Russian Federation
The question of teaching staff readiness to digitalize the educational process is considered in this paper. Digital education is a prerequisite for training of specialists meeting the requirements for the XXI century digital economy. There are a number of challenges in introducing digital learning, including those in engineering education. Digitalization of the technical subject area is very costly process that has its own specifics and requires developers to possess not only professional competencies related to a particular discipline, but also to be advanced in the arear of information and communication technologies. Besides modern teaching and laboratory facilities, and computer systems for various purposes, an important condition for promoting of digitization in subject teaching is teaching staff willingness to improve their teaching skills along with fluency in modern digital technologies. As an example of subject teaching, in this paper are considered informatization and digitalization of basic geometric and graphic training for students at technical higher education institutes. The analysis is carried out from the point of view related to preparation of the academic teaching staff for creation and implementation of the educational environment that meets the requirements for dynamically developing design as a type of engineering activity. The scheme for realization of mixed learning has been presented, which introduction is determined by students' individual work implementation, and the process of students' online geometric-graphic training during self-isolation for COVID-19 prevention has been described. An analysis of teacher's activity content increase in the full online training mode has been carried out. Has been presented a set of practical measures acting to raise the chair’s teaching staff qualification and providing readiness to solving urgent problems of students’ learning through the digital educational environment. As a conclusion of the study, it is stated that in digitalization conditions the most successful form for implementing of basic geometric and graphic training is the form of blended learning.
digital educational environment, subject teaching, basic geometric and graphic training, teaching staff development
1. Abrosimov S.N. Proektno-konstruktorskoe obuchenie inzhenernoy grafike: vchera, segodnya, zavtra [Tekst] / S.N. Abrosimov, D.E. Tihonov-Bugrov // Geometriya i grafika. - 2015. - T. 3. № 3. - C. 47-57. - DOI:https://doi.org/10.12737/14419.
2. Amirdzhanova I.Yu. Sovremennoe sostoyanie razvitiya geometro-graficheskoy kul'tury i kompetentnosti buduschih specialistov [Tekst] / I.Yu. Amirdzhanova, V.G. Vitkalov // Vektor nauki TGU. - 2015. - № 2 (32-2). - S. 26-31.
3. Andreeva G.N Kadry i obrazovanie kak klyuchevye faktory razvitiya cifrovoy ekonomiki [Tekst] / G.N. Andreeva [i dr.]. // Razvitie cifrovoy ekonomiki v Rossii kak klyuchevoy faktor ekonomicheskogo rosta i povysheniya kachestva zhizni naseleniya. - Nizhniy Novgorod: Izd-vo «Professional'naya nauka», 2018. - Gl. 3. - S.50-80.
4. Bogoslovskiy V.I. Konceptual'nye osnovy vysshego obrazovaniya v usloviyah cifrovoy ekonomiki [Tekst] / V.I. Bogoslovskiy, A.L. Busygina, V.N. Anis'kin // Samarskiy nauchnyy vestnik. - 2019. - T. 8 - № 1 (26). - S. 223-230. - DOI:https://doi.org/10.24411/2309-4370-2019-11301.
5. Boyashova E.P. Osobennosti distancionnogo obucheniya geometro-graficheskim disciplinam s ispol'zovaniem metodov konstruktivnogo geometricheskogo modelirovaniya [Tekst] / E.P. Boyashova // Geometriya i grafika. - 2021. - T. 9. - № 3. - S. 46-56. - DOI:https://doi.org/10.12737/2308-4898-2021-9-3-46-56.
6. Verbickiy A.A. Cifrovoe obuchenie: problemy, riski i perspektivy [Elektronnyy resurs] / A.A. Verbickiy // Elektronnyy nauchno-publicisticheskiy zhurnal "Homo Cyberus". - 2019. №1(6). - URL: http://journal.homocyberus.ru/Verbitskiy_AA_1_2019.
7. Danilov A.N. Ocenka kachestva podgotovki inzhenernyh kadrov k innovacionnoy deyatel'nosti [Tekst] / A.N. Danilov, E.K. Gitman, I.D. Stolbova // Standarty i kachestvo. - 2012. - № 8. - S. 74-78.
8. Damchaasuren H. Vnedrenie elektronnoy tehnologii v obrazovanie / H. Damchaasuren // Geometriya i grafika. - 2021. - T. 9. - № 3. - S. 39-45. - DOI:https://doi.org/10.12737/2308-4898-2021-9-3-39-45.
9. Zaharov A.A. Soderzhanie kursa «geometricheskoe modelirovanie» dlya napravleniya podgotovki «matematika i komp'yuternye nauki» [Tekst] / A.A. Zaharov, Yu.V. Zaharova // Geometriya i grafika. - 2021. - T. 9. - № 4. - S. 35-45. - DOI:https://doi.org/10.12737/2308-4898-2022-9-4-35-45.
