ESTIMATION OF THE TECHNOLOGICAL POTENTIAL OF PARTS
Abstract and keywords
Abstract (English):
The article describes a methodology for assessing the technological potential of parts, based on the sociophysical theory of potentials and dimensional analysis of the technological process. The technological potential of a part acts as a system characteristic of a complex technical system. The program A'PROPOS was chosen as a tool for calculating the technological potential. A hypothesis has been put forward that the technological potential of the part is associated with the complexity of the technological process of manufacturing this part. It is possible to evaluate it using dimensional analysis using CAD tools. Methods and materials. The emergence and creation of fundamentally new technologies is considered a historical process of development of the designed technical system, in this case, the DSE. The technological potential of the part is formed as the technological process is implemented. The value and structure of the potential are determined and consistent with the properties of the designed part. Based on the results of the analysis of the technological process of manufacturing a part, the construction of a sketch of a part in A'PROPOS., the technological potential is calculated using a mathematical model. The potential is calculated on the basis of the initial data of the enterprise for the object of study. Result. Based on the constructed model, the technological process is optimized. The result is a new machining plan containing the compositions and accuracy of the surfaces machined in the stages and the minimum allowance. Based on the model with variations of dimensional relationships, the dimensional structure is improved to expand the tolerance fields with guaranteed maintenance of technological parameters. Based on this, the deviation in the recommended labor intensity is calculated compared to the real one. Next, the accumulated technological potential of the part was calculated. Conclusions. The system makes it possible to iteratively perform technological calculations, as well as integration with CAD systems in the enterprise. When calculating the technological potential, instead of using the initial data of the enterprise, it is interpreted by the adequacy of the model.

Keywords:
Modeling, complex systems, life cycle, technological potential, computer-aided design systems.
References

1. Abrosimov, S.N. Osnovy komp'yuternoy grafiki SAPR izdeliy mashinostroeniya (MCAD): uchebnoe posobie / S.N. Abrosimov. - SPb., 2018. - 206 s.

2. Beregovskaya, E.O. Voenno-ekonomicheskiy analiz stadiy zhiznennogo cikla vysokotehnologichnoy produkcii / E.O. Beregovskaya, A.I. Shalina, A.S. Krasnikova // Ekonomika vysokotehnologichnyh proizvodstv. - 2022. - T. 3, № 1. - S. 27-38. - DOI:https://doi.org/10.18334/evp.3.1.112260.

3. Bondarenkova, I.V. Integrirovannye sistemy upravleniya zhiznennym ciklom produkcii: uchebno-metodicheskoe posobie / I.V. Bondarenkova. - SPb.: VShTE SPbGUPTD, 2022. - 55 s

4. Burdin, S. S. Konceptual'naya model' upravleniya zhiznennym ciklom naukoemkoy produkcii aviacionnoy promyshlennosti / S. S. Burdin // Ekonomika i predprinimatel'stvo. - 2020. - № 12(125). - S. 1300-1305. - DOI:https://doi.org/10.34925/EIP.2021.125.12.263.

5. Galkin, M.G. Praktika tehnologicheskogo razmernogo analiza : uchebno-metodicheskoe posobie / M.G. Galkin, A.S. Smagin. - Ekaterinburg : Izd-vo Ural. un-ta, 2016. - 107 s.

6. Golubev, S.S. Problemy razvitiya sistemy upravleniya polnym zhiznennym ciklom vooruzheniya, voennoy i special'noy tehniki / S.S. Golubev, G.R. Kukushkina // Ekonomika vysokotehnologichnyh proizvodstv. - 2020. - № 4. - S. 183-196. - DOI: 10.18334/ evp.1.4.111157.

7. Zhuravlev, V.Yu. Upravlenie zhiznennym ciklom izdeliy raketno-kosmicheskoy tehniki : ucheb. posobie / V.Yu. Zhuravlev. - Krasnoyarsk, 2015. - 194 s.

8. Kandybko, N.V. Upravlenie zhiznennym ciklom vysokotehnologichnoy produkcii voennogo naznacheniya / N.V. Kandybko, A.T. Kurmanov // Menedzhment kachestva. - 2019. - № 2. - S. 128-134.

9. Karpov, S. R. Avtomatizirovannye sistemy klassa PLM / S.R. Karpov, N.S. Kovalev, M.A. Dzhuma // Molodoy uchenyy. - 2021. - № 16 (358). - S. 7-10. - URL: https://moluch.ru/archive/358/80083/.

10. Laguta, V.S. Proektirovanie komp'yuterno-integrirovannyh proizvodstv v sostave sistem upravleniya zhiznennym ciklom vysokotehnologichnoy produkcii v mashinostroenii / V.S. Laguta, S.I. Yasinovskiy // Voprosy innovacionnoy ekonomiki. - 2020. - № 3. - S. 1245-1258. - DOI:https://doi.org/10.18334/vinec. 10.3.110623.

