from 01.03.2009 to 27.11.2017
Abakan, Abakan, Russian Federation
from 01.09.2010 to 27.11.2017
Abakan, Abakan, Russian Federation
UDK 51 Математика
The quality of university students’ graphic training should meet modern requirements to design and development execution and design drafting. The role of students’ tools training for wide use of CAD systems in solving of learning problems and execution of project tasks is increasing. It meets modern requirements to designer’s professional activity. The lack of clear and accurate originals for construction of views, sections, schemes and tabular materials, as well as use of hand work and the counterfeit automated software products, are current problems for graphics culture in the field of hydrotechnical design because significantly reduce labor productivity, quality of drawing’s performance and use. The authors offer a novel approach to formation of graphics culture in future engineers in the field of hydrotechnical construction. In this paper the possibilities of the AutoCAD system, mainly as a tool for performance of a wide range of engineering graphics tasks of any complexity when developing drawings for hydraulic engineering constructions have been considered, including: • search and analysis of layout solutions. By using AutoCAD system in its simplest, basic version, one can both analyze configuration of huge structures with accuracy up to 0,001 m and design drawings for more sizeable objects, such as plants, hydroelectric power stations, conglomerations; • design drawings of any subject and complexity. The basic version’s possibilities are quite enough to convert obtained layout solutions into high-quality project documentation that meets the requirements of domestic design standards; • design development for work execution – even without a digitized basis; • construction of loading schemes and stresses epures; • construction of graphs and diagrams. Sequential approach to formation of graphics culture will allow realize a united learning task on engineering and computer graphics for aiding in solution such important task as providing of combination for manual and computer-aided drawing when getting students’ education in graphics courses.
hydraulic engineering graphics; computer-aided design; engineering graphics; graphic culture; hydrotechnical construction.
Введение
В настоящее время рынок труда требует от выпускника вуза высокой профессиональной мобильности, активной жизненной позиции.
1. Aleksandrova E.P. Innovatsionnye podkhody pri obuchenii geometricheskomu modelirovaniyu [Innovative approaches to teaching geometric modeling]. Materialy mezhdunarodnoy nauchno-prakticheskoy internet-konferentsii [Materials of the international scientific and practical Internet conference]. Perm', PNIPU Publ., 2014. Available at: http://dgng.pstu.ru/conf2014/
2. Al'shakova E.L. Primenenie informatsionnykh tekhnologiy v uchebnom protsesse na kafedre nachertatel'noy geometrii i inzhenernoy grafiki [Application of information technologies in the educational process at the Department of Descriptive Geometry and Engineering Graphics]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 1, pp. 42-46. (in Russian)
3. Astashov A.M. K voprosu ob aktual'nykh problemakh graficheskogo komp'yuternogo obrazovaniya [On the issue of topical problems of graphic computer education]. Vestnik MGU [Vestnik MGU]. 2008, I. 4. Available at: http:// cyberleninka.ru/article/n/k-voprosu-ob-aktualnyh-problemah-graficheskogo-kompyuternogo-obrazovaniya (accessed 23 November 2017).
4. Brykova L.V. Formirovanie graficheskoy kul'tury studentov tekhnicheskogo vuza v protsesse professional'noy podgotovki [The formation of graphic culture of students of a technical college in the process of professional training]. Moscow, 2012. Available at: www.dissers.ru
5. Vel'tishchev V.V. 3D-olimpiady i komp'yuternoe proektirovanie v programmakh tekhnicheskikh universitetov [3D-Olympiads and computer designing in the programs of technical universities]. Geometriya i grafika [Geometry and Graphics]. 2015, V. 3, I. 2, pp. 52-59. (in Russian)
6. Volkova M.Yu. Graficheskaya gramotnost' kak sposob polucheniya fundamental'nykh professional'nykh znaniy [Graphic literacy as a way of obtaining fundamental professional knowledge]. Geometriya i grafika [Geometry and Graphics]. 2014, V. 2, I. 1, pp. 53-57. (in Russian)
7. Vol'khin K.A. Problemy graficheskoy podgotovki studentov tekhnicheskogo universiteta [Problems of graphic preparation of students of a technical university]. Geometriya i grafika [Geometry and Graphics]. 2014, I. 2, pp. 24-28. (in Russian)
8. Vyshnepol'skiy V.I. Tseli i metody obucheniya graficheskim distsiplinam [Goals and methods of teaching graphic disciplines]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 2, pp. 8-9. (in Russian)
9. Gornov A.O. Bazovaya inzhenernaya geometro-graficheskaya podgotovka na osnove 3D-modelirovaniya [Basic engineering geometry-graphical preparation on the basis of 3D-modeling]. Problemy kachestva graficheskoy podgotovki v usloviyakh FGOS VPO: Materialy mezhdunarodnoy nauchno-prakticheskoy internet-konferentsii [Problems of the quality of graphic training in the conditions of GEF HPE: Proceedings of the international scientific and practical Internet conference]. Perm', PNIPU Publ., 2014. Available at: http://dgng.pstu.ru/conf2014/
10. Guzenkov V.N. Informatsionnye tekhnologii v graficheskikh distsiplinakh tekhnicheskogo universiteta [Information technologies in graphic disciplines of the technical university]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 3-4, pp. 26-28. (in Russian)
