Ukraine
Doneck, Ukraine
Ukraine
The problems of planning and experiment setting, measuring equipment, tools and equipment used are described. There are shown results of experimental investigations of granite grinding process. A simulator for the assessment of the topography of a surface worked in a blank is developed. A method of technological impact at processing a blank by grinding and a design of an adaptive device are offered. The 3D model of an adaptive device for the flat grinding of a surface in a stone blank is developed. The description of the device components and its operation principles are shown.
quality, stone, experiment, investigation, topography, structure.
1. Natural Stone Extraction and Processing: Reference Book/ under the general editorship of A.G. Smirnov. - М.: Entrails, 1990. - pp. 445.
2. Gorobets, I.А., Mikhailov, А.N., Golubov, N.V. Analysis of cutting edge form impact in grinding disk upon efficiency in natural stone product treatment / Efficient Technologies and Mechanical Engineering Systems: the Inter. Proceedings. - Donetsk: DonNTU, 2008, Edition.35, pp. 49-58.
3. Husu, А.P., Witenberg, Yu.R., Palmov, V.А. Surface Roughness (Theoretical Probabilistic Approach). - М.: Science, 1975. - pp. 344.
4. Bishutin, S.G. Assurance of Quality Parameter Required Integrity for Surface Layers in Parts at Grinding: monograph. - М.:Mechanical Engineering-1, 2004. - pp. 144.
5. Grinding Control/ А.V. Yakimov, А.N. Parshakov, V.I. Svirshchev, V.P. - К.: Techniques, 1983. - pp. 184.
6. Machine Quality: reference book. In 2 Vol.. Vol.1. / А.G. Suslov, Yu.V. Brown, N.А. Vitkevich et al. - М.: Me-chanical Engineering, 1995. - pp. 256.
7. Suslov, А.G. Quality of Machine Surface Layers. - М.: Mechanical Engineering, 2000. - pp. 320.
8. Mikhailov, А.N., Gorobets, I.А., Baikov, А.V., Golu-bov, N.V., Ishchenko, А.L. Experimental plant for researches of processes in natural stone product grinding /Proceedings of Donetsk National Technical University. Series: Mechanical Engineering and Machine Science. Edition 92. - Donetsk, DonNTU 2005. pp. 164 - 174.
9. Gorobets, I.А., Mikhailov, А.N. Quality control of sur-face layer in blank worked./ Proceedings of Donetsk National Technical University. Series: Mechanical Engineering and Machine Science. Edition71. - Donetsk: DonNTU, 2004. - pp. 164 - 174.
10. Gorobez I., Navka I., Lapajeva I., Schaban K. Die Parameter der Adaptronsysteme der Drehmaschinen - Modern Technologies, Quality and Restructuring International Conference N.C.M.R - Bulletin of the Politechnic institute of Jassy, Iassy, Romania 23-25 of May 2002 , Vol. XLVIII. - Т.1. S.100-104.
