FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON

Konstantin Makarenko; Dmitriy A. Ilyushkin

doi:10.12737/18185

FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON

Published in Bulletin of Bryansk state technical university · Volume 2016, Issue 1 · Pages 34–43 · Rubric: Mechanical engineering and transport

DOI: https://doi.org/10.12737/18185

Received: 11.03.2016 Accepted: 11.03.2016 Published: 11.03.2016 Language of publication: RUS

Authors

Konstantin Makarenko

ORCID

Dmitriy A. Ilyushkin

Konstantin Makarenko

Academic degree: doctor of technical sciences

Science rang: professor

Bryansk State Technical University Professor, Head of the Department · Department of Mechanical Engineering and Materials Science · Russian Federation · Bryansk

ORCID

Dmitriy A. Ilyushkin

Academic degree: candidate of technical sciences

Science rang: docent

Bryanskiy gosudarstvennyy tehnicheskiy universitet docent · Mashinostroenie i materialovedenie · Russian Federation

ABSTRACT

The dimensionaltopological parameters of a structure such as size, shape, quantity and distribution characterizing a graphite phase in cast iron exert a significant influence upon material properties. But, the definition of these parameters according to the system presented in SARS 3443-87, to the considerable extent, depends upon human factor. The use of results of such an analysis does not allow creating adequate simulators for the estimation of correlation of structure and properties. The widespread introduction of computer analysis methods for the control of material structures dictates new requirements to the development of methods using a mathematical description of material phase structure. One of the methods based on a multifractal analysis of cast iron microstructure representation is shown in this paper. Data obtained at the use of carbon fleck fractal identification method can be used at the development of simulators of the correlation in structure graphitized cast iron properties.

KEYWORDS

microstructure, fractal analysis, cast iron, carbon flecks, dimensionally-topological parameters.

Text

Text (PDF)

Read Download

1. Falconer, K. Techniques in Fractal Geometry/ K. Falconer. - John Wiley & Sons, 1997. - 256 p.

2. Imasogie, B. I. Characterization of Graphite Particle Shape in Spheroidal Graphite Iron Using a Computer-Based Image Analyzer/ B. I. Imasogie, U. Wendt // Journal of Minerals & Materials Characterization. - 2004. - Vol. 3. - №1. - P. 1-12.

3. Li, J. Fractal growth of graphite nodules in iron/ J. Li, L. Lu, M. O. Lai // Philosophical Magazine Letters. - 2000. - Vol. 80. - № 9. - P. 633-640.

4. Li, J. Quantitative Analysis of the Irregularity of Graphite Nodules in Cast Iron/ J. Li, L. Lu, M. O. Lai // Materials Characterization. - 2000. - Vol. 45. - P. 83-88.

5. Otávio da Fonseca, M.G. Automatic Classification of Graphite in Cast Iron/ M.G. Otávio da Fonseca, P. Sidnei // Microscopy and Microanalysis. - 2005. - Vol. 4. - №11. - P. 363-371.

6. Bozhokin, S.V., Fractals and multifractals / S.V. Bozhokin, D.A. Parshin. - М.-Izhevsk: Regular and Random Dynamics, 2001. - pp. 128.

7. Volchok, I.P, Resistance to Steel and Cast Iron de-struction / I.P. Volchok. - М.: Metallurgy, 1993. - pp. 192.

8. Vstovsky, G.V., Introduction in multifractal parameterization of material structures / G.V. Vstovsky, A.G. Kolmakov, I.Zh. Bunin. - М.-Izhevsk: Regular and Random Dynamics, 2001. - pp. 116.

9. Zolotukhin, I.V., Solidstate fractal structures / I.V. Zolotukhin, Yu.E. Kalinin, V.I. Loginova // Alternative Energy and Ecology. - 2005. - Vol. 29. - № 9. - pp. 56-66.

10. Litovka, V.I. Quality Increase in Highduty Cast Iron in Foundry Goods/ V.I. Litovka. - Kiev: Scientific Thought, 1987. - pp. 206.

11. Mandelbrot, B. Fractal Geometry of Nature / B. Mandelbrot. - М.: Institute of Computer Re-searches, 2002. - pp. 656.

12. Outlooks in application of multifractal analysis method for metal structure images in solution of problems in ensuring safety of hardware operation of dangerous industrial objects / A.D. Anvarov, A.S. Maminov, V.A. Bulkin, G.V. Vstovsky // Control. Diagnostics. - 2006. - № 7. - pp. 17-22.

