SPECIFICATIONS TO THE ARTICLE "INFLUENCE OF A NEW POLYMERIC AND MINERAL ADDITIVE ON DURABILITY OF A WOOD AND CEMENT MATERIAL FOR LOW CONSTRUCTION" Specifications to the article "Influence of a New Polymeric and Mineral Additive on Durability of a Wood and Cement Material for Low Construction"

Published in Actual directions of scientific researches of the XXI century: theory and practice · Volume 2, Issue 3, p. 4 · Pages 267–268 · Rubric: Section "Ecological ресурсосберегающиетехнологии and systems Woodworking and furniture production "
DOI: https://doi.org/10.12737/4386
Received: 01.06.2014 Accepted: 01.06.2014 Published: 01.06.2014 Language of publication: RUS
There are presented amendments to previously published data on the influence of polymer-mineral additive on the strength of wood-cement material. Wood component is waste as a mixture of sawdust and shavings conifers. If the additive amount is 5% by weight of the cement, the proportion of sawdust with increasing from 0 to 100%, the strength increases. Maximum strength without additive is 1.7 MPa. Maximum strength with additive is 2.3 MPa.
wood-cement material, polymer-mineral supplement «Nicoflok»
Text References

Были определены средние значения прочности для пяти серий образцов древесно-цементного материала с полимерно-минеральной добавкой при различных соотношениях опилок и стружки в древесной составляющей. Число образцов в указанных сериях от трех до пяти включительно [1].

1. Andreev A.A., Vasil´ev SB., Kolesnikov G.N., Syunev B.C. Vliyanie novoy polimerno-mineral´noy dobavki na prochnost´ drevesno-tsementnogo materiala dlya maloetazhnogo stroitel´stva. Sbornik nauchnykh trudov po materialam mezhdunarodnoy zaochnoy nauchno-prakticheskoy konferentsii Aktual´nye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika. 2014. № 2-2 (7-2). S. 292-296. DOI:https://doi.org/10.12737/3157