UDC 63

INFLUENCE OF MODIFIERS ON THE CURING TIME OF THE PHENOL FORMALDEHYDE BINDER FOR PRESSING PANELS AT LOW TEMPERATURE MODE

Published in Forestry Engineering Journal · Volume 9, Issue 4, 2020 · Pages 99–108 · Rubric: WOOD PROCESSING. CHEMICAL TECHNOLOGY
DOI: https://doi.org/10.34220/issn.2222-7962/2019.4/11
Received: 17.01.2020 Accepted: 30.01.2020 Published: 30.01.2020 Language of publication: ru-RU
Volumes of plywood production with increased water resistance for indoor and outdoor use (FSF brand) are increasing in Russia. The demand for it in the country and in the world continues to grow. The phenol-formaldehyde oligomer during the curing process passes through the stages of resol, resitol and resite. Ensuring long-term water resistance of plywood is possible only if the resite stage is reached and the solidified phenol-formaldehyde resin (FFR) reaches non-melting and insoluble state. The problem is that the industrial process of FSF plywood pressing is carried out in the rezitol temperature range. In literature, there are conflicting data on the temperature ranges of the stages of the FSF polycondensation process. The authors have proposed to operate with scientific data on the temperature ranges of FFR curing, confirmed by the results of spectroscopic studies. It is necessary to develop phenol-formaldehyde binder compositions capable of curing to the resite stage at lower pressing temperatures than unmodified FSF to ensure the necessary operational characteristics of FSF plywood. In this study, a number of modifiers have been proposed that potentially reduce the time it takes to press plywood at low temperatures. The gelatinization time of the phenol-formaldehyde binder based on the SFZh-3014 resin (according to 20907-2016 State Standard) and modifying additives (hydrogen peroxide, eight-water zinc sulfate, ammonium alum, anhydrous magnesium chloride, six-water iron chloride, six-water aluminum chloride, aluminum dimethyl sulfate, dimethyl glyoximate, and sulfate, sulfosalicylic two-water acid) have been determined. A study of the gelatinization process in the presence of a large number of modifying additives (more than 1.5%) revealed a significant deterioration in the spreadability of the binder. Therefore, it is recommended to use FFR curing accelerators in the amount not exceeding 1-1.5%.
FSF plywood, phenol formaldehyde binder, pressing temperature, curing, modifying additives, gelatinization time
Text References
Text (PDF)
Read Download

1. Al-Azzawi, A. M. Synthesis and Curing of New Phenolic Resins Containing Pendant TetrachloroPhthalimides / A. M. Al-Azzawi // ‫‬Iraqi Journal of Science, 2016. - Vol. 57. - P. 1345-1356.‬‬

2. Martin, R. W. The Chemistry of Phenolic Resins / R. W. Martin. - New York : Wiley, 1956.

3. Pilato, L. Phenolic Resins: A Century of Progress / ed. L. Pilato. - Heidelberg, Dordrecht, London, New York : Springer, 2010. - 545 p.

4. Sedliacik, J. Technology of low-temperature production of plywood bonded with modified phenol-formaldehyde resin / J. Sedliacik, P. Bekhta, O. Potapova // Wood research, 2010. - Vol. 55(4). - rp. 124-130. URL:https://www.researchgate.net/publication/267026018_Technology_of_low-temperature_production_of_plywood_bonded_with_modified_phenol-formaldehyde_resin.

5. Valyova, M. Modified phenol - phormaldehyde resins used for playwood gluing / M. Valyova, Y. Ivanova // International Journal - Wood, Design & Technology, 2015. - Vol. 4. - no. 1. - rr. 35-38. - URL:https://www.researchgate.net/publication/311618622_M_Valyova_Y_Ivanova_Modified_phenol__phormaldehyde_resins_used_for_playwood_gluing.

6. The effects of temperature and humidity on phenol-formaldehyde resin bonding / H. M. Wang, V. Riedl, A. W. Christiansen, R. L. Geimer // Wood Science and Technology, 1995. - Vol. 29(4). - rp. 253-266. - URL: https://www.researchgate.net/publication/227109350_The_effects_of_temperature_and_humidity_on_phenolformaldehyde_resin_bonding.

7. Azarov, V. I. Himiya drevesiny i sinteticheskih polimerov : uchebnik / V. I. Azarov, A. V. Burov, A. V. Obolenskaya. - 2-e izd., ispr. - Sankt-Peterburg : Lan', 2010. - 624 s. // Elektronno-bibliotechnaya sistema. Izdatel'stvo «Lan'». - URL:https://e.lanbook.com/book/582. EDN: https://elibrary.ru/QNEXTJ

8. Askadskiy, A. A. Fiziko-himiya polimernyh materialov i metody ih issledovaniya / A. A. Askadskiy, M. N. Popova, V. I. Kondraschenko. - Moskva : ASV, 2015. - 408 s.