13. Sotsenko, O.V., Compactness estimation of carbon flecks in high-duty cast iron/ O.V. Sotsenko // Foundry. - 1982. - № 6. - pp. 5-8.

14. Yakovlev, F.I., Influence of graphite form and martensite dispersity upon stressstrain properties of highduty cast iron/ F.I. Yakovlev // Metal Science and Metal Thermal Treatment. - 1986. - № 5. - pp. 55-56.

PDF JATS XML

Editor-in-Chief, editorial board chair

Editor-in-chief of the journal Bulletin of Bryansk State Technical University KHANDOZHKO ALEKSANDER VLADIMIROVICH Aleksander Vladimirovich Khandozhko is Doctor of Engineering (2002), Associate Professor (1993), Honorary Worker of Higher Professional Education of the Russian Federation, Professor of the Department of Metal-cutting Machines and Tools at Bryansk State Technical University (BSTU). He was born in Chelyabinsk in 1958. In 1980 he graduated from Bryansk Institute of Transport Engineering (BITE) (now - Bryansk State Technical University, BSTU) with a degree in Mechanical Engineering Technology, Metal-cutting Machines and Tools. From 1980 to 1983, he worked as a manufacturing engineer at an industrial enterprise. From 1983 until now he has been working at Bryansk State Technical University, having started his career at the university as a training master. In 1985 he entered the full-time postgraduate course in BITE. In 1989 he defended the thesis for the degree of Candidate of Science in the Dissertation Council of Moscow State Aviation Technological Institute (MSATI) on the specialty Heat Engines of Aircrafts. After defending his thesis, he worked as an assistant and then as an associate professor of the department of Metal-cutting Machines and Tools at BITE. In 2000 he entered the post-doctoral program and in 2002 he defended his doctoral thesis on the specialty of Technology and Equipment of Mechanical and Physical-technical Processing. After defending his thesis, he worked as a professor of the department until 2009. In 2009 he was appointed the head of the department of Metal-cutting Machines and Tools at Bryansk State Technical University. In 2016 when the laboratory of wave deformation and combined hardening in additive and subtractive technologies was founded at BSTU, he became the head of the department of modular technological equipment, continuing his teaching work as a professor of the department of Metal-cutting Machines and Tools. Khandozhko A.V. is a member of the editorial board of the journal Science Intensive Technologies in Mechanical Engineering (Bryansk). Since 2002 he has been a member of dissertation councils of several universities; currently he is a member of three dissertation councils D999. 155. 03, D999.112.02 and D212.021.03 aa well as being the Deputy Chairman of Dissertation Council D999.155.03. Topics of scientific research 1. Fundamental theoretical and applied issues of designing cutting tools. 2. Theory and practice of designing and manufacturing process equipment, including for additive-subtractive processes. 3. Issues of mechanical processing of materials. 4. Problems of providing product quality in mechanical processing and additive processes.

5916

downloads

GOST

Makarenko K. V., Ilyushkin D. A. FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON // Bulletin of Bryansk state technical university. 2016. no. 1. pp. 34-43. DOI: https://doi.org/10.12737/18185. (Date of access 07.10.2026).

MLA

Konstantin Makarenko, Ilyushkin D. A.. "FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON." Bulletin of Bryansk state technical university 2016.1 (2016): 34-43. DOI: https://doi.org/10.12737/18185.

APA

Makarenko K. V., Ilyushkin D. A. (2016). FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON. Bulletin of Bryansk state technical university, 2016(1), 34-43. https://doi.org/10.12737/18185

Chicago

Konstantin Makarenko, Ilyushkin D. A.. "FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON." Bulletin of Bryansk state technical university 2016, no. 1 (2016): 34-43. https://doi.org/10.12737/18185.

WIKI

{{cite journal | author = Makarenko K. V., Ilyushkin D. A. | title = FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON | journal = Bulletin of Bryansk state technical university | year = 2016 | volume = 2016 | issue = 1 | pages = 34-43 | doi = 10.12737/18185 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

FRACTAL ANALYSIS OF MICROSTRUCTURES IN GRAPHITIZED CAST IRON

Confirmation