Moskva, Moscow, Russian Federation
Russian Federation
Russian Federation
The article discusses the organization of practice-oriented learning at the Department of Engineering Graphics of the RTU MIREA, the essence of which is the development of not only design documentation, but also the production of a prototype device for which design documentation has been made. Geoinformatics students create 3D models of terrain objects: buildings, terrain and vegetation based on photo and video data from drones. The course project serves as the basis for a deeper study of geometric and graphic disciplines in the form of competitive works, scientific reports and publications, or can serve as the basis for the final qualification work. As part of the course work, students of the Institute of Radio Electronics and Informatics perform a multi-level study of an electronic device - a sensor using "smart home" technology. Not only a significant amount of design documentation is developed with the help of circuitry and design CAD: diagrams, printed circuit boards with tracing, assembly drawings, specifications and other text documents, but also a working prototype of the sensor is made. As part of the course work, chemists-technologists design a workshop for large- and medium-tonnage chemical production and develop a complete set of design documentation for one of the main apparatuses of this workshop. Based on the created 3D models, students print a model of the apparatus on a 3D printer. As part of the "Fundamentals of Design" course, some students develop design documentation and make one of the two printed circuit boards of a dog robot based on it. Another part of the students creates 3D models of robot parts and prints them on a 3D printer. Both groups jointly assemble and program a robot dog.
practice-oriented learning, course project, design documentation, 3D model, diagram, functional diagram, circuit diagram, assembly drawing, apparatus, geoinformatics
1. Abrosimov S.N., Tihonov-Bugrov D.E. Proyektno-konstruktorskoye obucheniye inzhenernoy grafike: vchera, segodnya, zavtra [Design training in engineering graphics: yesterday, today, tomorrow]. Geometriya i grafika [Geometry and graphics]. 2015, V. 3, I. 3, pp. 47-57. DOI:https://doi.org/10.12737/14419. (in Russian)
2. Abrosimov S.N., Tihonov-Bugrov D.E. Proyektnoye obucheniye i konstruirovaniye kak neot"yemlemyye chasti sovremennogo tekhnicheskogo obrazovaniya [Project-based learning and design as integral parts of modern technical educatio]. Sbornik «Innovatsionnyye tekhnologii i tekhnicheskiye sredstva spetsial'nogo naznacheniya» trudy desyatoy nauchno-prakticheskoy konferentsii. Ser. «Biblioteka zhurnala Voyenmekh. Vestnik BGTU». [Collection "Innovative technologies and technical means of special purpose" Proceedings of the tenth scientific and practical conference. Ser. “Library of the journal Voenmekh. Bulletin of BSTU]. 2018, I. 43, pp. 134-138. (in Russian)
3. Abrosimov S.N., Butkarev A.G., Tihonov-Bugrov D.E. Elementy geometricheskogo konstruirovaniya v «Inzhenernoy i komp'yuternoy grafike» [Elements of Geometric Design in "Engineering and Computer Graphics"]. Tendentsii razvitiya nauki i obrazovaniya [Trends in the development of science and education]. 2021, I. 78-2, pp. 32-35. (in Russian)
4. Bojkov A.A. Konstruktivnyye geometricheskiye modeli i ikh primeneniye v proyektno-konstruktorskoy deyatel'nosti [Constructive geometric models and their application in design activities]. Trudy Mezhdunarodnoy konferentsii po komp'yuternoy grafike i zreniyu «Grafikon» [Proceedings of the International Conference on Computer Graphics and Vision "Grafikon"]. 2021, I. 31, pp. 38-46. (in Russian)
5. Bojkov A.A. Osnovnyye napravleniya reorganizatsii kursa graficheskikh distsiplin v usloviyakh komp'yuterizatsii uchebnogo protsessa [The main directions of the reorganization of the course of graphic disciplines in the conditions of computerization of the educational process]. Sbornik materialov VIII Vserossiyskoy nauchno-prakticheskoy konferentsii "Osnovnyye napravleniya reorganizatsii kursa graficheskikh distsiplin v usloviyakh komp'yuterizatsii uchebnogo protsessa" [Collection of materials of the VIII All-Russian scientific-practical conference "The main directions of the reorganization of the course of graphic disciplines in the conditions of computerization of the educational process"]. 2017 pp. 427-431. (in Russian)
6. Bojkov A.A., Orlova E.V., CHernova A.V., SHkilevich A.A. O sozdanii fraktal'nykh obrazov dlya dizayna i poligrafii i nekotorykh geometricheskikh obobshcheniyakh, svyazannykh s nimi [On the creation of fractal images for design and printing and some geometric generalizations associated with them]. Problemy kachestva graficheskoy podgotovki studentov v tekhnicheskom vuze: traditsii i innovatsii [Problems of quality graphic preparation of students in a technical college: tradition and innovation]. PGTU Publ., 2019, V. 1, pp. 325-339. (in Russian)
