TECHNOLOGICAL SUPPORT OF OPERATION PROPERTIES IN FLAT SLIDING SURFACES
Authors:
1.
Bryansk State Technical University
(kafedra "Tehnologiya mashinostroeniya", assistent Prof.)
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
Type:
Article
Pages:
from 15
to 23
Status:
Published
Received:
23.12.2020
Accepted:
30.01.2021
Published:
30.01.2021
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
contact stiffness, flat surface, coating, sliding, quality, wear, experiment, roughness, run-in, correlation;,machining
Abstract (English):
There are shown experimental investigations of wear-resistance, contact stiffness and anti-friction properties of flat surfaces at their relative sliding. A technological support of quality parameters in flat friction surfaces after their sput-tering and strengthening is described.
There are shown experimental investigations of wear-resistance, contact stiffness and anti-friction properties of flat surfaces at their relative sliding. A technological support of quality parameters in flat friction surfaces after their sput-tering and strengthening is described.
Keywords:
contact stiffness, flat surface, coating, sliding, quality, wear, experiment, roughness, run-in, correlation;,machining
contact stiffness, flat surface, coating, sliding, quality, wear, experiment, roughness, run-in, correlation;,machining
1. Khasuy, A. Sputtering Technique. - M.: Mechanical Engineering, 1975. - pp. 288.
2. Suslov, A.G. Technological Support of Joints Contact Stiffness. - M.: Science, 1977. - pp. 104.
3. Levina, Z.M., Reshetov, D.N. Machine Contact Stiffness. - M.: Mechanical Engineering, 1971. - pp. 264.
4. Kostetsky, B.I. Friction and Wear in Machines. - Kiev: Engineering, 1970. - pp. 396.
5. Parts Surface Engineering / Author Group; under the editorship of A.G. Suslov. - M.: Mechanical Engineering, 2008. - pp. 320.
6. Suslov, A.G., Fyodorov, V.P., Gorlenko, O.A. et al. Technological Support and Operation Properties Increase in Parts and Their Joints / under the general editorship of A.G. Suslov. - M.: Mechanical Engineering, 2006. - pp. 448.
