PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS

Y. Chzhao; Fu   Tsun

doi:10.12737/22135

PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS

Published in Bulletin of Bryansk state technical university · Volume 2016, Issue 3 · Pages 299–304 · Rubric: Tribune of the international youth open forum

DOI: https://doi.org/10.12737/22135

Received: 11.10.2016 Accepted: 11.10.2016 Published: 11.10.2016 Language of publication: RUS

Authors

Y. Chzhao

Fu Tsun

Y. Chzhao

Fu Tsun

ABSTRACT

In the paper is made an attempt to consider professional environment as a basis for practice under conditions of a modern high dynamic society for which there were considered not only theoretical aspects of a corresponding range of questions, but a current practice by the example of higher professional education in China. The first part of the paper is devoted to the consideration of perception categories, knowledge, and intelligence in scientific sources. The second part of the paper touches upon the questions of the education influence upon a profession choice. In the third part of the paper the process of higher education perfection in the CPR on the basis of the university number dynamics, the number of students and lecturers, university entrants, schoolleavers and a number of other indices is considered. As a result of the analysis carried out it is possible to draw a conclusion of that the higher education in China has passed a long way of development and at the same time have grown its quantitative indices and last but not least qualitative ones.

KEYWORDS

professional environment, labor motivation, practice, professional growth, higher education, China

Text

Text (PDF)

Read Download

1. Kokhanovsky, V.P. Fundamentals of Science Phi-losophy / V.P. Kokhanovsky [et al.]. - М.: Phoenix, 2012. - pp. 603.

2. Asmus, V.F. Immanuil Kant / V.F. Asmus. - М.: Higher School, 2011. - pp. 439.

3. Philosophical Encyclopaedic Dictionary / editorcompiler Е.F. Gubsky [et al.]. - М.: Infra-М, 2012. - pp. 576.

4. Gusakovsky, М. А. University as Center of Cul-ture-generating Education. Communication Forms Change in Educational Process / М. А. Gusakovsky, L. А. Yashchenko, С. V. Kostyukevich [et al.]; under the editorship of М. А. Gusakovsky. - Мinsk: BSU, 2013.

PDF JATS XML

Editor-in-Chief, editorial board chair

Editor-in-chief of the journal Bulletin of Bryansk State Technical University KHANDOZHKO ALEKSANDER VLADIMIROVICH Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03. Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.

4646

downloads

GOST

Chzhao Y., Fu T. PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS // Bulletin of Bryansk state technical university. 2016. no. 3. pp. 299-304. DOI: https://doi.org/10.12737/22135. (Date of access 04.11.2026).

MLA

Y. Chzhao, Fu T.. "PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS." Bulletin of Bryansk state technical university 2016.3 (2016): 299-304. DOI: https://doi.org/10.12737/22135.

APA

Chzhao Y., Fu T. (2016). PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS. Bulletin of Bryansk state technical university, 2016(3), 299-304. https://doi.org/10.12737/22135

Chicago

Y. Chzhao, Fu T.. "PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS." Bulletin of Bryansk state technical university 2016, no. 3 (2016): 299-304. https://doi.org/10.12737/22135.

WIKI

{{cite journal | author = Chzhao Y., Fu T. | title = PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS | journal = Bulletin of Bryansk state technical university | year = 2016 | volume = 2016 | issue = 3 | pages = 299-304 | doi = 10.12737/22135 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

PROFESSIONAL ENVIRONMENT MANAGEMENT AS PRACTICE BASIS

Confirmation