The method and results of the study of reverse extrusion of billet by cylindrical punch in a conical expanding matrix are described. The mathematical model, which we developed for the determination of specific extrusion force, is described too. The study by statistical method verified the adequacy of the model. This model made possible to assess the resistance of punches and showed the ability to produce deformation of a billet made of low carbon steel without heating. The developed process includes the operation of segmenting of the cylindrical workpieces from bar, heat treatment, lubrication and extrusion of the workpieces. The two-way cold extrusion of a billet is produced in a matrix alternatively by two punches. The design of the stamp is described. The stamp is specialized for reverse extrusion of a billet. In its construction the moving mechanism of action of the two alternately punches in one matrix is used.
parts of the type of cup with a flange, outer expanding conical surface, inner cylinder surface, low carbon steel, cold two-way extrusion in single matrix, stamp for cold extrusion.
1. Dmitriev A.M., Demin V.A. Modern competitive tech-nologies, equipment and fitment at production workpieces by plastic working. Handbook. An engineering journal. 2011. No 5. Pp. 34-38.
2. Grigor’ev S.N., Dmitriev A.M., Korobova N.V. Mechanical characteristics of construction carbon steels at cold die forging and their description by approximate dependences. Handbook. An engineering journal. 2011. No 12. Pp. 23-26.
3. Dmitriev A.M., Korobova N.V. Expansion of application field of cold die forging by creation of active forces of contact friction. Friction and wear. 2013. No 3. Pp. 306-314.
4. Dmitriev A.M., Korobova N.V., Tolmachev N.S. Experimental verification of results of computer simulation of stresses on element of deforming tool. Vestnik of MSTU “Stankin”. 2014. No 2(29). Pp. 44-49.
5. Practical application of changing mechanical properties of construction steels at cold die forging. A.M. Dmitriev, F.V. Grechnikov, N.V. Korobova, N.S. Tolmachev. Vestnik of MSTU “Stankin”. 2014. No. 4(31). Pp. 41-44.
6. AksenenkoA.Yu., Korobova N.V., Dmitriev A.M. Analysis of various methods of development of production of box-like parts by combined extrusion. Computer research and simulation. 2014. V. 26. No 6. Pp. 967-974.
7. Forging and die forging: handbook. In 4 v. V. 3. Cold die forging. Forging of metallic powders.ed. by A.M. Dmitriev; general editorship by E.I. Semenov. Moscow: Mashinostroenie. 2010. 352 p.
8. Science intensive technologies in mechanical engineering. A.G. Suslov, B.M. Bazrov, V.F. Bezyazichniy et al.; ed. by A.G. Suslov. Moscow: Mashinostroenie, 2012. 528 p.
9. Press-forging equipment. P.2. Selection of technological parameters for specialized equipment: textbook. A.M. Dmitriev, F.V. Grechnikov, N.V. Korobova. Samara: SSTU publishers, 2015. 168 p.
