Peculiarities in mechano-composite structural state based on  aluminum for gas detonation sputtering

Alexandr Sitnikov; Aleksey Sobachki; Vladimir Yakovlev; Marina Loginova; Anton Sviridov

doi:10.12737/article_5a313b64412fb3.98021038

UDC 62

PECULIARITIES IN MECHANO-COMPOSITE STRUCTURAL STATE BASED ON ALUMINUM FOR GAS DETONATION SPUTTERING Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering

АА Аа

Published in Science intensive technologies in mechanical engineering · Volume 2017, Issue 12 · Pages 20–25 · Rubric: FUNCTION-ORIENTED AND MODULAR TECHNOLOGIES (archived)

DOI: https://doi.org/10.12737/article_5a313b64412fb3.98021038

Received: 09.12.2017 Accepted: 01.12.2025 Language of publication: ENG

Authors

Alexandr Sitnikov

Aleksey Sobachki

Vladimir Yakovlev

Marina Loginova

et al.

Anton Sviridov

Alexandr Sitnikov

Academic degree: doctor of technical sciences

Science rang: professor

Polzunov Altai State Technical University Professor · department “Mechanical Engineering Technology” · Barnaul

Aleksey Sobachki

Academic degree: candidate of technical sciences

Altayskiy gosudarstvennyy tehnicheskiy universitet im. I.I. Polzunova starshiy nauchnyy sotrudnik · PNIL SVS · Russian Federation · Барнаул

Vladimir Yakovlev

Academic degree: candidate of technical sciences ; candidate of technical sciences

Polzunov Altai State Technical University docent · kafedra NTTS · Barnaul

Marina Loginova

Academic degree: candidate of technical sciences

Polzunov Altai State Technical University starshiy nauchnyy sotrudnik · PNIL SVS · Barnaul

Anton Sviridov

Academic degree: graduate student of technical sciences

Polzunov Altai State Technical University aspirant · Barnaul

ABSTRACT

Structural peculiarities of a powder composite mixture on the basis of aluminum and dispersion carbon structures intended for gas-detonation sputtering for an anti-friction purpose are investigated in the paper. As initial materials there was used an aluminum powder, carbon powder, boron carbide powder, powder slurry consisting of fullerenes C60 and ultra-dispersion diamonds in a certain ratio. The powder mixture obtained was subjected to a mechanical activation with the aid of a planetary ball mill of AGO-2S type. According to the results of the morphological analysis it was established that a composite mixture possesses a layer structure characteristic for powder mixtures subjected to a mechanical activation in the course of a long period of time. A mean size of obtained mechano-composite particles makes about 100…150 mkm. An X-ray structural investigation of a composite powder mixture formulations 70% Al+30%C+B4C and 70%Al + 30%C60 (total %) + B4C after mechanical activation revealed that boron carbide contributes well to the amorphization of a composite powder mixture. It is also established that after mechano-activation of the “Al+C+B4C” powder mixture during 4 min carbon transforms to an X-ray amorphous state to which testifies the presence of amorphous “halo” at small angles and carbon peaks disappeared completely. There is no carbon dissolution in aluminum and chemical compounds are not formed.

KEYWORDS

composite material; aluminum; carbon; fullerene; gas detonation sputtering

Text

Text (PDF)

Read Download

1. Sobachkin, A.V., Sitnikov, A.A., Sviridov, A.P. Evaluation of wear resistance of products on the basis of mechanically activated materials // Applied Mechanics and Materials. - 2015. - Vol. 698. - P. 374-377.

2. Hogmark, S., Jacobson, S., Larsson, M. Design and evaluation of tribological coatings // Wear. - 2000. - V. 246. - P. 20-33.

3. Sobachkin, A.V. Yakovlev, V.I., Sitnikov, A.A. Appli-cation of methods of self-propagating high-temperature synthesis and mechano-activation processing for new filler creation // Pre-production in Mechanical Engineering. - 2012. - No.9. - pp. 17-22.

4. Mitterer, C., Lenhart, H., Mayrhofer, P.H., Kathrein, M. Sputter-deposited Al-Au coatings // Intermetallics. - 2004. - Vol. 12. - P. 579-587.

5. Yakovlev, V.I., Loginova, M.V., Sobachkin, A.V., Dong, Ya., Guriev, A.M. The obtain-ing of mechanically alloyed nanostructured layered composites and detonation coatings // Effect of external influences on the strength and plasticity of metals and alloys : Book of the International seminar articles. - 2015. - P. 108.

