REVERSE ENGINEERING IS AN EFFECTIVE TOOL FOR TEACHING ENGINEERING GRAPHICS
Abstract and keywords
Abstract (English):
This study proposes the introduction of reverse engineering technology into a graphic workshop in the discipline «Engineering Graphics». The purpose of this study was the scientific and methodological substantiation of the need to use reverse engineering in the methodology of teaching engineering graphics. The article considers the concept of «reverse engineering», its application for solving engineering problems and in the educational process. It is shown that reverse engineering of a part and a sketch of a part are used in solving issues of production organization, in pilot production, repair and other cases, to solve similar and sometimes identical engineering problems. It has been suggested that the technology of reverse engineering in production conditions can replace the function of sketching a part. In the educational process for some areas of training, it is proposed to consider reverse engineering of the part in addition to the topic “part sketch”. A comparison is made of the use of reverse engineering technology and part sketching to solve the engineering problem of obtaining a three-dimensional digital model of a part. As part of the educational process, it is proposed to consider it as a situational or complex task. The scientific and methodological substantiation of the need to use reverse engineering in the methodology of teaching engineering graphics is based on the results of the experiment, which included parallel operations of reverse engineering and part sketching.

Keywords:
reverse engineering, 3d scanner, 3d scanning, design, engineering tasks,; part sketching, 3d model
References

1. Boyashova E.P. Features of distance learning in geometric and graphic disciplines using methods of constructive geometric modeling [Osobennosti distantsionnogo obucheniya geometro-graficheskim distsiplinam s ispol'zovaniyem metodov konstruktivnogo geometricheskogo modelirovaniya]. Geometriya i grafika [Geometry and graphics]. 2021. V. 9. I. 3. pp. 46-56. DOI:https://doi.org/10.12737/2308-4898-2021-9-3-46-56. (in Russian)

2. Vavulin M.V. 3D digitizing of large separate artifacts [Tekhnologii trekhmernoy otsifrovki krupnykh avtonomnykh arkheologicheskikh ob"yektov]. Vestnik Tomskogo gosudarstvennogo universiteta [Bulletin of Tomsk State University]. 2016. I. 407. pp. 55-60. (in Russian)

3. Grishaev A.N.. Lutseikovich V.I. Metodika i praktika 3d-skanirovaniya ob"yektov v zadachakh revers-inzhiniringa [Methods and practice of 3d-scanning of objects in reverse engineering tasks]. Materialy dokladov 51-y mezhdunarodnoy nauchno-tekhnicheskoy konferentsii prepodavateley i studentov [Materials of reports of the 51st international scientific and technical conference of teachers and students. (Vitebsk. April 25. 2018)]. 2018. V. 2. pp. 309-311. (in Russian)

4. Zaytseva O.V. 3D Revolution'' In Archaeological Recording In Russian Perspective [«3D revolyutsiya» v arkheologicheskoy fiksatsii v rossiyskoy perspective]. Sibirskiye istoricheskiye issledovaniya [Siberian historical research]. 2014. I. 4. pp.10-20. (in Russian)

5. Zobov P.G.. Dektyarev A.V.. Morozov V.N. Comparatative analysis of the scanning of small-sized shipboard products of an engineering part with a complex internal structure using various models of 3d scanners [Sravnitel'nyy analiz skanirovaniya melkogabaritnykh sudovykh izdeliy mashinostroitel'noy chasti so slozhnoy vnutrenney konstruktsiyey pri pomoshchi razlichnykh modeley 3D-skanerov]. Izvestiya KGTU [News of KSTU]. 2020. I. 56. pp. 159-171. (in Russian)

6. Ignat'ev S.A.. Muratbakeev E.H. Voronina M.V. Increasing the visibility of representation for objects studying in descriptive geometry [Povysheniye naglyadnosti predstavleniya izuchayemykh v nachertatel'noy geometrii ob"yektov]. Geometriya i grafika [Geometry and graphics]. 2022. V. 10. I. 1. pp. 44-53. DOI:https://doi.org/10.12737/2308-4898-2022-10-1-44-53. (in Russian)

7. Karavaev Ya.S.. Novikov V.Yu. Increasing productivity by sieving not fit oversized cast billets by 3d scanning [Uvelicheniye proizvoditel'nosti krupnogabaritnykh litykh detaley v mashinostroyenii putem otseivaniya negodnykh zagotovok s pomoshch'yu 3B-skanirovaniya]. Gornyy informatsionno-analiticheskiy byulleten' (nauchno-tekhnicheskiy zhurnal) [Mining information and analytical bulletin (scientific and technical journal)]. 2017. I. 1. pp. 104-108. (in Russian)

