SINGLE-STAGE TECHNOLOGICAL SUPPORT AND MACHINERY CONTACT RIGIDITY INCREASE
Authors:
1.
Bryansk State Technical University
(Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
National Research Nuclear University “MEPhI” (Professor)
Bauman Moscow State Technical University (Professor)
Bryansk, Bryansk, Russian Federation
National Research Nuclear University “MEPhI” (Professor)
Bauman Moscow State Technical University (Professor)
Bryansk, Bryansk, Russian Federation
2.
Bryansk State Technical University
(Department "Automated Technological Systems", Associate Professor)
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
Type:
Article
Pages:
from 10
to 19
Status:
Published
Received:
28.03.2021
Accepted:
03.02.2022
Published:
03.02.2022
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
technological support, contact rigidity, engineering methods of treatment
Abstract (English):
The oretical and empirical dependences of contact rigidity in a fixed joint at the first and repeated loadings upon engineering methods of a joint surface treatment are presented. There are shown data on potentialities of engineering methods of treatment in support and increase of contact rigidity.
The oretical and empirical dependences of contact rigidity in a fixed joint at the first and repeated loadings upon engineering methods of a joint surface treatment are presented. There are shown data on potentialities of engineering methods of treatment in support and increase of contact rigidity.
Keywords:
technological support, contact rigidity, engineering methods of treatment
technological support, contact rigidity, engineering methods of treatment
1. Suslov, A.G. Technological Support of Joints Contact Rigidity. - M.: Science, 1977. - pp. 102.
2. Suslov, A.G. Technological Support and Increase of Operation Properties of Parts and Their Joints / under the general editorship of A.G. Suslov. - M.: Mechanical Engineering, 2006. - pp. 448.
3. Medvedev, D.M., Khandozhko, V.A. Single-stage tech-nological support of ground surface contact rigidity in machi-nery and parts joints // Bulletin of Soloviyov State Aircraft Technical University of Rybinsk. - 2015. - No.1(32). - pp. 82-89.
4. Bishutin, S.G. Support of Required Aggregate of Quality Parameters for Surface Layers of Parts when Grinding: mo-nograph. - M.: Mechanical Engineering - 1, 2004. - pp. 144.
