OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS  AND CLEARED FELLING

S. Bubnov; Sergey Malyukov; A. Aksenov

doi:10.34220/2308-8877-2020-8-1-29-34

UDC 63

OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING

Published in Actual directions of scientific researches of the XXI century: theory and practice · Volume 8, Issue 1 · Pages 29–34 · Rubric: MODERN FORESTRY TECHNOLOGIES AND FOREST EXPLOITATION

DOI: https://doi.org/10.34220/2308-8877-2020-8-1-29-34

Received: 18.03.2020 Accepted: 24.03.2024

Authors

S. Bubnov

Sergey Malyukov

A. Aksenov

S. Bubnov

Voronezh State University of Forestry and Technologies named after G.F. Morozov Voronezh

Sergey Malyukov

Academic degree: candidate of technical sciences

Voronezh State University of Forestry and Technologies docent · mehanizacii lesnogo hozyaystva i proektirovaniya mashin · Russian Federation

A. Aksenov

Voronezhskiy gosudarstvennyy lesotehnicheskiy universitet imeni G.F. Morozova Russian Federation

ABSTRACT

Reforestation is the main, priority task of the modern forest complex. Natural forest regeneration has long been considered a priority. Natural regeneration, as a way of reforestation, has a number of significant drawbacks. Firstly, the natural regeneration of forests in burned areas and deforestation does not occur immediately after deforestation, but over a fairly long time ̶ reforestation period, during which various unfavorable processes ̶ soil erosion, sodding develop on an unforested area. Secondly, natural renewal quite often leads to a change of species, i.e. desired valuable breeds do not grow. As a result, the territory is overgrown with minor soft-leaved species that have low economic value. Mechanized landing, i.e. artificial reforestation, also has a number of disadvantages. Therefore, planting operations carried out under various conditions are the most labor-intensive and responsible operations. The technological process of planting seedlings and seedlings of various tree species with both open and closed root systems is presented. The analysis of existing designs of forest planting machines for open areas, fires and clearings is carried out. Deficiencies were identified that affect the quality of the planting process and reduce the survival rate of planted seedlings and seedlings.

KEYWORDS

tree-planting machine, reforestation, seedlings, opener

Text

ВВЕДЕНИЕ

Леса занимают около 30 % территории земной суши, являясь самыми ценными естественными природными ресурсами из всех типов растительного покрова на планете. Леса являются центральным звеном сохранения природы, позволяют регулировать большинство протекающих в ней процессов. Лес это природная основа, которая способствует выживанию человечества [1].

В настоящее время наблюдается резкое сокращение площади лесов на планете, вызванное как природными катаклизмами, так и человеческим фактором. Поэтому основной задачей государственного управления в сфере производства лесов является обеспечение баланса темпов выбытия и восстановления лесов [2, 3].

1. Bartenev I.M. Tehnologiya i mehanizaciya lesohozyaystvennyh rabot [Tekst]: uchebnoe posobie / I.M. Bartenev, M.V. Drapalyuk, P.E. Goncharov, S.V. Dorohin, V.A. Smirnov; Fed. agenstvo po obrazovaniyu, GOU VPO «VGLTA». - Voronezh, 2010. - 136 s.

2. Bartenev, I. M. Raschet i proektirovanie lesohozyaystvennyh mashin [Tekst] : ucheb. posobie / I. M. Bartenev; GOU VPO «VGLTA» - Voronezh, 2010. - 339 s.

3. Bartenev, I. M. Komponovochnye shemy i parametry lesoposadochnyh mashin [Tekst] / I. M. Bartenev, P. I. Titov, M. V. Shavkov // Lesnoe hozyaystvo. - 2012. - № 3. - s. 45-47.

4. Bartenev, I. M. Novaya konstrukciya lesoposadochnoy mashiny [Tekst] / I. M. Bartenev, M. V. Shavkov // Traktory i sel'hozmashiny. - 2012. - № 6. - s. 22-24.

5. Vinokurov, V.N. Mashiny i mehanizmy lesnogo hozyaystva i sadovo-parkovogo stroitel'stva [Tekst] : ucheb./ V.N. Vinokurov, G.V. Silaev, A.A. Zolotarevskiy. - M. : Akademiya, 2004. - 400 s.

6. Titov, P. I. Sovershenstvovanie tehnologicheskogo processa i konstrukcii lesoposadochnoy mashiny dlya pitomnikov [Tekst] : dis. … kand. tehn. nauk: 05.21.01 / P.I Titov. - Voronezh, 2006. - 151 s.

7. Shavkov, M. V. Tree planter design improvement [Tekst] / M. V. Shavkov, N. I. Bazarskaya // Lesotehnicheskiy zhurnal. - Voronezh, 2011. - № 3. - s. 175-178.

8. Czupy, I. Operation of energy wood plantation with special regard to harvesting technology and timber logistics / I. Czupy, K.S. Mátyás, A.L. Horváth, B. Horváth, S. Beszédes, A. Vágvölgyi, // IOP Conference Series: Earth and Environmental Science. - 2019. - 307 (1). - № 012009. - DOI:https://doi.org/10.1088/1755-1315/307/1/012009

9. Triyanto, Y. Palm oil prediction production using extreme learning machine / Y. Triyanto, R. Watrianthos, Pristiyono, Y. Sepriani, K. Rizal // International Journal of Scientific and Technology Research. - 2019. - 8 (8). - pp. 1070-1072.

10. Nourani, A. Design of a portable dates cluster harvesting machine / A. Nourani, F. Kaci, F. Garbati Pegna, A. Kadri // AMA, Agricultural Mechanization in Asia, Africa and Latin America. - 2017. - 48 (1). - pp. 18-21.

This work is licensed under Creative Commons Attribution 4.0 International

JATS XML

Responsible secretary

Igor Shanin

kingoao@mail.ru

This work is licensed under Creative Commons Attribution 4.0 International Creative Commons

GOST

Bubnov S. S., Malyukov S. V., Aksenov A. A. OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING // Actual directions of scientific researches of the XXI century: theory and practice. 2020. no. 1. pp. 29-34. DOI: https://doi.org/10.34220/2308-8877-2020-8-1-29-34. (Date of access 30.10.2026).

MLA

S. Bubnov, Malyukov S. V., Aksenov A. A.. "OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING." Actual directions of scientific researches of the XXI century: theory and practice 8.1 (2020): 29-34. DOI: https://doi.org/10.34220/2308-8877-2020-8-1-29-34.

APA

Bubnov S. S., Malyukov S. V., Aksenov A. A. (2020). OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING. Actual directions of scientific researches of the XXI century: theory and practice, 8(1), 29-34. https://doi.org/10.34220/2308-8877-2020-8-1-29-34

Chicago

S. Bubnov, Malyukov S. V., Aksenov A. A.. "OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING." Actual directions of scientific researches of the XXI century: theory and practice 8, no. 1 (2020): 29-34. https://doi.org/10.34220/2308-8877-2020-8-1-29-34.

WIKI

{{cite journal | author = Bubnov S. S., Malyukov S. V., Aksenov A. A. | title = OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING | journal = Actual directions of scientific researches of the XXI century: theory and practice | year = 2020 | volume = 8 | issue = 1 | pages = 29-34 | doi = 10.34220/2308-8877-2020-8-1-29-34 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

OVERVIEW OF DESIGNS OF TREE-PLANTING MACHINE FOR OPEN AREAS AND CLEARED FELLING

Confirmation