PROBLEMS OF ANALYZING MICROSTRUCTURE IMAGES IN ASSESSING THE IMPACT OF TECHNOLOGICAL PARAMETERS OF COMBINED STRAIN WAVE HARDENING ON THE QUALITY OF THE SURFACE LAYER
Аннотация и ключевые слова
Аннотация (русский):
The problems of analyzing metallographic images and the method of their solution using modern software for the analysis of metallographic images are described. There is given an analysis of microstructure images as the main indicator of the surface layer quality by the example of studying the research results of strain wave hardening combinations and chemical-thermal treatment, in particular the influence of previous strain wave hardening and subsequent thermal and chemical- thermal treatment on the alloy steel microstructure or previous thermal and chemical- thermal treatment and subsequent strain wave hardening. On the basis of the analysis the effectiveness of strain wave hardening and chemical and thermal treatment is established.

Ключевые слова:
analysis, image, hardening, surface plastic deformation, surface layer, carburization, chemical and thermal treatment,microstructure
Список литературы

1. Kuts Yu.V., Povctyanoy А.Yu. Modern methods ofmicrostructure research with the help of computer materials scienceusing applied programs Naukovi Notatki, 2014, no.45, pp.323-329

2. Kirichek A.V., Solovyev D.L., Khandozhko А.V., FedoninaS.О. Technological support of carrying layer parameters bydeformation and combined strengthening. Science IntensiveTechnologies in Mechanical Engineering, 2018, no.10, vol. 88, pp.43-48

3. Kirichek A.V., Solovyev D.L., Silantyev S.A., Fedonina S.О.Influence of hardening by wave deformation on the materialmicrostructure. Science Intensive Technologies in MechanicalEngineering, 2019, no.4, vol. 94, pp.13-17.

4. Putyanin E.P. Image processing in robotics. Moscow.Mashinostroeniye, 1990. 320p.

5. Chichko А.N., Sachek О.А., Likhuzov S.G. Software andalgorithms for analyzing images of perlitic steel microstructures.Programmnye Produkty I Sistemy,2010, no.4, pp. 123-127

6. M. Andersson, B. Holmquist, J. Lindquist, O. Nilsson, K.G.Wahlund, Analysis of film coating thickness and surface area ofpharmaceutical pellets using fluorescence microscopy and imageanalysis, J. Pharm. Biomed. 22 (2000) P.325– 339

7. Bodla KK, Murthy JY, Garimella SV. Microtomography-basedsimulation of transport through open-cell metal foams. Numer HeatTransfer Part A 2010;58(7):527.

8. Mandelbrot B.B. The Fractal Geometry of Nature. –N.Y.:Freeman.-San Francisco.-1982., P.351

9. Stampfl J. Determination of the fracture toughness withautomatic image processing / Stampfl J., S.Scherer, M.Gruber,O.Kolednik: Int. J. Frac., V.2–44, 1996 – Р.139

10. Montminy M.D., Tannenbaum A, MacOsko C.W. The 3Dstructure of real polymer foams. J Colloid Interface Sci2004;280(1):202.

11. L.A. Feldkamp, L.C. Davis, J.W. Kress, Practical cone beamalgorithm, J. Microsc. 185 (1997) 67–75.

12. Whitehouse D. Handbook of Surface Metrology // Institute ofPhysics Publishing, Bristol and Philadelphia, 1994. –988 р.