TEMPERATURE SIMULATION OF BLANK GROUND WITH FACE SOLID AND SEGMENT DISKS IN CAE-SOLID WORKS COMPLEX
Abstract and keywords
Abstract (English):
Flat face grinding is characterized with large areas of a cutting surface contact with a blank under machining which re-sults in intensive heat generations in a cutting area which is able to cause a thermal damage of the surface layer. Thereupon there is developed a designed heat model of a blank, the initial conditions are defined, and there is created a solid-state model of an abrasive segment with a trapezoidal face cutting surface and a temperature simulation of the blank ground with a solid and discrete face tool is carried out in a modern CAE- Solid Works complex. The result of modeling have shown that the application of the discrete face grinding tool equipped with abrasive segments allows decreasing a temperature of the surface machined by 26-30% as compared to a face grinding tool with a solid cutting surface, which decreases considerably the likelihood of defects appearance in a ground surface layer of a part.

Keywords:
plane face grinding, abrasive segment, discrete cutting surface, temperature, computer simulation
Text
Publication text (PDF): Read Download
References

1. Gusev, V.G., Morozov, V.V. Plane Discrete Grinding Technology: textbook / under the editorship of V.G. Gusev, D. Eng., Prof. - Vladimir: Vladimir State University Publishing House, 2007. - pp. 344. ISBN 978-5-89368-825-2.

2. Morozov, A.V., Gusev, V.G. Discrete Plane Face Grinding: monograph. M.: “Pen” Publishing House, 2016. - pp. 124. - ISBN 978-5-906927-57-6.

3. Gusev, V.G., Shvagirev, P.S. Blank Temperature De-crease at Discrete Plane Grinding // STIN. - 2013. - No.4. - pp. 23-27.

4. Pat. No. 1634462 the RF. Abrasive Disk for Face Grinding.

5. Gusev, V.G., Morozov, A.V. Modelirovanie raspredeleniya teplovyh poley v zagotovke pri torcevom shlifovanii segmentami s pazami na bazovoy i periferiynoy poverhnostyah // Vestnik mashinostroeniya. - 2015. - №12. - S. 10 - 14.

6. Gusev, V.G., Morozov, A.V., Shvagirev, P.S. Discrete structure of the cutting surface of a grinding wheel (2009) Russian Engineering Research, 29(9), pp. 940-943.

7. Gusev, V.G., Morozov, A.V. Distribution of Thermal Fields in Face Grinding by Slotted Abrasive Segments (2016) Russian Engineering Research, Vol. 36, No. 3, pp. 169-173. ISSN 1068-798X.

8. Gusev, V.G., Morozov, A.V., Shvagirev, P.S. Aerody-namic flows generated by discrete face grinding disk: Proceedings of the Inter. Scientific-Tech. Conf. “Science on Material Cutting under Current Conditions”. (Series “Tool and Metrological Systems”) // Proceedings of Tula State University. Edition 1. Part 2. 2004. - pp. 74-79. - ISBN 5-7679-0585-1.

9. Gusev, V.G., Morozov, A.V. Technology of grinding disk operating surface discretization with laser and hydro-abrasive jet // Science Intensive Technologies in Mechanical Engineering. 2017. No.9(75). pp. 21-27.

10. Gusev, V.G., Morozov, A.V. Simulation of thermal fields distribution in blanks at face grinding by segments with slots on basic and peripheral surfaces // Bulletin of Mechanical Engineering. - 2015. - No.12. - pp. 10-14.

Login or Create
* Forgot password?