Аннотация и ключевые слова
Аннотация (русский):
One of the main requirements for ensuring a high level of safety and economic efficiency of nuclear power units at all stages of the life cycle - designing new ones, operating existing power units and decommissioning them - is a probabilistic safety analysis of nuclear power units. The most widely used method for probabilistic safety analysis is the fault tree method. NPP power units are a complex system consisting of a large number of units of equipment, systems and units that are interconnected functionally and affect each other. In addition, to increase the adequacy of the developed probabilistic model of a power unit, it is necessary to take into account equipment failures for general reasons and the human factor. The resulting in-depth probabilistic models of power units can contain tens of thousands of fault trees and, as a result, hundreds or more of thousands of minimum sections and require lengthy calculations to obtain acceptable accuracy of the results. This complicates the application of this method, especially when monitoring risk in real time, when it is necessary to promptly make changes to the model and assess the impact of these changes on the current risk. The novelty of the project is the use of a modified modularization method, which significantly accelerates the generation of many minimal sections.

Ключевые слова:
probabilistic safety analysis, NPP, fault trees, event trees
Список литературы

1. The main recommendations for the development of aprobabilistic safety analysis of level 1 for a nuclear powerplant unit at initiating events caused by external influencesof natural and technogenic origin. Safety Guide RB-021-14,Rostekhnadzor, 2014.

2. Recommendations on the procedure for performing thereliability analysis of systems and elements of nuclear plantsimportant for safety and their functions. Safety Guide RB100-15, Rostekhnadzor, 2015.

3. General provisions for the safety of nuclear power plants.Federal norms and rules in the field of atomic energy useNP 001-15, Rostekhnadzor, 2015.

4. NUREG/CR-2300, «PRA Procedures Guide», US NRC,January 1983.

5. NUREG/CR-2815, «Probabilistic Safety AnalysisProcedures Guide», US NRC, August 1985.

6. NUREG/CR-4550. Analysis of Core Damage Frequencyfrom Internal Events: Methodology Guidelines. Volume 1.US NRC, September 1987.

7. Development of guidelines for the implementation of taskswithin the PSA of levels 1 and 2 for all operational statesand categories of initiating events of power units of RBMK1000 NPPs. Guidelines for the development of PSA-1.Guidelines for the development of a database for VAB-1NPPs with RBMK-1000, taking into account data forequipment aging models. Guidelines for the analysis ofpersonnel reliability. Guidelines for the analysis of theuncertainty, significance and sensitivity of the results of thePSA-1 nuclear power plant with RBMK-1000: researchreport reg. No. 1562MY09 / Dmitriev A.V., Golubkov A.V.,Elizarov A.I., Berberova M.A., Derevyankin A.A. - M .:International Center for Nuclear Safety, 2009. - 287 p.

8. RiskSpectrum. [Electronic resource] – URL:http://www.riskspectrum.com/

9. On ensuring the uniformity of measurements: [Federal LawNo. 102-FZ dated 06/26/08: adopted by the State Duma onJune 11, 2008]. - M., 2008 . - 16 p.