9. Bahman, A. Fenoplasty / A. Bahman, K. Myuller. - Moskva : Himiya, 1978. - 288 s.: il. - Leypcig, 1973.

10. Varankina, G. S. Issledovanie adgezionnyh svoystv modificirovannyh kleevyh kompoziciy / G. S. Varankina, A. N. Chubinskiy, D. S. Rusakov // Aktual'nye problemy i perspektivy razvitiya lesopromyshlennogo kompleksa : sb. nauch. trudov III Mezhdunar. nauch.-tehn. konferencii. - Kostroma : KGTU, 2015. - S. 100-102. EDN: https://elibrary.ru/UTUWWV

11. Varankina, G. S. Formirovanie nizkotoksichnyh kleenyh drevesnyh materialov : monografiya / G. S. Varankina. A. N. Chubinskiy. - Sankt-Peterburg : Himizdat, 2014. - 148 s.

12. K voprosu o sinteze i stroenii rezol'nyh fenoloformal'degidnyh smol / A. A. Varfolomeev [i dr.] // Zhurnal prikladnoy himii. - 2009. - T. 82, vyp. 6. - S. 1043-1045. EDN: https://elibrary.ru/WCYVKG

13. Deev, I. S. Issledovanie mikrostruktury i osobennostey razrusheniya epoksidnyh matric / I. S. Deev, L. P. Kobec // Klei. Germetiki. Tehnologii. - 2013. - № 5. - S. 19-27. EDN: https://elibrary.ru/PZFVXF

14. Irzhak, V. I. Setchatye polimery (sintez, struktura i svoystva) : monografiya / V. I. Irzhak, B. A. Rozenberg, N. S. Enikolopyan. - Moskva : Nauka, 1979. - 248 s.

15. Irzhak, V. I. Himicheskaya fizika otverzhdeniya oligomerov : monografiya / V. I. Irzhak, S. M. Mezhikovskiy ; otv. red. A. E. Chalyh. - 2-e izd., per. i dop. - Moskva : Yurayt, 2019. - 276 s.

16. Issledovanie i razrabotka tehnologii proizvodstva atmosfero- i vodostoykoy fanery s ispol'zovaniem kleev na osnove melaminovyh smol. - URL: http://utsrus.com/documents/seminary_doklady/melamin_doklad.pdf.

17. Knop, A. Fenol'nye smoly i materialy na ih osnove / A. Knop, V. Sheyb ; pod red. F. A. Shutova. - Moskva : Himiya, 1983.- 280 s.

18. Kobec, L. P. Strukturoobrazovanie v termoreaktivnyh svyazuyuschih i matricah kompozicionnyh materialov na ih osnove / L. P. Kobec, I. S. Deev // Rossiyskiy himicheskiy zhurnal. - 2010. - T. LIV. - № 1. - S. 67-78. EDN: https://elibrary.ru/MBCGDP

19. Kompozicii materialov iz drevesiny i svyazuyuschih. - URL: https://www.mebelcompass.ru/Lesnoe_hozyaistvo_SSSR/p2_articleid/166.

20. Korshak, V. V. Neravnovesnaya polikondensaciya : monografiya / V. V. Korshak, S. V. Vinogradova. - Moskva : Nauka, 1972. - 696 s.

21. Losev, I. P. Vvedenie v himiyu iskusstvennyh smol i plasticheskih mass / I. P. Losev, G. S. Petrov. - Moskva : ONTI, Glav. red. him. lit-ry, 1938. - 218 s.

22. Losev, I. P. Himiya sinteticheskih polimerov / I. P. Losev, E. B. Trostyanskaya. - 3-e izd. - Moskva : Himiya, 1971. - 617 s.

23. Oudian, Dzh. Osnovy himii polimerov / Dzh. Oudian. - Moskva : Mir, 1974. - 614 s.

24. Issledovanie svoystv otverzhdennyh kleevyh svyazuyuschih / A. P. Petrova, N. F. Lukina, D. A. Mel'nikov, K. L. Besednov, B. F. Pavlyuk // Trudy VIAM: elektron. nauch.-tehnich. zhurn. - 2017. - № 10. - URL: http://www.viam-works.ru. DOI: https://doi.org/10.18577/2307-6046-2017-0-10-6-6; EDN: https://elibrary.ru/ZIGPYV

25. Rossiya v cifrah. 2019 : krat. stat. sb. / Rosstat. - Moskva, 2019. - 549 s.

26. Shishlov, O. F. Vliyanie otverditeley na kinetiku otverzhdeniya rezol'nyh fenolkardanolformal'degidnyh smol / O. F. Shishlov, N. S. Baulina, V. V. Gluhih // Vestnik Kazanskogo tehnologicheskogo universiteta. - 2012. - T. 15. - № 6. - S. 38-41. EDN: https://elibrary.ru/OWNPWN

27. El'bert, A. A. Himicheskaya tehnologiya drevesnostruzhechnyh plit / A. A. El'bert. - Moskva : Lesnaya promyshlennost', 1984. - 224 s.