VAK Russia 05.21.03 UDC 63

IMPROVING STRENGTH INDICATORS OF FSF PLYWOOD BY USING MODIFIING ADDITIVES TO BINDING AGENT

Published in Forestry Engineering Journal · Volume 10, Issue 1, 2020 · Pages 124–135 · Rubric: WOOD PROCESSING. CHEMICAL TECHNOLOGY
DOI: https://doi.org/10.34220/issn.2222-7962/2020.1/13
Received: 04.03.2020 Accepted: 27.05.2020 Published: 27.05.2020 Language of publication: ru-RU
Improving the production process of FSF waterproof plywood has been relevant since the beginning of its pro-duction. Only the criteria for improving the quality of plywood products are changing. At the present stage, the costs of improving the quality of plywood cannot be compensated by an increase in prices. Reduction in production costs is required. A rational way to improve operational properties is to reduce pressing temperature and introduce modifying additives that increase adhesive and cohesive strength of phenol-formaldehyde binder. The problem is that when press-ing temperature is reduced to 150 °C or lower, phenol-formaldehyde binder does not reach the resite stage. It negatively affects the strength and water resistance of FSF plywood. It was decided to use modifying additives in the adhesive composition to bind free methylol groups of the oligomer and increase the number of active sites in the curable phenolic binder network. The strength properties of FSF plywood with the use of nine modifying additives have been investigated. The consumption of modifiers varied in the range of 0.25-1.5% in increments of 0.25%. Pressing was carried out at a temperature of 120 °С. An improvement in the tensile strength of plywood when shearing on the adhesive layer was found to be 5-15% (in comparison with control samples without the addition of a modifier) when aqueous solutions of hexavalent aluminum chloride, anhydrous magnesium chloride, eight-zinc zinc sulfate, sulfosalicylic acid, dimethylglyoxime with a different proportion of additives were used as modifying additives to phenol-formaldehyde binder. Tensile strength under static bending of plywood is also increased when using modifiers with different proportion of additives
FSF plywood, phenol-formaldehyde binder, modifying additives, pressing temperature, strength, chipping, static bending
Text References
Text (PDF)
Read Download

1. Conner, A. H. Accelerated Cure of Phenol-Formaldehyde Resins: Studies With Model Compounds / A. H. Conner, L. F. Lorenz, K. C. Hirth // Journal of Applied Polymer Science. - 2002. - Vol. 86. - no. 1. - pp. 3256-3263. . - Bibliography: r. 3256-3263 (19 titles). - DOI:https://doi.org/10.1002/app.11106.

2. Hoong, Y. B. Fortification of sulfited tannin from the bark of Acacia mangium with phenol-formaldehyde for use as plywood adhesive / Y. B. Hoong, M. T. Paridah, C.A. Luqman, M.P. Koh, Y.F. Loh // Industrial Crops and Products. - 2009. - Vol. 30. - rr. 416-421. - DOIhttps://doi.org/10.1016/j.indcrop.2009.07.012.

3. Hussin, M. H. Preparation of environmental friendly phenol-formaldehyde wood adhesive modified with kenaf lignin / M. H. Hussin, H. H. Zhang, N. A. Aziz, N. A. Samad, A. H. Faris, M. N. Mohamad Ibrahim, A. Iqbal, A. F. Abdul Latip, M.K. Mohamad Haafiz // Beni-Suef University Journal of Basic and Applied Sciences. - 2017. - Vol. 6. - pp. 409-418. - Bibliography: r. 409-418 (25 titles). - DOI.org/10.1016/j.bjbas.2017.06.004.

4. Mirski, R. Potential of shortening pressing time or reducing pressing temperature for plywood resinated with PF resin modified using alcohols and esters / R. Mirski, D. Dziurka, J. Lecka // European Journal of Wood and Wood Products. - 2011. - Vol. 69. - no. 2. - rr. 317-323. - Bibliography: r. 317-323 (19 titles). - DOI:https://doi.org/10.1007/s00107-010-0436-8. EDN: https://elibrary.ru/PYFTJB

5. Miyazaki, J. Effect of the addition of Acacia mangium bark on thermosetting of phenol-formaldehyde resin / J. Miyazaki, Y. Hirabayashi // Wood Sci Technology. - 2011. - Vol. 45. - rp. 449-460. - Bibliography: r. 449-460 (22 titles). - DOI: 10.1007 / s00226-010-0342-6.