8. Kokovina M.V. Additive technologies in fashion design. the use of reverse engineering to simplify 3D modeling and printing from pla plastic to create corporate identity elements and accessories [Additivnyye tekhnologii v dizayne modnykh izdeliy. primeneniye revers-inzhiniringa dlya uproshcheniya 3D modelirovaniya i pechati iz pla plastic dlya sozdaniya elementov firmennogo stilya i aksessuarov]. Sbornik trudov mezhdunarodnoy nauchno-prakticheskoy konferentsii «innovatsii i dizayn» [Collection of proceedings of the international scientific and practical conference «innovations and design»]. 2020. I. 1. pp. 55-57. (in Russian)

9. Korzhov E.G.. Pavlov Yu.A. Computer technologies of reengineering for the production and restoration of sculptural objects [Komp'yuternyye tekhnologii reinzheniringa dlya proizvodstva i restavratsii skul'pturnykh ob"yektov]. Gornyy informatsionno-analiticheskiy byulleten' (nauchno-tekhnicheskiy zhurnal) [Mining information and analytical bulletin (scientific and technical journal)]. 2010. I. 3. pp. 230-239. (in Russian)

10. Kurkin E.I.. Sadykova V.O.. Spirina M.O. Multi-level approach for aerospace design from perspective materials [Mnogourovnevyy podkhod pri proyektirovanii konstruktsiy aerokosmicheskogo naznacheniya iz perspektivnykh materialov]. Reshetnevskiye chteniya [Reshetnev readings]. 2017. no. 21-1. pp. 26-27. (In Russian)

11. Leparov M.N. About the science «geometry of technical objects» [O nauke «Geometriya tekhnicheskikh ob"yektov»]. Geometriya i grafika [Geometry and graphics]. 2019. V. 7. I. 2. pp. 28-38. DOI:https://doi.org/10.12737/article_5d2c187251b6c8.21632403. (in Russian)

12. Leparov M.N. About geometry. one more time [O geometrii. yeshche odin raz]. Geometriya i grafika [Geometry and graphics]. 2022. V. 10. I. 1. pp. 3-13. DOI:https://doi.org/10.12737/2308-4898-2022-10-1-3-13. (in Russian)

13. Medvedev O.A.. Tarakanov A. Yu. Sposob lazernogo 3D skanirovaniya operativnogo opredeleniya stepeni deformirovannosti sooruzheniya. imeyushchego slozhnuyu konstruktivnuyu formu [Method of laser 3d scanning of operative definition of deformation degree of structure having complex structural shape]. Patent RF. I. 2572056. 2015. (in Russian)

14. Musaeva T.V.. Urago A.A. Augmented reality in conducting classes in engineering and technical disciplines of design [Dopolnennaya real'nost' v provedenii zanyatiy po inzhenernym tekhnicheskim distsiplinam proyektirovaniya]. Geometriya i grafika [Geometry and graphics]. 2021. V. 9. I. 2. pp. 46-55. DOI:https://doi.org/10.12737/2308-4898-2021-9-2-46-55. (in Russian)

15. Nazarova O.N. «Applied geometry» discipline adaptation to undergraduate for exploitative specialities of an aviation high educational institution [Adaptatsiya distsipliny «prikladnaya geometriya» k programmam bakalavriata ekspluatatsionnykh napravleniy aviatsionnogo vuza]. Geometriya i grafika [Geometry and graphics]. 2020. V. 8. I. 1. pp. 57-64. DOI:https://doi.org/10.12737/2308-4898-2020-57-64. (in Russian)

16. Nikitin V.S. R&D support to ship design and construction [Nauchno-tekhnicheskoye soprovozhdeniye sozdaniya korabley i sudov]. Trudy Krylovskogo gosudarstvennogo nauchnogo tsentra [Proceedings of the Krylovsky State Scientific Center]. 2018. I. 1 (383). pp. 5-12. (in Russian)

17. Nikonova T.Yu.. Mukhamedyarov D.Z.. Kuznetsov N.S. Using CAD to process the results of scanning with a HandySCAN 300 3D scanner of machine building parts [Ispol'zovaniye SAPR dlya obrabotki rezul'tatov skanirovaniya 3D-skanerom HandySCAN 300 detaley mashinostroyeniya] Available at: http://sci-conf.ru/archive/VIII/articles/nikonova-t-yu-ispolzovanie-sapr-dlya-obrabotki-rezultatov-skanirovaniya-3d-skanerom-handyscan-300-detaley-mashinostroeniya.pdf (Accessed: 13 August 2022). (in Russian)

18. Petrov A.L.. Baeva L.S.. Petrova N.E.. Kumova Zh.V. Application of reverse engineering technology in shipbuilding [Primeneniye tekhnologii revers-inzhiniringa v sudostroyenii]. Izvestiya vysshikh uchebnykh zavedeniy. Arkticheskiy region [News of higher educational institutions. Arctic region]. 2020. I. 1. pp. 34-37. (in Russian)

19. Sal'kov N.A. The geometric component of technical innovations [Geometricheskaya sostavlyayushchaya tekhnicheskikh innovatsiy]. Geometriya i grafika [Geometry and graphics]. 2018. V. 6. I. 2. pp. 85-93. DOI:https://doi.org/10.12737/article_5b55a5163fa053.07622109. (in Russian)

