Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Journals Monographies Textbooks Collections Authors
Submit manuscript
Bulletin of Bryansk state technical university

CONTROL SYSTEM OF TRACTIVE INDUCTION MOTOR WITH POWER LOSS MINIMIZATION. Control system of tractive induction motor with power loss minimization.

Published in Bulletin of Bryansk state technical university · Volume 2015, Issue 2 · Pages 55–61 · Rubric: Mechanical engineering and transport
DOI: https://doi.org/10.12737/22898
Received: 28.11.2016 Accepted: 28.11.2016 Published: 28.11.2016 Language of publication: RUS
Authors
AL
Aleksandr Pugachev
ORCID
VO
Vorobev Vladimir
AN
Andrey Kosmodamianskiy
ORCID
ABSTRACT
The mathematical model of induction motor taking power losses in stator and rotor iron and typical non-linearity is designed. The algorithm of optimal flux linkage reference providing power loss minimization is developed with regard to vector control. The induction motor stator current and voltage limits, the diesel generator unit power are chosen as a limiting factor. The tractive induction motor control system providing the direct regulation of wheel sliding for protection from slipping and having the internal system of power loss minimization is designed. The results of simulation are presented.
KEYWORDS
tractive electric drive, induction motor, vector control, power losses.
Text References
Text
Text (PDF)
Read Download

1. Control system of the traction electric drive with temperature monitoring of the heatloaded elements / A.S. Kosmodamiansky [etc.]//Electrical engineering. - 2014. - No. 8. - pp. 38 - 43.

2. Kosmodamiansky, A.S. Simulation of the electric drive with the induction motor in the mode of power loss minimization / A.S. Kosmodamiansky, V. I. Vorobyov, A.A. Pugachev // Electrical engineering. - 2012. - No. 12. - pp. 26 - 31.

3. Braslavsky, I.YA. Energy saving asynchronous electric drive / I.Ya. Braslavsky, Z.N. Ishmatov, V. N. Polyakov. - M.: Academy, 2004. - 256 p.

4. Inkov, Yu.M. Power losses in induction traction motors of a perspective electro rolling stock / Yu.M. Inkov, T.N. Fadeykin, Ya.A. Bredikhina // Electrical engineering. - 2014. - No. 8. - pp. 44 - 47.

5. Optimization of the traction asynchronous electric drive taking into account losses and steel saturation / A.B. Vinogradov [etc.] // Alternating current drives: XV Inter. Science-Tech. Conf. - Yekaterinburg, 2012. - pp. 285 - 288.

6. Vector control using series iron loss model of induction motors and power loss minimization / K. Aissa, K.D. Ed-dine // World academy of science, engineering and technology. - 2009. - No. 52. - P. 142 - 148.

7. Loss-minimizing control scheme for induction motors / S. Lim, K. Nam // IEE Proc. - Electr. Power Appl. - 2004 - Vol. 151. - No. 4. - P. 386 - 397.

8. Control of the traction asynchronous electric drive of hybrid vehicles minimizing losses and with a maximum of overload capacity / E.M. Ovsyannikov [etc.] // Priorities of development of domestic automotive industry and preparation of engineering and scientific professionals: Proceedings of the 65-th Inter. Science-Tech. Conf. AAI. - M.: MAMI, 2009. - pp. 120 - 129.

9. Dynamic processes in case of joint regulation of induction traction motors of the locomotive car trucks / G. A. Fedyaeva [etc.] // Bulletin of Bryansk State Technical University. - 2014. - No. 4. - pp. 129−132.

10. Pugachev, A.A. Mathematical model for research of electromechanical processes in the electric drive with the induction motor / A.A. Pugachev // Electrical engineering. Power engineering. Mechanical engineering: Proceedings of the I Inter. Science Conf. of young scientists. - Novosibirsk: Publishing House of NSTU, 2014. - P. 2. - pp. 186 - 190.

11. Bazara, M. Non-linear programming. Theory and algorithms: Monograph/M. Bazara, K. Shetti. - M.: World, 1982. - 584 p.

12. Sukhov, Ya. I. Optimization under the terms of Kuhn - Takker / Ya. I. Sukhov, I. A. Garkina // Young scientist. - 2014. - No. 7. - pp. 182 - 185.

13. Pugachev, A.A.System approach to the research of characteristics of traction and auxiliary locomotive electric drives with induction motors / A.A. Pugachev, A.S. Kosmodamiansky, V. I. Vorobyov // Alternating current drives: XV Inter. Science-Tech. Conf. - Yekaterinburg, 2012. - pp. 281 - 284.

14. Complex physical model of the traction electric drive with induction motors /A.S. Kosmodamiansky [etc.] // Science and transport engineering. - 2014. - No. 3. - pp. 31. - 38.

PDF JATS XML
The contact persons
Editor-in-Chief, editorial board chair
Editor-in-chief  of the journal  Bulletin of Bryansk State Technical University  KHANDOZHKO ALEKSANDER VLADIMIROVICH     Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03.   Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.
6168
downloads
VAK Crossref RINC RINC Science Index Antiplagiat
© INFRA-M
Agreement Personal data protection and processing policy Powered by Editorum, 2026
Login or Create
* Forgot your password?