11. Ertskina E.B. Geometricheskoe modelirovanie v avtomatizirovannom proektirovanii arkhitekturnykh ob"ektov [Geometric modeling in the automated design of architectural objects]. Geometriya i grafika [Geometry and Graphics]. 2016, V. 1, I. 2, pp. 48-54. (in Russian)
12. Ivanov G.S. Perspektivy nachertatel'noy geometrii kak uchebnoy distsipliny [Perspectives of descriptive geometry as a discipline]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 1, pp. 26-27. (in Russian)
13. Korotkiy V.A. Nachertatel'naya geometriya na ekrane komp'yuteram [Descriptive geometry on the computer screen]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 1, pp. 32-34. (in Russian)
14. Mysishin, I.S. Professional'naya podgotovka bakalavrov po napravleniyu «stroitel'stvo» dlya agropromyshlennogo kompleksa na osnove primeneniya kompleksnoy sistemy obucheniya spetsial'nym distsiplinam [Professional training of bachelors in the field of "construction" for the agro-industrial complex on the basis of the application of an integrated system of training to special disciplines]. Orel, FGBOU VO Orlovskiy GAU Publ., 2015. 160 p. (in Russian)
15. Novozhilova S.A. Informatsionnoe obespechenie v sovremennykh tekhnologiyakh obucheniya graficheskim distsiplinam [Information support in modern technologies of teaching graphic disciplines]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 3-4, pp. 33-35. (in Russian)
16. Parvulyusov Yu.B. Primenenie komp'yuternoy grafiki prikursovom proektirovanii opticheskikh priborov [Application of computer graphics in the course design of optical instruments]. Geometriya i grafika [Geometry and Graphics]. 2014, V. 2, I. 1, pp. 42-45. (in Russian)
17. Sal'kov N.A. Nachertatel'naya geometriya - baza dlya komp'yuternoy grafiki [Descriptive geometry - base for computer graphics]. Geometriya i grafika [Geometry and Graphics]. 2016, V. 4, I. 2, pp. 37- 47. (in Russian)
18. Seregin V.I. Mezhdistsiplinarnye svyazi nachertatel'noy geometrii i smezhnykh razdelov vysshey matematiki [Interdisciplinary connections of descriptive geometry and related sections of higher mathematics]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 3-4, pp. 8-12. (in Russian)
19. Stolbova I.D. Funktsional informatsionnykh tekhnologiy v geometro-graficheskoy podgotovke inzhenera [Functional of Information Technologies in Geometrical Engineer Training]. Otkrytoe obrazovanie [Open Education]. 2017, I. 1, pp. 59-67. (in Russian)
20. Stolbova I.D. Kachestvo graficheskoy podgotovki studentov tekhnicheskikh VUZov v sootvetstvii s sovremennym sostoyaniem edinoy sistemy konstruktorskoy dokumentatsii [The quality of graphic preparation of students of technical universities in accordance with the current state of a unified system of design documentation]. Geometriya i grafika [Geometry and Graphics]. 2014, V. 2, I. 2, pp. 27-31. (in Russian)
21. Storozhilov A.I. Inzhenernaya grafika na komp'yutere [Engineering graphics on the computer]. Minsk, BNTU Publ., 2014. 152 p. (in Russian)
22. Tikhonov-Bugrov D.E. O nekotorykh problemakh graficheskoy podgotovki v tekhnicheskikh VUZakh (vzglyad iz Peterburga) [On some problems of graphic training in technical universities (view from St. Petersburg)]. Geometriya i grafika [Geometry and Graphics]. 2014, V. 2, I. 1, pp. 46-52. (in Russian)
23. Usanova E.V. Kompleksnoe primenenie media-tekhnologiy i CAD-sistem v geometro-graficheskoy podgotovke studentov [Complex application of media technologies and CAD-systems in the students' geometrical-graphic preparation]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 1, pp. 63-67. (in Russian)
24. Usova, N.A. Graficheskaya kul'tura v protsesse obucheniya informatike studentov pedagogicheskogo vuza [Graphic culture in the process of teaching computer science to students of a pedagogical university]. Vestnik RUDN seriya «Informatizatsiya obrazovaniya» [Bulletin of the PFUR series "Informatization of education"]. 2010, I. 2. Available at: http://cis.rudn.ru/doc/15307.
25. Fokina N.I. Poisk effektivnoy metodicheskoy sistemy obucheniya studentov komp'yuternoy grafike [Search for an effective methodical system for teaching students computer graphics]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 1, pp. 68-69. (in Russian)
26. Kheyfets A.L. Kurs komp'yuternoy grafiki dlya studentov stroitel'nykh spetsial'nostey [Course of computer graphics for students of construction specialties]. Geometriya i grafika [Geometry and Graphics]. 2015, V. 3, I. 1, pp. 31-39. (in Russian)
27. Shcheglova A.V. Primenenie komp'yuternykh tekhnologiy v protsesse izucheniya graficheskikh distsiplin [Application of computer technologies in the process of studying graphic disciplines]. Geometriya i grafika [Geometry and Graphics]. 2013, V. 1, I. 1, pp. 73-74. (in Russian)
28. Yumatova E.G. Geometro-graficheskaya kul'tura - sistemoobrazuyushchiy faktor innovatsionnoy obrazovatel'noy sredy inzhenernogo vuza [Geometrical-graphic culture - a system-forming factor of the innovative educational environment of an engineering university]. Sovremennye problemy nauki i obrazovaniya [Modern problems of science and education]. 2016, I. 4. Available at: https://science-education.ru /ru/article/view?id=24920 (accessed 19 October 2017).
29. Yaroshevich O.V. Rezervy sovershenstvovaniya geometro-graficheskoy podgotovki sovremennogo inzhenera [Reserves for improving the geometric-graphic preparation of a modern engineer]. Geometriya i grafika [Geometry and Graphics]. 2014, V. 2, I. 2, pp. 37-42. (in Russian)
