Tula, Tula, Russian Federation
Tula, Tula, Russian Federation
The proportions for stress computation at the subsequent drawing of anisotropic billet under conditions of viscoplasticity are obtained. The equilibrium equations in stresses and a linear condition of fluidity are used. The impact of billet bending upon radial areas of a matrix and clamping and also friction is taken into account. The assessment of billet material damageability is carried out.
drawing, anisotropy, viscoplasticity, speed, stresses, force, material damageability
1. Isothermal Forming of Anisotropic Materials with Hard Tool in Mode of Shortterm Creep / S.S. Yakovlev [et al.]: monograph / under the editorship of S.S. Yakovlev. - M.: Mechanical Engineering, 2009. - pp. 412.
2. Dyomin, V.A., Chernyaev, A.V., Platonov, V.I., Korotkov, V.A. Procedure for experimental definition of mechanical and plastic properties of material at high-temperature drawing // Non-ferrous Metals. - 2019. - No.5. - pp. 66-73.
3. Malinin, N.N. Applied Theory of Plasticity and Creeping, 3-d Edition, Revised and Supplemented. - Moscow: Youright, 2020. - pp. 402.
4. Yakovlev, S.P., Yakovlev, S.S., Andreychenko, V.A. Anisotropic Material Shaping. - Kishinyov: Quant, 1997. - pp. 331.
5. Popov, E.A. Fundamentals of Sheet Metal Stamping Theory: college manual, 2-d edition revised and supplemented. - M.: Mechanical Engineering, 1977. - pp. 278.
6. Tregubov, V.I., Platonov, V.I., Nuzhdin, G.A., Korotkov, V.A. Technological Mode Definition of High-strength Metal Isothermal Deformation: monograph / under the editor-ship of S.N. Larin. - Tula: Tula SU Publishers, 2018. - pp. 136.
7. Chernyaev, A.V., Chudin, V.N., Tesakov, D.M. Assessment of anisotropic material damageability at heat drawing // Blacksmithing and Stamping Production. Material Pressure Shaping. - 2020. - No.12. - pp. 3-7.
