Automation balance calculations system of recovery feed water at work energy units of thermal power plants.

Leonid Pugach; Pavel Kunitsyn; Aleksandr Strebkov

doi:10.12737/22991

AUTOMATION BALANCE CALCULATIONS SYSTEM OF RECOVERY FEED WATER AT WORK ENERGY UNITS OF THERMAL POWER PLANTS. Automation balance calculations system of recovery feed water at work energy units of thermal power plants.

АА Аа

Published in Bulletin of Bryansk state technical university · Volume 2015, Issue 3 · Pages 40–51 · Rubric: Mechanical engineering and transport

DOI: https://doi.org/10.12737/22991

Received: 01.12.2016 Accepted: 01.12.2016 Published: 01.12.2016 Language of publication: RUS

Authors

Leonid Pugach

Pavel Kunitsyn

Aleksandr Strebkov

Leonid Pugach

Academic degree: candidate of physical and mathematical sciences

Science rang: docent

Bryansk State Technical University Associate Professor · Department “Computer Science and Software” · Bryansk

Pavel Kunitsyn

Aleksandr Strebkov

ABSTRACT

The problems of optimizing and automating the process of calculating the thermal schemes steam-turbine plants. The possibility of using different means of software Mathcad for calculation of the energy and mass balance of energy units. Investigated the matrix method for solving equations of heat balance diagrams of steam-turbine plants.

KEYWORDS

steam-turbine plant, heat balance, mass balance, automation of balance calculations, matrix enthalpies, heat exchanger, optimization.

Text

Text (PDF)

Read Download

1. Voskoboynikov, Yu.E. Programming and problem decision by means of package Mathcad: Manual / Yu.E. Voskoboynikov, V. F. Ochkov. - Novosibirsk: NSUACE, 2002. - 136 p.

2. Complex optimization of thermal power systems / under the editorship of L. S. Popyrin. - Novosibirsk: Science, 1976. - 318 p.

3. Makarov, E.G. Engineering calculations in Mathcad 15. Training Course / E.G. Makarov. - SPb.: St. Petersburg, 2011. - 400 p.

4. Ochkov, V.F. MathCAD 14 for students, engineers and designers / V. F. Ochkov. - SPb.: BHV-St. Petersburg, 2007. - 368 p.

5. Steam-turbine plants for thermal power station and NPP. Industry Catalog 37-93. - M.: CSRIITERheavymach, 1994. - 96 p.

6. Popyrin, L.S. Mathematical modeling and optimization of heat-and-power plants / L.S. Popyrin. - M.: Energy, 1978. - 415 p.

7. Popyrin, L.S. Mathematical modeling automation of heat-and-power plants / L.S. Popyrin, V. I. Samusev, V. V. Epelstein; Sibir. Energ. Institute - M.: Science, 1981. - 236 p.

8. Expansion of water vapor in the turbine: hs-diagram. - Access Mode: http://twtmas.mpei.ac.ru/mas/ Worksheets/h_s_Exp.mcd.

9. Rivkin, S. L. Thermodynamic parameters of water and water vapor / S. L. Rivkin, A. A. Alexandrov. - 2-d Edition, revised and supplemented - M.: Energy, 1984. - 80 p.

10. Sokolov, E.Ya. Industrial thermal power plants: College textbook / E.Ya. Sokolov, M. I. Bazhenov, A. S. Bogorodsky, B. V. Sazanov, V. N. Yurenev; under the editorship of E. Ya. Sokolov. - 2-d Edition, revised - M.: Energy, 1979. - 296 p.

11. Sterman, L.S. Thermal and nuclear power plants: College textbook / L.S. Sterman, S. A. Tevlin, A. T. Sharkov; under the editorship of L.S. Sterman. - 2-d Edition, revised and supplemented - M.: Energoizdat, 1982. - 456 p.

12. Taubman, E.I. Analysis and synthesis of thermo technical systems / E.I. Taubman. - M.: Energoatomizdat, 1983. - 176 p.

13. Heatexchange equipment of steam-turbine plants. Industry Catalog 20-89-09. - M.: CSRIITERheavymach, 1989.

PDF JATS XML

Editor-in-Chief, editorial board chair

Editor-in-chief of the journal Bulletin of Bryansk State Technical University KHANDOZHKO ALEKSANDER VLADIMIROVICH Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03. Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.

6219

downloads

GOST

Pugach L. I., Kunitsyn P., Strebkov A. Automation balance calculations system of recovery feed water at work energy units of thermal power plants. // Bulletin of Bryansk state technical university. 2016. no. 3. pp. 40-51. DOI: https://doi.org/10.12737/22991. (Date of access 10.10.2026).

MLA

Leonid Pugach, Kunitsyn P., Strebkov A.. "Automation balance calculations system of recovery feed water at work energy units of thermal power plants.." Bulletin of Bryansk state technical university 2015.3 (2016): 40-51. DOI: https://doi.org/10.12737/22991.

APA

Pugach L. I., Kunitsyn P., Strebkov A. (2016). Automation balance calculations system of recovery feed water at work energy units of thermal power plants.. Bulletin of Bryansk state technical university, 2015(3), 40-51. https://doi.org/10.12737/22991

Chicago

Leonid Pugach, Kunitsyn P., Strebkov A.. "Automation balance calculations system of recovery feed water at work energy units of thermal power plants.." Bulletin of Bryansk state technical university 2015, no. 3 (2016): 40-51. https://doi.org/10.12737/22991.

WIKI

{{cite journal | author = Pugach L. I., Kunitsyn P., Strebkov A. | title = Automation balance calculations system of recovery feed water at work energy units of thermal power plants. | journal = Bulletin of Bryansk state technical university | year = 2016 | volume = 2015 | issue = 3 | pages = 40-51 | doi = 10.12737/22991 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

AUTOMATION BALANCE CALCULATIONS SYSTEM OF RECOVERY FEED WATER AT WORK ENERGY UNITS OF THERMAL POWER PLANTS. Automation balance calculations system of recovery feed water at work energy units of thermal power plants.

Confirmation