Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
employee
Moscow, Moscow, Russian Federation
UDC 656.2
The paper discusses the problem of rational choice of material and design for traction electric motors (TED) of diesel locomotives. The result of the analysis shows that metallic shock absorbers made of MP material have a longer service life (20 years) and fundamental possibilities for further increasing the load capacity compared to rubber-metal ones. The disadvantage of shock absorbers made of MP material in comparison with rubber-metal ones is the complexity of their manufacture, as well as the porosity of the material, which results in the necessity to protect shock absorbers made of MP material from moisture, dust and dirt metal when used in locomotive carriages. At the same time, shock absorbers made of MP material in TED suspension structure do not have key advantages over rubber-metal ones in terms of the possibility of reducing dynamic loads in the parts and assemblies of the carriage, due to the shock nature of the loads while passing butt track irregularities and the absence of resonant phenomena during locomotive movement. New technical solutions for TED suspension with two parallel sets of rubber-metal shock absorbers and with an annular metal elastic element are proposed. Two utility model patents are obtained for the proposed solutions.
locomotive, suspension, electric motor, hinge, reliability, construction
1. Biryukov IV, Belyaev AI, Rybnikov EK. Traction transmission of electric rolling stock. Moscow: Transport; 1986.
2. Alekseeva MS. Analysis of the operation of diesel locomotives of 2TE25A Vityaz series on the Far Eastern Railway. Collection of Papers of LVIII International Scientific and Practical Conference: Technical Sciences; Novosibirsk: SibAK; 2016. p. 61-66.
3. Sokolov YuN, Ponomarev AS, Degtyarev VE. Improving the reliability of traction drive units for passenger electric locomotives EP1M and EP10. Locomotive-inform. 2010;6:4-11.
4. Lazutkin GV, Parovai FV, Lazutkin GV, Parovai FV Some issues of designing and manufacturing vibration isolators made of wire material. VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2011;3(27):284-290.
5. Ermakov AI, Lazutkin GV, Parovai FV, Lazutkin GV, Parovai FV. Development of vibration isolators from MP to reduce vibration and noise in a gas turbine locomotive and their equivalent tests. VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;3(34):179-184.
6. Zhizhkin AM, Lazutkin GV, Volkova TV. Calculation of sleeve filter elements from MR material. VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2014;5(47):166-174.
7. Kosmodamiansky AS, Vorobyov VI, Izmerov OV, Kapustin MYu, Shevchenko DN. Search for new ways to improve the reliability of the traction motor suspension unit. Vestnik Transporta Povolzhya. 2019;6(78):19-26.
8. Poturaev VN. Rubber and rubber-metal machine parts. Moscow: Mashinostroenie; 1966.
9. Ulanov AM, Ponomarev YuK, Parovai FV. Characteristics of MR material under short-term significant loading. VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2008;3:130-134.
10. Research report I-25-15. Results of dynamic strength tests of the freight mainline diesel locomotive 2TE25A in the conditions of BAM. Kolomna; VNIKTI; 2015.
11. Mikhailov GI. Improving the reliability and bearing capacity of gear traction gears: monograph. Kazan: Algorithm+; 2023.
12. Electric locomotive 2ES4K. Calculation of the strength of shock absorber suspension of traction electric motor EDP810 2ES4K.31.400.000 PP.
13. Biryukov IV, Belyaev AI, Rybnikov EK. Traction transmission of electric rolling stock. Moscow: Transport; 1986.
14. Ryabkov AL. Dynamic properties of vibration isolators with spring-loaded and combined shock-resistant devices [abstract of dissertation]. [Kursk (RF)]; 2010.
15. Kosmodamiansky AS, Izmerov OV, Vorobyov VI, Korchagin VO, Pugachev AA, Kapustin MYu, Samotkanov AV, Shevchenko DN, Nikolaev EV, Karpov AE. Suspension unit of the traction electric motor. RF Patent for utility model No. 213277. SEC B60L 15/00; B60L 9/00. 05 Sept 2022.
16. Vorobyov VI, Kosmodamiansky AS, Izmerov OV, Pugachev AA, Samotkanov AV. Device for attaching traction electric motor of a locomotive to a bogie frame. RF Utility Patent No. 147194 MPK V61C 9/38. 27 Oct 2014.