10. Ignat'ev S.A. Vizualizaciya zadach nachertatel'noy geometrii posredstvom Wolfram Mathematica [Tekst] / S.A. Ignat'ev, A.I. Folomkin, E.H. Muratbakeev // Geometriya i grafika. - 2020. - T. 8. - № 4. - S. 74-84. - DOI:https://doi.org/10.12737/2308-4898-2021-8-4-74-84.
11. Ignat'ev S. A. Tehnologii dopolnennoy real'nosti v proektnoy deyatel'nosti studentov [Tekst] / S.A. Ignat'ev, Z.O. Tret'yakova, M.V. Voronina // Geometriya i grafika. - 2020. - T. 8. - № 2. - S. 51-57. - DOIhttps://doi.org/10.12737/2308-4898-2020-51-57.
12. Innovacionnye podhody v obuchenii: po stranicam internet-konferenciy [Tekst] / I.D. Stolbova, O.V. Stolbov, E.P. Aleksandrova, L.V. Kochurova // Vysshee obrazovanie segodnya. - 2015. - № 9. - S. 24-29.
13. Kudinov I.V. Informacionnye tehnologii v professional'nom pedagogicheskom obrazovanii [Tekst] / I.V. Kudinov // Vestnik Chelyabinskogo gosudarstvennogo pedagogicheskogo universiteta. Seriya: Pedagogicheskie nauki. - 2018. - № 3. - S. 89-101. - DOIhttps://doi.org/10.25588/CSPU.2018.03.10.
14. Laletin V.A. Aktualizaciya informacionno-kommunikacionnoy kompetentnosti prepodavateley v srede internet-konferencii [Tekst] / V.A. Laletin, I.D. Stolbova, O.V. Stolbov // Alma mater (Vestnik vysshey shkoly). - 2011. - № 1. - S. 54-59.
15. Loginova S.L. Rol' prepodavatelya vuza v usloviyah cifrovizacii vysshego obrazovaniya [Tekst] / S.L. Loginova // V sbornike: Akmeologiya professional'nogo obrazovaniya Materialy 15-y Mezhdunarodnoy nauchno-prakticheskoy konferencii. - 2019. - S. 173-177.
16. Musaeva T. V. Dopolnennaya real'nost' v provedenii zanyatiy po inzhenernym tehnicheskim disciplinam proektirovaniya [Tekst] / T.V. Musaeva, A.A. Urago // Geometriya i grafika. - 2021. - T. 9. - № 2. - S. 46-55. - DOIhttps://doi.org/10.12737/2308-4898-2021-9-2-46-55.
17. Nikulina T.V. Informatizaciya i cifrovizaciya obrazovaniya [Tekst] / T.V. Nikulina, E.B. Starichenko // Pedagogicheskoe obrazovanie v Rossii. - 2018. - № 8. - S. 107-113. - DOIhttps://doi.org/10.26170/po18-08-15.
18. O koncepcii razrabotki novyh federal'nyh gosudarstvennyh obrazovatel'nyh standartov vysshego obrazovaniya [Tekst] / E.K. Gitman, M.B. Gitman, V.Yu. Stolbov, I.D. Stolbova // Vysshee obrazovanie v Rossii. - 2014. - № 5. - S. 46-54.
19. Prihod'ko V.M. Inzhenernaya pedagogika kak osnova kadrovogo obespecheniya vysshego tehnicheskogo obrazovaniya [Tekst] / V.M. Prihod'ko, A.N. Solov'ev // Vysshee obrazovanie v Rossii. - 2014. - №3. - S.5-11.
20. Razrabotka i ispol'zovanie FOS v kompetentnostnom formate dlya provedeniya promezhutochnoy attestacii po uchebnoy discipline [Tekst] / E.K. Gitman, M.B. Gitman, V.Yu. Stolbov, I.D. Stolbova // Vysshee obrazovanie v Rossii. - 2016. - № 8-9. - S. 74-83.
21. Sal'kov N. A. Kachestvo geometricheskogo obrazovaniya pri razlichnyh podhodah k metodike obucheniya [Tekst] / N. A. Sal'kov // Geometriya i grafika. - 2020. - T. 8. - № 4. - S. 47-60. - DOI:https://doi.org/10.12737/2308-4898-2021-8-4-47-60.
22. Safuanov R.M. Cifrovizaciya sistemy obrazovaniya [Tekst] / R.M. Safuanov, M.Yu. Lehmus, E.A. Kolganov // Vestnik UGNTU. Nauka, obrazovanie, ekonomika. Seriya «Ekonomika». - 2019. - №2 (28). - S.116-121. - DO:Ihttps://doi.org/10.17122/2541-8904-2019-2-28-108-113.
