekhnicheskoe zadanie [Computer technique for studying descriptive geometry. Technical task]. Geometriya i grafika [Geometry and Graphics]. 2018, V. 8, I. 1, pp. 67-74. DOI:https://doi.org/10.12737/article_5ad09d62e8a792.47611365. (in Russian)
24. Sal'kov N.A., Vyshnepol'skij V.I., Aristov V.M., Kulikov V.P. Olimpiady po nachertatel'noj geometrii kak katalizator evristicheskogo myshleniya [Descriptive Geometry Olympiads as a Catalyst for Heuristic Thinking]. Geometriya i grafika [Geometry and Graphics]. 2017, V. 5, I. 2, pp. 93-101. DOI:https://doi.org/10.12737/article_5953f3767b1e80.12067677. (in Russian)
25. Tihonov-bugrov D.E. O vozmozhnosti reabilitacii testov zakrytogo tipa [About the possibility of rehabilitation of closed-type tests]. Sovremennoe obrazovanie: soderzhanie, tekhnologii, kachestvo [Modern education: content, technology, quality]. 2017, V. 2, pp. 72-73. (in Russian)
26. Turutina T.F., Tret'yakov. D.V. Primenenie informacionnyh tekhnologij v metodike proverki graficheskoj gramotnosti budushchih specialistov [The use of information technology in the method of testing the graphic literacy of future specialists]. Geometriya i grafika [Geometry and Graphics]. 2020, V. 8, I. 1. pp. 45-56. DOI:https://doi.org/10.12737/2308-4898-2020-45-56. (in Russian)
27. Usataya T.V., Derbeneva L.V., Reshetnikova E.S. Sovremennye podhody k proektirovaniyu izdelij v processe obucheniya studentov komp'yuternoj grafike [Modern approaches to product design in the process of teaching students computer graphics]. Geometriya i grafika [Geometry and Graphics]. 2019, V. 7, I. 1, pp. 74-82. DOI:https://doi.org/10.12737/article_5c91fd2bde0ff7.07282102. (in Russian)
28. Fedoseeva M.A. Metodika podgotovki studentov tekhnicheskih vuzov graficheskim disciplinam [Methods of training students of technical universities in graphic disciplines]. Geometriya i grafika [Geometry and Graphics]. 2019, V. 7, I. 1, pp. 68-73. DOI:https://doi.org/10.12737/article_5c91fed8650bb7.79232969. (in Russian)
29. Halueva V.V, Hamitova D.V., Krajnova M.N. Razrabotka kursov graficheskih disciplin na osnove sistemy distancionnogo obucheniya Moodle [Development of courses in graphic disciplines based on the Moodle distance learning system]. Organizaciya sistemy distancionnogo obucheniya roblemy kachestva graficheskoj podgotovki studentov v tekhnicheskom vuze: tradicii i innovacii. Materialy IV Mezhdunarodnoj nauchno-prakticheskoj internet-konferencii. Fevral'-mart 2014 [Organization of the distance learning system of the problem of the quality of graphic training of students in a technical university: traditions and innovations. Materials of the IV International Scientific and Practical Internet Conference. February - March 2014]. Perm': Permskij nacional'nyj issledovatel'skij politekhnicheskij universitet Publ. Available at: http://dgng.pstu.ru/conf2014/papers/100. (in Russian)
30. Affouneh S., Wimpenny K., Ghodieh A.R., Alsaud L.A., Obaid A.A., Reflection on MOOC Design in Palestine.The International Review of Research in Open and Distributed Learning. 2018, V. 2, I. 19. DOI:https://doi.org/10.19173/irrodl.v19i2.3469.
31. Ahn, J.Y., Edwin A. An e-Learning Model for Teaching Mathematics on an Open Source Learning Platform. The International Review of Research in Open and Distributed Learning. 2018, V. 5, I. 19. DOI:https://doi.org/10.19173/irrodl.v19i5.3733.
32. Gitman E.K., Danilov A.N., Stolbova I.D. Assessment of openness of educational system of the university on the basis of synergetic approach. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstilnoi Promyshlennosti [Electronic resource]. 2017, I. 2, pp. 321-327. - https://www.scopus.com/sourceid/57620?origin=resultslist.
33. Joo KP. Shearer C. Promoting distance learners’ cognitive engagement and learning outcomes: Design-based research in the Costa Rican National University of Distance Education The International Review of Research in Open and Distributed Learning. 2014, V. 6, I. 15, DOI:https://doi.org/10.19173/irrodl.v15i6.1908.
34. Stolbova I.D., Aleksandrova E.P., Nosov K.G. Adaptation of Polytechnical Education to Industrial Production. IOP Conference Series: Earth and Environmental Science. 2019. V. l. DOIhttps://doi.org/10.1088/1755-1315/272/3/032120.
35. Stolbova I.D. Aleksandrova E.P., Kochurova L.V., Nosov K.G. Profile aspects of graphic education at polytechnic university VyssheeObrazovanie v Rossii. 2019, V. 28, I. 3, pp. 155-166. DOI:https://doi.org/10.31992/0869-3617-2019-28-3.
36. Stolbova I.D., Aleksandrova E.P., Krainova M.N., Varuskin V.P. Updating the graphic education of construction students VyssheeObrazovanie v Rossii. 2018, V. 27, I. 3, pp. 153-162.
37. Stolbova I.D., Gitman Y.K., Ovchinnikov A.A. Integration of content and technologies of teaching within framework of geometrical-graphic training of students. IOP Conference Series: Materials Science and Engineering. 2018, V. 451, p.6. DOI:https://doi.org/10.1088/1757-899X/451/1/012117.
38. Stolbova I.D., Shakhova A.B., Shirinkina M.A. Information Technologies Used for Geometro-grafical Training of Engineering Staff. Information Technologies in Engineering Education - INFORINO 2018 [Electronic resource]: IV Intern. Conf., 23-26 Oct. 2018, Moscow, Russia / Moscow Power Engineering Inst. - Moscow: [s. n.]. 2018, pp. 53-56, DOI:https://doi.org/10.1109/INFORINO.2018.8581807.
39. Volkhin K.A. Value of Information Technologies in Engineering Graphic Training of The Student of Construction Higher Education Institution. JOURNAL OF HIGHER EDUCATION-2018, Ulaanbaatar, Mongolia. 2018, V. 308, pp.144-147.
40. Wang M., Chen Y., Khan, MJ. Mobile cloud learning for higher education: A case study of Moodle in the cloud The International Review of Research in Open and Distributed Learning. 2014, V. 2, I. 15. DOI:https://doi.org/10.19173/irrodl.v15i2.1676.
