Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Journals Monographies Textbooks Collections Authors
Submit manuscript
Safety in Technosphere

PROBLEMS AND METHODS OF OIL SLUDGE TREATMENT Problems and Methods of Oil Sludge Treatment

Published in Safety in Technosphere · Pages 24–29 · Rubric: Methods and means of safety
DOI: https://doi.org/10.12737/24722
Received: 21.02.2017 Accepted: 21.02.2017 Published: 21.02.2017 Language of publication: RUS
Authors
E.
E. Senik
A.
A. Voropaeva
R.
R. Taranov
A.
A. Kozodaev
BO
Boris Ksenofontov
M.
M. Vinogradov
ABSTRACT
Urgency of the problem of sludge treatment and disposal in recent times is noted in this paper. Questions related to sludge and other waste treatment by centrifugation both with pre-treatment, and without it, have been considered. It has been demonstrated that the treatment is more effective at heating of above-noted waste, and by reagents adding. As a result of use of centrifuges at a stage of above-noted waste treatment it is possible to reach rather high degree of separation into liquid and firm phases which can be used in various directions. Further dewatering is possible by using a proposed drying scheme with a closed circuit of heat transfer fluid. The scheme includes a unit for heat transfer fluid preparation, a drying chamber, a device for a finished product unloading, a cleaning system for used drying agent, a unit for additional cleaning of heat transfer fluid, dual-circuit system of pneumatic transport for the finished product. The proposed scheme contributes to exclusion of sludge’ toxic substances from getting into the environment. Experimental studies of activated sludge suspension thickening process after secondary clarifiers in centrifuges of different types have been carried out. Tests were conducted on laboratory and industrial direct-flow and counter-flow centrifuges. Optimal parameters and modes for centrifugation and thermo-reactant treatment were selected. Effectiveness of preliminary thermo-reactant treatment at a predetermined optimal centrifugation mode for activated sludge has been confirmed. The solids content in the concentrate of microbial biomass at the load 10–13 m3/h reached 9–10 % DIA. At the maximum capacity was used one nozzle with 6 mm diameter. Minimum specific dosage of flocculent is about 2 kg per 1 ton of dry product.
KEYWORDS
production waste, sludge, activated sludge, centrifugation, settling-type centrifuge, drying, closed circuit of heat transfer fluid, chemical reagents.
Text References
Text
Text (PDF)
Read Download

Проблема обработки осадков и их утилизации на протяжении последних десятилетий стала весьма актуальной, пока не просматриваются универсальные пути решения задач в этом направлении [1–6]. По- прежнему многотоннажные отходы в малой степени утилизируются, а их основное количество складируется на полигонах. Поэтому новые технические решения очень актуальны для практических технологий по обработке и утилизации различных отходов [7, 8].

1. Aleksandrov A. A., Arkharov I. A., Bagrov V. V., Devyanin S. N., Ksenofontov B. S., Lobanov B. S., Markov V. A., Sereda A. V., Sharin E. A., Shpak A. V. Neftyanye motornye topliva: ekologicheskie aspekty primeneniya [Petroleum motor fuels: environmental aspects of the application]. Moscow, NITs «Inzhener» Publ., Oniko-M Publ., 2014. 691 p. (in Russian).

2. Ksenofontov B. S. Ochistka stochnykh vod: flotatsiya i sgushchenie osadkov [Wastewater treatment: sludge thickening and flotation]. Moscow, Khimiya Publ., 1992. 144 p. (in Russian).

3. Ksenofontov B. S., Kozodaev A. S., Taranov R. A., Senik E. V., Vinogradov M. S., Voropaeva A. A. Intensifikatsiya protsessa pererabotki nefteshlamov [The intensification of the process of refining oil sludge]. Santekhnika [Plumbing]. 2015, I. 2, pp. 58-60 (in Russian).4. Ksenofontov B. S. Water systems f lotation treatment. Wastewater and soil flotation treatment. Saarbrucken: LAP LAMBERT Acad. Publ., 2011. 189 p.

4.

5. Gron’ V.A., Korostovenko V. V., Shakhray S. G., Kaplichenko N. M., Galayko A. V. Problema obrazovaniya, pererabotki i utilizatsii nefteshlamov [The problem of education, treatment and disposal of sludge]. Uspekhi sovremennogo estestvoznaniya [Successes of modern science]. 2013, I. 9, pp. 159-162 (in Russian).

6. Gvozdev V. D., Ksenofontov B. S. Ochistka proizvodstvennykh stochnykh vod i utilizatsiya osadkov [Process Wastewater Treatment and disposal of sediments]. Moscow, Khimiya Publ., 1988. 112 p. (in Russian).

7. Akhmetov A. F., Gaysina A. P., Mustafin I. A. Tekhnologiya utilizatsii neftyanykh shlamov [The technology of recycling of oil sludge]. Neftegazovoe delo [Oil and gas business]. 2011, V. 9, I. 4, pp. 95-97 (in Russian).

8. Meshcheryakov S. V., Pestsov K. K., Shmal’ G.I., Ivanova E.A. O neobkhodimosti kompleksnogo podkhoda k pererabotke neftyanykh otkhodov [On the need for an integrated approach to processing waste oil]. Bezopasnost’ zhiznedeyatel’nosti [Health and Safety]. 2012, I. 3, pp. 31-33 (in Russian).

9. Timonin A. S. Inzhenerno-ekologicheskiy spravochnik [Engineering and Environment directory]. Kaluga, N. Bochkarevoy Publ., 2003, V. 2, 884 p.

PDF Text JATS XML
The contact persons
Editor-in-Chief
Vladimir Devisilov
devisil@mail.ru
Executive Editor
Dar'ya Sklyankina
501@infra-m.ru
5881
downloads
RINC
© INFRA-M
Agreement Personal data protection and processing policy Support Powered by Editorum, 2026 Instructions
Login or Create
* Forgot your password?