Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Journals Monographies Textbooks Collections Authors
Submit manuscript
Geometry & Graphics
UDC 514

ABOUT GEOMETRIC BASIS OF DESIGNING A TECHNICAL OBJECT About Geometric Basis of Designing a Technical Object

Published in Geometry & Graphics · Volume 11, Issue 4 · Pages 3–14 · Rubric: Scientific problems of geometry
DOI: https://doi.org/10.12737/2308-4898-2024-11-4-3-14
Received: 04.12.2023 Accepted: 06.12.2023 Published: 12.03.2024
Authors
M.
M. Leparov
ABSTRACT
The purpose of the article is to propose basic statements (a conditional general name for law, regularity, principle and rule) about the geometry of technical objects and about the process of their design, which, together with existing and future statements, form the geometric foundations of design. 26 statements are presented and a classification, functions and properties of geometry are proposed from the point of view of distribution and the importance of the latter for the technical object and the design process.In their entirety, the presented statements are proof of the importance and influence of geometry in the design process. The work substantiates the possibility of obtaining partially or completely the geometry of any other part or assembled unit, conditionally called a recipient, from any part or assembled unit, conditionally called a donor. It is shown that any “item” (a term for naming anything, regardless of type, structures and characteristics) can be used to change the geometry of any technical object. The impact of the geometry on the flowing through and passing through the substance, the influence of the flows on the geometry, as well as the influence of the geometry on the properties of the substance are noted. It is emphasized that geometry is a fundamental „building block“ of both the technical object and the design process. The well-deserved placement of geometry at the center of the design activity gives a new perspective on the design process, which expands the possibilities and tools for its realization.
KEYWORDS
geometry, technical object, design, importance of geometry, statements about geometry
Text References
Text
Text (PDF)
Read Download

1. Anur'ev V.I. Spravochnik konstruktora-mashinostroitelya [Tekst]. V 3 t. T. 1-3 / V.I. Anur'ev; pod. red. I.N.Zhestkovoy. - 9-e izd., pererab. i dop. - M.: Mashinostroenie-1, 2006. - T. 1. - 928 s., T. 2. - 960 s., T. 3. - 928 s. EDN: https://elibrary.ru/QNBHKR

2. GOST 2.102-2013 ESKD. Vidy i komplektnost' konstruktorskih dokumentov [Tekst] / GOST 2.102-2013. M.: Standartinform, 2014. - 12 s.

3. GOST 2.103-2013 ESKD. Stadii razrabotki [Tekst] / GOST 2.103-2013. - M.: Standartinform, 2013. - 6 s.

4. Zhdanov L.S. Fizika [Tekst] / L.S. Zhdanov, G.L. Zhdanov. - M.: Nauka, 1987. - 512 s.

5. Zaripov M.F. Energoinformacionnyy metod nauchno-tehnicheskogo tvorchestva [Tekst] / M.F. Zaripov, N.R. Zaynullin, I.Yu. Petrova. - M.: Izd-vo VNIIPI, 1988. - 124 s.

6. Leparov M.N. Geometricheskie preobrazovaniya sborochnyh edinic [Tekst] / M.N. Leparov // Geometriya i grafika. - 2016. - T. 4. - № 3. - S. 62-72. DOI: https://doi.org/10.12737/21535; EDN: https://elibrary.ru/WMHZCV

7. Leparov M.N. Nyakoi osnovni tv'rdeniya za procesa na proektirane na tehnicheski obekti [Tekst] / M.N. Leparov // Sbornik dokladi ot 21 mezhdunarodna nauchno-tehn. konf. «Avtomatizaciya na diskretnoto proizvodstvo» ADP 2012. - Sozopol. - 2012. - S. 58-63.

8. Leparov M.N. O geometrii, esche odin raz [Tekst] / M.N. Leparov // Geometriya i grafika. - 2022. - T. 10. № 1. - S. 3-13. - DOI:https://doi.org/10.12737/2308-4898-2022-10-13-13. DOI: https://doi.org/10.12737/2308-4898-2022-10-1-3-13; EDN: https://elibrary.ru/ROPUTY

9. Leparov M.N. O nauke «Geometriya tehnicheskih ob'ektov» [Tekst] / M.N. Leparov // Geometriya i grafika. 2019. - T. 7. - № 2. - S. 28-38. - DOI:https://doi.org/10.12737/article _5d2c187251b6c8.21632403. DOI: https://doi.org/10.12737/article_5d2c187251b6c8.21632403; EDN: https://elibrary.ru/CFHAMF

10. Leparov M.N. Osnovi na inzhenernoto proektirane [Tekst] / M. Leparov, M. Vicheva, M. Georgiev. - 3-e izd., pererab. i dop. - Sofiya: Softtreyd, 2015. - 360 s.

11. Leparov M.N. Otnosno presmyataniyata v procesa na proektirane na tehnicheski obekti [Tekst] / M.N.Leparov // B'lgarsko spisanie za inzhenerno proektirane. 2011. - № 9. - S. 45-57.

12. Leparov M.N. Tv'rdeniya v teoriyata na evristichnoto proektirane [Tekst] / M. Leparov // B'lgarsko spisanie za inzhenerno proektirane. - 2010. - № 5. - S. 77-88.