23. Sobolev A. B. Menyaysya ili uhodi. Cifrovoe obrazovanie brosaet vyzov prepodavatelyam vuza [Elektronnyy resurs] / A.B. Sobolev // Elektronnaya gazeta «Poisk». - 2018. - № 1-2. - URL: http://www.poisknews.ru/theme/edu/31969/.
24. Stolbova I.D. K voprosu o kachestve prepodavatel'skogo sostava [Tekst] / I.D. Stolbova, A.B. Shahova // V sbornike: Innovacionnye tehnologii v inzhenernoy grafike: problemy i perspektivy. Sbornik trudov Mezhdunarodnoy nauchno-prakticheskoy konferencii. - 2016. - S. 135-138.
25. Stolbova I.D. Logika innovaciy graficheskogo obrazovaniya [Tekst] / I.D. Stolbova, E.P. Aleksandrova, L.V. Kochurova // Otkrytoe i distancionnoe obrazovanie. - 2019. - № 2 (74). - S. 26-34. - DOI:https://doi.org/10.17223/16095944/2/4.
26. Stolbova I.D. Metod proektov v organizacii graficheskoy podgotovki [Tekst] / I.D. Stolbova, E.P. Aleksandrova, K.G. Nosov // Vysshee obrazovanie v Rossii. - 2015. - № 8-9. - S. 22-31.
27. Stolbova I.D. Organizaciya upravleniya graficheskim obrazovaniem v usloviyah cifrovizacii [Tekst] / I.D. Stolbova, E.P. Aleksandrova, L.V. Kochurova // Informatika i obrazovanie. - 2019. - № 9 (308). - S. 47-55. - DOI:https://doi.org/10.32517/0234-0453-2019-34-9-47-55.
28. Sysoeva E.Yu. Lichnostno-orientirovannye tehnologii obucheniya v sisteme povysheniya kvalifikacii prepodavateley vuza [Tekst] / E.Yu. Sysoeva // Vysshee obrazovanie v Rossii. - 2014. - № 12. - S. 42-47.
29. Tihonov-Bugrov D.E. Distancionnaya lyubov' ili obuchenie graficheskim disciplinam v usloviyah pandemii [Tekst] / D.E. Tihonov-Bugrov, S.N. Abrosimov // Geometriya i grafika. - 2020. - T. 8. - № 3. - S. 44-51. - DOI:https://doi.org/10.12737/2308-4898-2020-44-51.
30. Shahova A.B. Opyt provedeniya internet-konferenciy po problemam kachestva graficheskoy podgotovki kak primer mezhvuzovskoy kooperacii [Tekst] / A.B. Shahova, I.D. Stolbova, O.V. Stolbov // Geometriya i grafika. - 2014. - T. 2. - № 3. - S. 17-24. - DOI:https://doi.org/10.12737/6521.
31. Elektronnaya obuchayuschaya sreda Moodle kak effektivnoe sredstvo organizacii obucheniya nachertatel'noy geometrii v usloviyah pandemii COVID-19 [Tekst] / S.A. Ignat'ev, A.I. Folomkin, Z.O. Tret'yakova, K.O. Glazunov // Geometriya i grafika. - 2020. - T. 8. - № 3. - S. 52-66. - DOI:https://doi.org/10.12737/2308-4898-2020-52-66.
32. Digital Economy: Innovation, Growth and Social Prosperity. OECD Ministerial Meeting. Cancun, Mexico 21-23 June 2016. Available at: http://www.oecd.org/internet/ministeri-al/STI-Cancun-2016-ENG.pdf .
33. Stolbova I.D., Shakhova A.B., Shirinkina M.A. Information Technologies Used for Geometro-graphic Training of Engineering Staff. Information Technologies in Engineering Education - INFORINO. 2018, pp. 53-56.
34. Laletin V.A., Stolbov O.V., Stolbova I.D. Upgrading of the information and communication competence of instructors in the environment of an internet conference // Russian Education and Society. 2012. V. 54. I. 5. pp. 65-76.
35. Stolbova I., Nosov K. About innovation practice within geometric-graphic training. CEUR Workshop Proceedings: 30, Saint Petersburg, 22-25 sentyabrya 2020 goda. Saint Petersburg, 2020.
36. Stolbova I. D., Aleksandrova E. P., Kochurova L. V., Nosov K. G. Profile aspects of graphic education at polytechnic university. Vysshee Obrazovanie v Rossii [Electronic resource]. 2019, V. 28, I. 3, pp. 155-166.
