UDC 621.7

AN ARRAY OF QUESTIONS RELATED TO NEW TECHNOLOGIES FOR MANUFACTURING NON-RIGID THIN-SHELL FLAT PARTS MADE OF AIRCRAFT MATERIALS IS VIEWED. TO REDUCE POSSIBLE DEFORMATIONS AND IMPROVE THE QUALITY, IT HAS BEEN SUGGESTED THAT THE ENERGY OF A MODULATED ULTRASONIC FIELD SHOULD BE USED An array of questions related to new technologies for manufacturing non-rigid thin-shell flat parts made of aircraft materials is viewed. To reduce possible deformations and improve the quality, it has been suggested that the energy of a modulated ultrasonic field should be used

Published in Science intensive technologies in mechanical engineering · Volume 2022, Issue 9 · Pages 10–17 · Rubric: Technologies of mechanical processing of workpieces
DOI: https://doi.org/10.30987/2223-4608-2022-9-10-17
Received: 26.09.2022 Accepted: 30.09.2022 Published: 30.09.2022
An array of questions related to new technologies for manufacturing non-rigid thin-shell flat parts made of aircraft materials is viewed. To reduce possible deformations and improve the quality, it has been suggested that the energy of a modulated ultrasonic field should be used
non-rigid parts, modulated ultrasonocs, titanium and aluminium alloys
Text References
Text (PDF)
Read Download

1. Khramov, A., Semdyankin, I., Kiselev, E. Application of the Modern Stationary Workholding Systems for Increase Capacity and Quality of Non-Rigid Aircraft Parts/ Matec web of Conferences 346, 03076 (2021) ICMTMTE 2021.

2. Available at: https://haltec.bitrix24.ru/~eluYV. (Accessed 4 april 2022)

3. Kiselev E.S., Kovalnogov V.N. Mekhanicheskaya obrabotka zagotovok v usloviyakh kriticheskogo teplomassoperenosa [Machining of workpieces in conditions of critical heat and mass transfer]. Moscow: Russian Academy of Sciences Publ., 2008, 250 p. ( in Russian).

4. Kiselev E.S. Modern ultrasonic dimensional technologies for machining workpieces from difficult-to-machine and composite materials. / Science-intensive technologies in mechanical engineering, 2020, no. 9 (111), pp.33-39.

5. Markov A.I. Ultrazvukovaya obrabotka materialov [Ultrasonic processing of materials]. Moscow: Mashinostroenie Publ., 1980. 237 p. (in Russian).

6. Nerubai M. S., Shtrikov B. L., Kalashnikov V. V., Ul’trazvukovaia mekhanicheskaia. obrabotka i sborka [The ultrasonic machining and assembly], Samara Book Publ., Samara, 1995, 190 p. (in Russian).

7. ULTRASONIC 20 linear- ULTRASONIC DMG MORI machines, available at: http://sistem.ru/netcat_files/multifile/2295/pugru13_ultrasonic_pdf_data.pdf (Accessed 26 february 2022).

8. ULTRASONIC Series, available at: http://sistem.ru/netcat_files/multifile/2295/pugru13_ultrasonic_pdf_data.pdf (Accessed 27 february 2022).

9. Kiselev, E.S., Blagovsky, O.V. Upravlenie formirovaniem ostatochnikh napryazhenii pri izgotovlenii otvetstvennikh detaley. Monografiya. [Controlling the formation of residual stresses in the manufacture of critical parts. Monography]. St. Petersburg: Lan, 2020, 140 p. (in Russian).