13. Leparov M.N. Tehnologiya «Druga gledna tochka» pri proektirane na tehnicheski obekt.Ch.1. Tv'rdeniya [Tekst] / M.N. Leparov // B'lgarsko spisanie za inzhenerno proektirane. - 2023. - № 46. - S. 42-50.

14. Leparov M.N. Tehnologiya «Sistematizaciya na element» za proektirane na tehnicheski obekt [Tekst] / M.N.Leparov // B'lgarsko spisanie za inzhenerno proektirane. - 2022. - № 45. - S. 11-17.

15. Leparov M.N. Evristichnyy podhod pri formirovanii utverzhdeniy v tehnetike [Tekst] / M.N. Leparov, M.H. Popov // Tehnetika i simeotika, Cenologicheskie issledovaniya. - M.: Centr sistemnyh issledovaniy. 2012. - Vyp. 46. - S. 45-50.

16. Matematicheskiy enciklopedicheskiy slovar' [Tekst] / Gl. red. Yu.V. Prohorov - M.: Sov. enciklopediya, 1988. 847 s.

17. Orlov P.I. Osnovy konstruirovaniya [Tekst]: V 2 kn.: spravochno- metodicheskoe posobie / P.I. Orlov, pod red. P.N. Uchaeva. - 3-e izd. ispr. - M.: Mashinostroenie, 1988. - Kn. 1. - 560 s., Kn. 2. - 544 s.

18. Orloev N.A. Metodicheski osnovi na konstruiraneto.Pravila i principi [Tekst] / N.A. Orloev. - Ruse: VTU «A. K'nchev», 1986. - 331 s.

19. Polovinkin A.I. Zakony stroeniya i razvitiya tehniki [Tekst] / A.I. Polovinkin. - Volgograd: Izd-vo VolgPI, 1985. - 202 s.

20. Polovinkin A.I. Osnovy inzhenernogo tvorchestva [Tekst] / A.I. Polovinkin. - SPb.: Lan', 2007. - 368 s. EDN: https://elibrary.ru/QMFTEX

21. Popov M.H. Terminologicheskiy slovar' po tehnetike [Tekst] / M.H. Popov. - M.: Tehnetika, 2009. - 392 s. EDN: https://elibrary.ru/QMGNPR

22. Suleymanov N.T. Velichiny i parametry opticheskih cepey [Elektronnyy resurs]: Konf. Effektivnye instrumenty sovremennyh nauk, 2012. - URL: http://www.rusnauka.com/13_EISN_2012/Phisica/7_103459.doc.htm (data obrascheniya: 19.09.2023).

23. Fizicheskaya enciklopediya [Tekst]. V 5 t. T. 2. / gl. red. A.M. Prohorov. - M.: Sovetskaya enciklopediya, 1990. - 704 s.

24. Filosofskiy enciklopedicheskiy slovar' [Tekst] / gl. red. L.F. Il'ichev. - M.: Sovetskaya enciklopediya, 1983. - 840 s.

25. Himicheskaya enciklopediya [Tekst]. V 5 t. T. 1 / gl.red. I.L. Knunyanc. - M.: Sovetskaya enciklopediya, 1988. 625 s.

26. Yakovlev A.A. Inzhenerno-fizicheskiy metod sinteza tehnicheskih resheniy preobrazovateley energii [Tekst]: avtoref. dis. …. d-ra tehn. nauk / A.A. Yakovlev. - Volgograd: Izd-vo Volg. gos. tehn. universiteta, 2008. - 347 s. EDN: https://elibrary.ru/NKNCDN

27. Koller R. Konstruktionsmethode für den Maschinen-Geräteund apparatebau. Berlin: Springer-Verlag, 1976. 191 r.

28. Leparov M. Method “Conversion of any Random Technical Object” for Conceptual Design of Technical Objects. Journal of International Scientific Publications: Materials, Methods&Technologies. 2013, V. 7, I. 3, pp. 137-159.

29. Otto K., Wood K. Product Design. Techniques in Engineering and New Product Development, NJ, Prentice Hall, 2001. 1065 r.

30. Pahl G., Beitz W., Feldhusen J., Grote K.H. Engineering Design. A Systematic Approach, Springer-Verlag Berlin, 2007. 617 r.

31. Tomiyama T., Gu P., Jin Y., Lutters D., Kind C., Kimura F. Design methodologies: Industrial and educational applications. CIRP Annals - Manufacturing Technology. 2009, 58, pp. 543-565.

PDF JATS XML
The contact persons
Zamestitel' glavnogo redaktora, chlen redsoveta
Vladimir Vyshnyepolskiy
Glavnyy redaktor
A. A. Ishchenko
Vypuskayuschiy redaktor
Dar'ya Sklyankina
501@infra-m.ru
Deputy editor-in-chief, member of the editorial Board
N. Sal'kov
nikolaysalkov@mail.ru
2801
downloads
RINC
© INFRA-M
Agreement Personal data protection and processing policy Support Powered by Editorum, 2026 Instructions
Login or Create
* Forgot your password?