20. Skripnichuk E.V.. Reshetnikova E.S. Reverse engineering [Reversivnyy inzhiniring]. Tekhnologii metallurgii. mashinostroyeniya i materialoobrabotki [Technologies of metallurgy. mechanical engineering and material processing]. 2021. I. 20. pp. 238-245. (in Russian)

21. Stolbova I.D.. Nosov K.G.. Tarasova L.S. To the question of teaching staff readiness to digital training [K voprosu o gotovnosti prepodavatel'skikh kadrov k tsifrovomu obucheniyu]. Geometriya i grafika [Geometry and graphics]. 2022. V. 10. I. 1. pp. 24-35. DOI:https://doi.org/10.12737/2308-4898-2022-10-1-24-35. (in Russian)

22. Timoshev P.V.. Tonshina A.V. Application 3d scanning technology for production of space rocket engineering products [Primeneniye tekhnologii 3D skanirovaniya pri proizvodstve izdeliy raketno-kosmicheskoy tekhniki]. Aktual'nyye problemy aviatsii i kosmonavtiki [Actual problems of aviation and astronautics]. 2019. pp. 283-285. (in Russian)

23. Turutina T.F. Tret'yakov D.V. Application of information technologies in checking procedure of future specialists’ graphic literacy [Primeneniye informatsionnykh tekhnologiy v metodike proverki graficheskoy gramotnosti budushchikh spetsialistov]. Geometriya i grafika [Geometry and graphics]. 2020. V. 8. I. 1. pp. 45-56. DOI:https://doi.org/10.12737/2308-4898-2020-45-56. (in Russian)

24. Usataya T.V.. Deryabina L.V.. Reshetnikova E.S. Modern approaches to products design in the process of students teaching in computer graphics [Sovremennyye podkhody k proyektirovaniyu izdeliy v protsesse obucheniya studentov komp'yuternoy grafike]. Geometriya i grafika [Geometry and graphics]. 2019. V. 7. I. 1. pp. 74-82. DOI:https://doi.org/10.12737/article_5c91fd2bde0ff7.07282102. (in Russian)

25. Shabliy L.S. Sompressor blade profile reverse-engineering: building of middle curve and symmetrical profile [Revers-inzhiniring kompressornogo lopatochnogo profilya: postroyeniye sredney linii i simmetrichnogo profilya]. Vestnik Samarskogo gosudarstvennogo aerokosmicheskogo universiteta» («Vestnik SGAU») [Vestnik of the Samara State Aerospace University” (“Vestnik SSAU”)]. 2012. pp. 229-234. (In Russian)

26. Shestopalov K.K.. Novikov A.N. Fundamentals of computer-aided design [Osnovy avtomatizirovannogo proyektirovaniya]: textbook. Allowance. 2nd ed.. corrected. Moscow. Publ. MADI. 2017. 96 p. (in Russian)

27. Shirshova I.A.. Mukhina M.L. Modern approaches to the formation of geometric and graphic training in technical universities [Sovremennyye podkhody k formirovaniyu geometro-graficheskoy podgotovki v tekhnicheskikh vuzakh]. Nauchno-metodicheskiy elektronnyy zhurnal «Kontsept» [Scientific and methodological electronic journal "Concept"]. 2017. I. V8. Available at: http://e-koncept.ru/2017/171004.htm (Accessed: 16 August 2022). (in Russian)

28. D?brav??k M.. Kender ?. Application of Reverse Engineering Techniques in Mechanics System Services. Procedia Engineering. 2012. I. 48. pp. 96-104. DOI:https://doi.org/10.1016/j.proeng.2012.09.491

29. Elizondo A.. Reinert F. Limits and hurdles of Reverse Engineering for the replication of parts by Additive Manufacturing (Selective Laser Melting). Procedia Manufacturing. 2019. I. 41. pp. 1009-1016. DOI:https://doi.org/10.1016/j.promfg.2019.10.027.1

30. Engel B.. Al-Maeeni S.S.H. An Integrated Reverse Engineering and Failure Analysis Approach for Recovery of Mechanical Shafts. Procedia CIRP. 2019. I. 81. pp. 1083-1088. DOI:https://doi.org/10.1016/j.procir.2019.03.257

31. Paulic M.. Irgolic T.. Balic J.. Cus F.. Cupar A.. Brajlih T.. Drstvensek I. Reverse Engineering of Parts with Optical Scanning and Additive Manufacturing. Procedia Engineering. 2014. I. 69. pp. 795-803. DOI:https://doi.org/10.1016/j.proeng.2014.03.056

32. Wang P.. Yang J.. Hu Y.. Huo J.. Feng X. Innovative design of a helmet based on reverse engineering and 3D printing. Alexandria Engineering Journal. 2021. I. 60. pp. 3445-3453. DOI:https://doi.org/10.1016/j.aej.2021.02.006

Login or Create
* Forgot password?