6. Wei, Q. Narayan, J. Superhard diamond-like carbon: preparation, theory, and properties // International Materials Reviews. - 2000. - Vol. 45. - P. 133-164.

7. Sobachkin, A.V., Yakovlev, V.I., Sitnikov, A.A., Logi-nova, M.V., Ivanov, S.G., Sviridov, A.P. Piston skirt gas detonation coatings of internal combustion engines based on aluminum-matrix carbon-containing composite material // Strengthening Technologies and Coatings. - 2016. - No.7. (139). - pp. 34-38.

8. Sobachkin, A.V., Yakovlev, V.I., Sitnikov, A.A., Loginova, M.V., Ivanov, S.G., Sviridov, A.P. Osoben-nosti formirovaniya pokrytiy iz alyumomatrichnogo uglerodsoderzhaschego kompozicionnogo materiala pri gazodetonacionnom napylenii // Fundamental'nye problemy sovremennogo materialovedeniya. - 2015. - T. 12. - № 4. - S. 444-449.

9. Khrushchov, M.M., Marchenko, E.A., Levin, I.S., Du-bravina, A.A., Bukalov, S.S., Tarelkin, Yu.A. Nano-composite structure and tribological properties of diamond-like coatings alloyed with chromium // Bulletin of Scientific Technical Development. - 2014. - No.80. - pp. 24-31.

10. Sobachkin, A.V., Sitnikov, A.A., Yakovlev, V.I., Sviridov, A.P. Poroshkovye alyumomatrichnye kompozity dlya gazodetonacionnogo napyleniya pokrytiy // Polzunovskiy al'manah. - 2017. - № 3. - T.1. - S. 115-119.

11. Mitterer, C., Lenhart, H., Mayrhofer, P.H., Kathrein, M. Sputter-deposited Al-Au coat-ings // Intermetallics. - 2004. - Vol. 12. - P. 579-587.

12. Sobachkin, A.V., Yakovlev, V.I., Sitnikov, A.A., Loginova, M.V., Ivanov, S.G., Sviridov, A.P. Peculiarities in formation of aluminum-matrix carbon-containing composite material coatings at gas detonation sputtering // Fundamental Problems of Modern Material Science. - 2015. - Vol. 12. - No.4. - pp. 444-449.

13. Sobachkin, A.V., Sitnikov, A.A., Yakovlev, V.I., Sviridov, A.P. Powder aluminum composites for gas detonation sputtering // Polzunov Anthology. - 2017. - No.3. - Vol.1. - pp. 115-119.

PDF JATS XML

Chief Editor

Anatoliy Suslov

naukatm@yandex.ru

Deputy Editor-in-chief

Mikhail Shalygin

+7(903)868-85-68

Editor

Anastasia Klenicheva

Editor

Nikolay Lukashov

5617

downloads

GOST

Sitnikov A. A., Sobachki A. V., Yakovlev V. I., Loginova M. V., Sviridov A. P. Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering // Science intensive technologies in mechanical engineering. 2017. no. 12. pp. 20-25. DOI: https://doi.org/10.12737/article_5a313b64412fb3.98021038. (Date of access 02.11.2026).

MLA

Alexandr Sitnikov, Sobachki A. V., Yakovlev V. I., Loginova M. V., Sviridov A. P.. "Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering." Science intensive technologies in mechanical engineering 2017.12 (2017): 20-25. DOI: https://doi.org/10.12737/article_5a313b64412fb3.98021038.

APA

Sitnikov A. A., Sobachki A. V., Yakovlev V. I., Loginova M. V., Sviridov A. P. (2017). Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering. Science intensive technologies in mechanical engineering, 2017(12), 20-25. https://doi.org/10.12737/article_5a313b64412fb3.98021038

Chicago

Alexandr Sitnikov, Sobachki A. V., Yakovlev V. I., Loginova M. V., Sviridov A. P.. "Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering." Science intensive technologies in mechanical engineering 2017, no. 12 (2017): 20-25. https://doi.org/10.12737/article_5a313b64412fb3.98021038.

WIKI

{{cite journal | author = Sitnikov A. A., Sobachki A. V., Yakovlev V. I., Loginova M. V., Sviridov A. P. | title = Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering | journal = Science intensive technologies in mechanical engineering | year = 2017 | volume = 2017 | issue = 12 | pages = 20-25 | doi = 10.12737/article_5a313b64412fb3.98021038 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

PECULIARITIES IN MECHANO-COMPOSITE STRUCTURAL STATE BASED ON ALUMINUM FOR GAS DETONATION SPUTTERING Peculiarities in mechano-composite structural state based on aluminum for gas detonation sputtering

Confirmation