TECHNOLOGICAL SUPPORT OF QUALITY IN LARGE DIAMETER PIPES WITH POLYETHYLENE COATING
Authors:
1.
Volgograd State Technical University
(kafedra "Tehnologiya mashinostroeniya", docent)
employee
Volgograd, Volgograd, Russian Federation
employee
Volgograd, Volgograd, Russian Federation
2.
Volgograd State Technical University
(kafedra "Tehnologiya mashinostroeniya", docent)
employee
Volgograd, Volgograd, Russian Federation
employee
Volgograd, Volgograd, Russian Federation
3.
Volgograd State Technical University
(kafedra "Tehnologiya mashinostroeniya", magistrant)
Volgograd, Volgograd, Russian Federation
Volgograd, Volgograd, Russian Federation
Type:
Article
Pages:
from 41
to 45
Status:
Published
Received:
13.01.2018
Accepted:
14.01.2018
Published:
14.01.2018
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian, English
Keywords:
cylindrical brushes, pipe coating, primer, polyethylene layer, surface quality
Abstract (English):
The paper reports the consideration of basic methods used at PC "Volga Pipe Plant" for processing large diameter pipe ends. Each of the methods used at the plant does not meet current requirements of the market that is why the necessity of a new processing method arose.
The paper reports the consideration of basic methods used at PC "Volga Pipe Plant" for processing large diameter pipe ends. Each of the methods used at the plant does not meet current requirements of the market that is why the necessity of a new processing method arose.
Keywords:
cylindrical brushes, pipe coating, primer, polyethylene layer, surface quality
cylindrical brushes, pipe coating, primer, polyethylene layer, surface quality
1. Office of Pipeline Safetyunder the Pipeline and Hazardous Materials Safety Administration - OPS PHMSA [Electronic resource]. URL: http//www.phmsa.dot.gov (accessed: 04.09.2013).
2. Aguirre-Vargas. F. / Novel technology to improve adhe-sion of fusion-bonded epoxy coating. DOW Coating Materials. [Electronic resource] - International conference «Pipeline Coat-ing 2012». - 1 (CD-ROM).
3. Romantsev, B.A., Goncharuk, A.V., Vavilkin, N.M. Pipe Production: textbook. - M.: RTU MISandA, - 2011. - pp. 970.
4. Pat. 2026119. The USSR: Method for Cylindrical Product Processing [Text]: IPC V08V1/04. Musyakin V.E.
5. Pat. 2145911. The RF: Device for External Surface Clean-ing in Pipe Line [Text]: IPC V08V009/023. Diyachkov A.V.