6. Qiao, W. Synthesis and characterization of phenol-formaldehyde resin using enzymatic hydrolysis lignin // W. Qiao, S. Li. G. Guo, S. Han, S. Ren, Y. Ma // Journal of Industrial and Engineering Chemistry. - 2015. - Vol. 21. - pp. 1417-1422. - Bibliography: r. 1417-1422 (36 titles).

7. Rusakov, D. S. Modification of Phenol- and Carbamide-Formaldehyde Resins by Cellulose By-products / D. S. Rusakov, G. S. Varankina, A. N. Chubinskii //Polymer Science, Series D. - 2018.- Vol. 11.- no. 1. - pp. 33-38. - Bib-liography: r. 33-38 (7 titles). - DOI:https://doi.org/10.1134/S1995421218010185.

8. Sedliacik, J. Technology of low-temperature production of plywood bonded with modified phenol-formaldehyde resin / J. Sedliacik, P. Bekhta, O. Potapova // Wood research. - 2010. - Vol. 55(4). - rp. 124-130. - Bib-liography: r. 124-130 (22 titles).

9. Ugryumov, S. A. The Use of Furan Oligomers for Modifying Phenol-Formaldehyde Resin in Plywood Industry / S. A. Ugryumov, R. V. Patrakov // Polymer Science, Series D. Glues and Sealing Materials. - 2011. - Vol. 4. -no. 1. - pp. 38-40. - Bibliography: r. 38-40 (3 titles). - DOI:https://doi.org/10.1134/S1995421211010175. EDN: https://elibrary.ru/OBEFHX

10. Valyova, M. Modified phenol - phormaldehyde resins used for plywood gluing / M. Valyova, Y. Ivanova // International Journal - Wood, Design & Technology. - 2015. - Vol. 4. - no. 1. - rr. 35-38. - Bibliography: r. 35-38 (9 titles).

11. Viswanathan, T. Whey modified phenol-Formaldehyde resins as plywood adhesives / T. Viswanathan, A. Toland // Carbohydrate Polymers. - 1991. - Vol. 15. - no. 1. - pp. 41-49. - Bibliography: r. 41-49 (22 titles).

12. Yamamoto, A. Surface modification of birch veneer by peroxide bleaching / A. Yamamoto, A. Rohumaa, M. Hughes, T. Vuorinen, L. Rautkari // Wood Sci Technology. - 2017. - Vol. 51. - rp. 85-95. - Bibliography: r. 85-95 (30 titles). - DOI:https://doi.org/10.1007/s00226-016-0880-7. EDN: https://elibrary.ru/NAMBWK

13. Askadskiy, A. A. Fiziko-himiya polimernyh materialov i metody ih issledovaniya / A. A. Askadskiy, M. N. Popova, V. I. Kondraschenko. - Moskva : ASV, 2015. - 408 s. - ISBN 978-5-4323-0072-0.

14. Berlin, A. A. Osnovy adgezii polimerov / A. A. Berlin, V. E. Basin. - Moskva : Himiya, 1974. - 391 s.

15. Varankina, G. S. Analiz effektivnosti snizheniya toksichnosti i sokrascheniya prodolzhitel'nosti skleivaniya drevesnyh materialov razlichnymi modifikatorami / G. S. Varankina // Izvestiya Sankt-Peterburgskoy lesotehnicheskoy akademii. - 2015. - Vyp. 210. - S. 138-148. EDN: https://elibrary.ru/TSXLRV

16. Gul', V. E. Struktura i prochnost' polimerov / V. E. Gul'. - Moskva : Himiya, 1978. - 327 s.

17. Ivanov, A. M. Modifikaciya alyumosilikatami fenoloformal'degidnyh smol dlya skleivaniya fanery / A. M. Ivanov, D. S. Rusakov, G. S. Varankina, A. N. Chubinskiy // Klei. Germetiki. Tehnologii. - 2017. - № 3. - S. 13-17. EDN: https://elibrary.ru/YFSXEZ

