Vladimir, Vladimir, Russian Federation
A well-known technology of machining weld surfaces in case parts of freight cars is analyzed. Its drawbacks are defined and eliminated by means of the development of techniques based on the use of high-capacity combined cutters. Combined cutters ensure a high-capacity machining of weld surfaces during one travel and zero back angles increase expensive hard-alloy plate life by a factor of two. Cutters are tested in the course of mentioned surface machining which confirmed their high efficiency.
machining, case part, weld surface, combined cutter, productivity.
1. Vasin, S.A. Prediction of Tool Vibration Resistance at Turning and Milling. - M.: Mechanical Engineering, 2006. - pp. 383.
2. Pat. No. 2457925 the RF, IPC V23V 29/034. Cutter / Gusev V.G., Selivanov A.M., Shvagirev P.S.; applied 08.04.2011, published 10.08.2012. Bull. No.22.
3. Gusev, V.G., Selivanov, A.M. Cutters for reducing ma-chining of holes with uneven allowance. Transactions of the Inter. Scientif. Pract. Conf. “Modern Materials, Engineering and Techniques”; Kursk; SWSU, 2011. - pp. 99-101. - ISBN 978-5-905556-05-0.
4. Morozov, V.V., Gusev, V.G. Parts Machining Pro-gramming on NC Modern Multifunctional Lathes: manual, Vladimir: Publishing House of Vladimir State University, 2009. - pp. 236 - ISBN 978-5-89368-979-2.
5. Morozov, V.V., Gusev, V.G. Parts Milling Program-ming on NC Modern Milling Machines: manual - Vladimir: Vladimir State University Publishers, 2010. - pp. 240. ISBN 978-5-9984-0025-4.
6. Morozov, V.V., Gusev, V.G. Programming of Parts Machining in Processing Centers: manual - Vladimir: Vladi-mir State University Publishers, 2011. - pp. 366 - ISBN 978-5-9984-0165-7.
7. Gusev, V.G., Lazarev, A.V., Selivanov, A.M. Simula-tion of cutter plate elastic motions at hole chamfering in COSMOS WORKS program // Fundamental and Applied Problems of Engineering and Technology. 2012. - No.2-6 (292). - pp. 86-91.