11. Mel'nikov, O.N. Rasshirenie podhodov k processu upravleniya zhiznennym ciklom produkcii pri diversifikacii predpriyatiy oboronno-promyshlennogo kompleksa / O.N. Mel'nikov, D.A. Esipenko, D.S. Alabuzhev // Voprosy innovacionnoy ekonomiki. - 2020. - № 3. - S. 1301-1310. - DOI:https://doi.org/10.18334/vinec.10.3.110810.

12. Mustaev, I. Z. Mehanika zhivyh i intellektual'nyh sistem / I.Z. Mustaev. - Ufa : UGATU, 2020. - 160 s.

13. Muftahova, N.A. Principy formirovaniya sistemy monitoringa zhiznennogo cikla sociofizicheskogo ob'ekta s ispol'zovaniem teorii nakoplennyh potencialov / N.A. Muftahova // Nauchno-tehnicheskiy zadel - osnova effektivnogo innovacionnogo razvitiya : sbornik statey Mezhdunarodnoy nauchno-prakticheskoy konferencii. - Ufa, 2021. - S. 18-20.

14. Muftahova, N.A. Razrabotka instrumentariya upravleniya zhiznennym ciklom izdeliya s uchetom ego potencialov / N.A. Muftahova, M.R. Nafikov // Vestnik YuUrGU. Seriya «Komp'yuternye tehnologii, upravlenie, radioelektronika». - 2022. - T. 22, № 1. - S. 5-13. - DOI:https://doi.org/10.14529/ctcr220101.

15. Rusakova, A.S. Analiz sistem upravleniya polnym zhiznennym ciklom vysokotehnologichnoy produkcii v Rossii i zarubezhnyh stranah / A.S. Rusakova, E.A. Starozhuk, A.S. Krasnikova // Voprosy innovacionnoy ekonomiki. - 2021. - T. 11, № 2. - S. 767-784. - DOI:https://doi.org/10.18334/vinec.11.2.112261.

16. Shustov, S.A. CALS-PLM tehnologii. Tekst lekciy / S.A. Shustov, I.N. Krupenich. - Samara, 2019.

17. Smart manufacturing based on cyber-physical systems and beyond / X. Yao [et al.] // Journal of Intelligent Manufacturing. - 2019. - T. 30. - Pp. 2805-2817. - DOI:https://doi.org/10.1007/s10845-017-1384-5

18. Davis, L.S. Towards Unified Data and Lifecycle Management for Deep Learning / L.S. Davis, A. Deshpande // Proceedings of the 2018 IEEE 33rd International Conference on Data Engineering (ICDE). - 2017. - Pp. 571-582. - DOI:https://doi.org/10.1109/ICDE.2017.112.

19. Dennis, A. The System Development Life Cycle / A. Dennis // Systems Analysis & Design: An Object-Oriented Approach with UML. - 2015. - Pp. 3-7.

20. Erofeev, V.S. Metody i tehnologii upravleniya zhiznennym ciklom slozhnyh izdeliy i inzhenernyh ob'ektov / V.S. Erofeev // Ekonomika vysokotehnologichnyh proizvodstv. - 2020. - T. 1. (2). - C. 53-62. - DOI:https://doi.org/10.18334/evp.1.2.110966.

21. How to model and implement connections between physical and virtual models for digital twin application / H. Jiang, S. Qin, J. Fu, J. Zhang, G. Ding // Journal of Manufacturing Systems. - 2021. - T. 58. - Pp. 36-51. - DOI:https://doi.org/10.1016/j.jmsy.2020.05.012.

22. Communication Challenges and Solutions between Heterogeneous Industrial IoT Systems / D. Kozma, G. Soos, D. Ficzere, P. Varga // 2019 15th International Conference on Network and Service Management (CNSM). - 2019. - Pp. 1-6. - DOI:https://doi.org/10.23919/CNSM46954.2019.9012664.

23. Kozma, D. System of Syste Lifecycle Management - A New Concept Based on Proces Engineering Methodologies / D. Kozma, P. Varga // Applied Sciences. - 2021. - T. 11. - C. 3386. - DOI:https://doi.org/10.3390/app11083386.

24. Muftakhova, N.A. Product potential as a method of mathematical modeling of a life cycle management system / N.A. Muftakhova, M.R. Nafikov // PROCEEDINGS OF SPIE - THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING. - 2022. - C. 122510W. - DOI:https://doi.org/10.1117/12.2631225.

25. Ramler, R. Application lifecycle management as infrastructure for software process improvement and evolution: Experience and insights from industry / R. Ramler // Proceedings Conference on Software Engineering and Advanced Applications. - 2011. - Pp. 286-293.

Login or Create
* Forgot password?