18. Kobec, L. P. Strukturoobrazovanie v termoreaktivnyh svyazuyuschih i matricah kompozicionnyh materialov na ih osnove / L. P. Kobec, I. S. Deev // Rossiyskiy himicheskiy zhurnal. - 2010. - T. LIV. - № 1. - S. 67-78. - Bibliogr. : 67-68 (16 nazv.). EDN: https://elibrary.ru/MBCGDP

19. Kompleksnye soedineniya v analiticheskoy himii : Teoriya i praktika primeneniya / F. Umland, A. Yansen, D. Tirig, G. Vyunsh. - Moskva : Mir, 1975. - 531 s.

20. Kukushkin, Yu. N. Himiya koordinacionnyh soedineniy : uchebnoe posobie / Yu. N. Kukushkin. - Moskva : Vysshaya shkola, 1985. - 455 s.

21. Lur'e, Yu. Yu. Spravochnik po analiticheskoy himii / Yu. Yu. Lur'e. - 6-e izd., per. i dop. - Moskva : Himiya, 1989. - 448 s.

22. Magomedov, G. N. Osobennosti relaksacionnyh svoystv voloknistyh, sloistyh, gibridnyh i dispersno - napolnennyh polimernyh kompozitov : special'nost' 02.00.06 «Vysokomolekulyarnye soedineniya» : dis. ... dokt. f.-m. nauk : zaschischena 21.04.2005 / Magomedov Gasan Musaevich; Institut himicheskoy fiziki im. N.N. Semenova Rossiyskoy akademii nauk. - Moskva, 2005. - 285 s. - Bibliogr. 289.

23. Malinskiy, Yu. M. Issledovanie v oblasti fizikohimii geterogennyh polimernyh sistem : special'nost' 02.00.04 «Fizicheskaya himiya» : avtoref. dis. … dokt. him. nauk / Malinskiy Yuriy Mihaylovich ; Nauchno-issledovatel'skiy fiziko-himicheskiy institut im. L. Ya. Karpova. - Moskva, 1970. - 46 s.

24. Rusakov, D. S. Modifikaciya fenoloformal'degidnyh smol othodami proizvodstva alyuminiya i cellyulozy / D. S. Rusakov, G. S. Varankina, A. N. Chubinskiy // Izvestiya vysshih uchebnyh zavedeniy. Lesnoy zhurnal. - 2019. - № 2. - S.130-140. - DOI:https://doi.org/10.17238/issn0536-1036.2019.2.130. EDN: https://elibrary.ru/VZPXQW

25. Sokolova, E. G. Obosnovanie rezhimov skleivaniya shpona pri proizvodstve fanery, izgotovlennoy s primeneniem modificirovannoy fenoloformal'degidnoy smoly / E. G. Sokolova // Sistemy Metody Tehnologii. - 2018. - № 4 (40). - S. 125-131. - Bibliogr. : 125-131 (20 nazv.). - DOI:https://doi.org/10.18324/2077-5415-2018-4-125-131. EDN: https://elibrary.ru/YTQRDN

26. Summ, B. D. Fiziko-himicheskie osnovy smachivaniya i rastekaniya / B. D. Summ, Yu. V. Goryunov. - Moskva : Himiya, 1976. - 231 s.

27. Fizer, L. Reagenty dlya organicheskogo sinteza / L. Fizer, M. Fizer. - Moskva : Mir, 1970. − T. 3. - 445 s.

28. Freydin, A. S. Prognozirovanie svoystv kleevyh soedineniy drevesiny / A. S. Freydin, K. T. Vuba. - Moskva : Lesnaya promyshlennost', 1980. - 224 s.

29. Chubov, A. B. Otverzhdenie fenoloformal'degidnoy smoly pri ponizhennoy temperature / A. B. Chubov, A. A. Zalipaev // Izvestiya Sankt-Peterburgskoy lesotehnicheskoy akademii. - 2003. - Vyp. 170. - S. 105-109. EDN: https://elibrary.ru/HYWINZ