7. Bojkov A.A., Malahov D.A. Tochnoye predstavleniye paraboly v SAPR «Kompas-3D» pri pomoshchi krivoy Bez'ye [Accurate representation of a parabola in CAD "Compass-3D" using a Bezier curve]. Sbornik materialov VIII Vserossiyskoy nauchno-prakticheskoy konferentsii. «Nadezhnost' i dolgovechnost' mashin i mekhanizmov» [Collection of materials of the IX All-Russian scientific-practical conference. «Reliability and durability of machines and mechanisms»]. Ivanovo, 2018, rr. 407-411. (in Russian)
8. Bocharova I.N., Demidov S.G. Organizatsiya kontrolya znaniy studentov po inzhenernoy grafike v tekhnicheskom universitete [Organization of control of students' knowledge in engineering graphics at a technical university]. Mezhdunarodnyy zhurnal gumanitarnykh i yestestvennykh nauk [International Journal of the Humanities and Natural Sciences]. 2020, I.5-3(44), rr. 102-104. (in Russian)
9. Voronina M.V., Moroz O.N. «Perevornutyy» kurs inzhenernoy geometrii i komp'yuternoy grafika ["Inverted" course of engineering geometry and computer graphics]. Geometriya i grafika [Geometry and graphics]. 2017, V. 5, I. 4, pp. 52-67. DOI: 10.12737/ article_5a1800312afad8.68723389. (in Russian)
10. Vyshnepol'skij V.I., Rodionov A.S., Polevoda YU.A. Datchik protechki [Leak sensor]. Sbornik nauchnykh statey po materialam VI Mezhdunarodnoy nauchno-prakticheskoy konferentsii "Aktual'nyye problemy i perspektivy razvitiya radiotekhnicheskikh i infokommunikatsionnykh sistem "Radioinfokom-2022" [Collection of scientific articles based on materials VI International scientific-practical conference "Actual problems and prospects for the development of radio engineering and infocommunication systems "Radioinfocom-2022"]. Moscow. 2022, pp. 639-641. (in Russian)
11. Vyshnepol'skij V.I., Verbickij R.A., Efremov A.V. Kursovoye proyektirovaniye s primeneniyem praktiko-oriyentirovannogo obucheniya na kafedre inzhenernoy grafiki RTU MIREA dlya studentov radiotekhnicheskikh spetsial'nostey [Course design using practice-oriented training at the Department of Engineering Graphics of the RTU MIREA for students of radio engineering specialties]. Sbornik nauchnykh statey po materialam V Mezhdunarodnoy nauchno-prakticheskoy konferentsii "Aktual'nyye problemy i perspektivy razvitiya radiotekhnicheskikh i infokommunikatsionnykh sistem "Radioinfokom-2021" [Collection of scientific articles based on materials V International scientific-practical conference "Actual problems and prospects for the development of radio engineering and infocommunication systems "Radioinfocom-2021"]. Moscow. 2021, pp. 686-691. (in Russian)
12. GOST 2.702-2011. YESKD. Pravila vypolneniya elektricheskikh skhem [GOST 2.102-2013. ESKD. Rules for the execution of electrical circuits]. Moscow, Standartinform Publ., 2011. (in Russian)
13. Ivanova M.A., Klimenkova S.B., Voronina E.YU. Razvitiye konstruktivno-geometricheskogo myshleniya pri tvorcheskoy rabote uchashchikhsya v protsesse izucheniya inzhenernoy grafika [The development of constructive-geometric thinking in the creative work of students in the process of studying engineering graphics]. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta [Bulletin of the Irkutsk State Technical University]. 2012, I. 5(64), pp. 41-53 (in Russian)
14. Kadykova N.S., Rustamyan V.V. Kursovaya rabota na kafedre inzhenernoy grafika [Coursework at the Department of Engineering Graphics]. Doklad na yezhegodnom Vserossiyskom nauchno-metodicheskom seminare «Geometriya i grafika» 23-24 iyunya 2022 goda [Report at the annual All-Russian scientific and methodological seminar "Geometry and Graphics" June 23-24, 2022]. URL: https://rutube.ru/video/acfc5053609eeaa2a079965b3daa9e51/?playlist=208865
15. Kuldybaev A.K. Sovremennyy praktiko-oriyentirovannyy podkhod k osushchestvleniyu prepodavaniya inzhenernoy grafika [Modern practice-oriented approach to the implementation of teaching engineering graphics]. Pedagogika i psikhologiya [Pedagogy and psychology]. 2021, I. 4(49), pp. 148-159. (in Russian)
16. Loginovskij A.N., Hmarova L.I., Usmanova E.A. Formirovaniye i razvitiye professional'nykh navykov studentov v kurse nachertatel'noy geometrii [Formation and development of professional skills of students in the course of descriptive geometry]. Geometriya i grafika [Geometry and graphics]. 2015, V. 3, I. 2, pp. 46-51. DOI:https://doi.org/10.12737/12168. (in Russian)
17. Parvulyusov YU.B. Primeneniye komp'yuternoy grafiki pri kursovom proyektirovanii opticheskikh priborov [The use of computer graphics in the course design of optical devices]. Geometriya i grafika [Geometry and graphics]. 2014, V. 2, I. 1, pp. 42-45. DOI: 10.12737/ (in Russian)
18. Tomilin S.A., Ol'hovskaya R.A., Fedotov A.G. Obespecheniye proizvodstvennoy napravlennosti protsessa obucheniya inzhenernoy grafike praktiko-oriyentirovannykh bakalavrov [Ensuring the production orientation of the process of teaching engineering graphics for practice-oriented bachelors]. Nauchno- metodicheskiy elektronnyy zhurnal Kontsept. [Scientific and methodical electronic journal Concept]. 2016, I. 3, pp. 86-90. (in Russian)
