UDC 62

TECHNOLOGY AND TOOLS FOR SIMULTANEOUS PRELIMINARY AND FINISH MILLING OF INTERMITTENT WELD SURFACES Technology and tools for simultaneous preliminary and finish milling of intermittent weld surfaces

Published in Science intensive technologies in mechanical engineering · Volume 2018, Issue 12 · Pages 3–8 · Rubric: SCIENCE INTENSIVE TECHNOLOGIES OF MACHINING (archived)
DOI: https://doi.org/10.30987/article_5bf8151e912aa3.24761645
Received: 21.11.2018 Accepted: 29.11.2025 Language of publication: RUS
The paper reports the analysis of technology and design of milling cutters for face milling and their drawbacks are defined. There is developed a combined cutter which allows carrying out weld surface preliminary and finish face milling in the course of one pass, reducing roughness and increasing machining productivity.
face milling, weld surface, combined milling cutter, allowance distribution, roughness, productivity
Text References
Text (PDF)
Read Download

1. Pat. No. 2414333 BRD, IPC B23C 5/06. Milling Head / Ralf Kloetzer, Helmut Klein, Markus Heinlos; applied 21.11.2006, published 20.03.2011,

2. Pat. 2102199 the RF, IPC B23C 5/00. Precast End Mill / Burochkin Yu.P.; applied 18.08.1994, published 20.01.1998

3. Reference Book of Technologist-Machinist. In 2 Vo-lumes. Vol.2 / under the editorship of A.M. Dalsky, A.G. Sus-lov, A.G. Kosilova et al. - M.: Mechanical Engineering, 2001. - ISBN 5-94275-015-7.

4. Gusev, V.G., Simakov, A.G. Analysis of Intermittent Surface End Milling Scheme // STIN. - 2013. - No.6. - pp. 27-30.

5. Pat. 2482941 the RF, IPC B23C 5/06/ Prefabricated End Mill / Gusev V.G., Simakov A.G., applied 26.09.2011, published 27.05.2013, Bull. No.15.

6. Pat. 130529 the RF, IPCB23C 5/06. End Mill for Com-bined Milling / Gusev V.G., Simakov A.G., applied 20.02.2013, published 27.07.2013, Bull. No.21.

7. Gusev, V.G. Efficient technology of weld surface ma-chining of body parts // Science Intensive Technologies in Me-chanical Engineering. - 2018. - No.2(80). - pp. 14-20.