graduate student
Voronezh, Voronezh, Russian Federation
UDK 630 Лесное хозяйство. Лесоводство
The paper provides an overview of studies of the working processes of disk working bodies of technological machines that provide soil cultivation at different stages of agriculture and forestry. The used designs of forest disk tillage implement have significant disadvantages, namely, insufficient depth of the disks, which results in soil cultivation of insufficient quality, as well as high dynamic loads when encountering various obstacles, which reduce the resource of the unit. The objective of the presented research is to improve the working processes of forestry disc plows by analyzing the properties of hydraulically driven cut-out discs in order to increase their efficiency. A mathematical model of a disk working body with hydraulically driven rear discs with cutouts for strip tillage in forest, root-saturated conditions has been developed. The maximum pressure values of the working fluid in the hydraulic system have been identified. When the angle of attack of the spherical disks changes from 0 to 300, the pressure of the working fluid decreases by 23%. With a further increase in the angle of attack to 450, the pressure of the working fluid increases by 15%, which indicates a nonlinear dependence of these parameters. The maximum traction resistance increases when the angle of attack of the spherical disk changes from 0 to 300 and increases by 29%, and after changing the angle of attack to 450 it increases by 11%. Using the derived formulas, it is possible to approximately determine the kinematic and dynamic parameters of disk working bodies that have cutouts on the cutting surface of the disk.
disk plow, hydraulic drive, cutting, disk with cutouts, work process, mathematical model
1. Raabe D.S., Begunov M.A., Koval' V.S., Chernyakov A.V., Korostelev D.N. Analiz diskovyh orudiy dlya poverhnostnoy obrabotki pochvy. [Analiz diskovyh orudiy dlya poverhnostnoy obrabotki pochvy]. Sovremennoe nauchnoe znanie v usloviyah sistemnyh izmeneniy, materialy Pyatoy nacional'noy nauchno-prakticheskoy konferencii. 2021: 136-145. (Na russkom yazyke). URL: https://www.elibrary.ru/item.asp?id=46544756
2. Malyukov S. V., Lisich M. N., Buhtoyarov L. D., Pozdnyakov E. V., Gnusov M. A., Shavkov M. V., Petkov A. F. Analiz diskovyh rabochih organov lesnyh pochvoobrabatyvayuschih orudiy. [Analiz diskovyh rabochih organov lesnyh pochvoobrabatyvayuschih orudiy]. Lesotehnicheskiy zhurnal = Forestry Engineering journal. 2023 2 (50): 128-141. (Na russkom yazyke). DOI: https://doi.org/10.34220/issn.2222-7962/2023.2/7
3. x Velikanov A. F., Filichkin A.E., Golovin A.Yu. Analiz osnovnyh parametrov diskovyh rabochih organov. [Analiz osnovnyh parametrov diskovyh rabochih organov]. Sbornik IV Vserossijskoj (nacional'noj) nauchno-prakticheskoj konferencii. =Sbornik materialov IV Vserossiyskoy nauchno-prakticheskoy konferencii. 2023: 29-32. (Na russkom yazyke). URL: https://www.elibrary.ru/item.asp?id=50436770
4. Priporov E.V. Analiz polnoty obrabotki pochvy v mezhdiskovom prostranstve dvuhslednogo diskovogo orudiya. [Analiz polnoty obrabotki pochvy v mezhdiskovom prostranstve dvuhkoleynogo diskovogo orudiya]. Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta = Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta. 2019: 85-88. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=37013939
5. Dolmatov S. N., Suhenko N.V. Vliyanie parametrov rabochego organa diskovogo pluga na tehnologicheskiy process narezki borozd pri lesovosstanovlenii. Vliyanie parametrov rabochego organa diskovogo ryhlitelya na tehnologicheskiy process narezaniya borozd pri lesovosstanovlenii. Hvoynye boreal'noy zony = Coniformes of the boreal zone. 2022: 529-537. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=50097037
6. Zimarin N.V., Chetverikova I. V. Issledovanie processa obrabotki pochvennogo plastika novym korpusom diska na neraskorchevannyh vyrubkah. [Issledovanie processa oborota pochvennogo plasta novym korpusom diskatora na nevspahannyh rubkah]. Resursy i tehnologii. 2021; 18:53-65. (Na russkom yazyke). DOI: https://doi.org/10.15393/j2.art.2021
7. Lisich M.N. Issledovanie processa obrabotki pochvy diskovym kul'tivatorom s ispol'zovaniem metoda disketnyh elementov. [Issledovanie processa obrabotki pochvy diskovym kul'tivatorom metodom diskretnyh elementov]. Sovremennye naukoemkie tehnologii = Modern high technology. 2022: 59-64. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=42596711
8. Gorobey V.P. Issledovanie tyagovogo protivodeystviya rabochego organa, pererabatyvayuschego orudiya truda s zubchatym diskovym nozhom. [Issledovanie tyagovogo soprotivleniya rabochego organa pochvoobrabatyvayuschego orudiya s zubchatym diskovym otvalom]. Mashinostroenie: innovacionnye aspekty razvitiya, materialy II mezhdunarodnoy nauchno-prakticheskoy konferencii. 2019: 90-93. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=37355236
9. Konovalov V.I., Konovalov S.I., Konovalov A.G. Kinematicheskiy analiz diskovogo rabochego organa s izmenyayuschimsya radiusom krivizny. [Kinematicheskiy analiz diskovogo rabochego organa s peremennym radiusom krivizny]. Politematicheskiy setevoy elektronnyy nauchnyy zhurnal Kubanskogo gosudarstvennogo agrarnogo universiteta = Politematicheskiy setevoy elektronnyy nauchnyy zhurnal Kubanskogo gosudarstvennogo agrarnogo universiteta. 2023: 22-34. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=50232296
10. Knyazev A. G., Kamalova N. S., Yudin R. V. Sistemnyy podhod k sravnitel'nomu analizu plugov dlya obrabotki pochvy pri lesovosstanovlenii. Sistemnyy podhod k sravnitel'nomu analizu plugov dlya obrabotki pochvy pri lesovosstanovlenii. Voronezhskiy nauchno-tehnicheskiy vestnik = Voronezhskiy nauchno-tehnicheskiy vestnik. 2023; 34: 23-29. (Na russkom yazyke). DOI: https://doi.org/10.34220/2311-8873-2021-4-4-23-29
11. Zimarin S.V. Novaya konstrukciya korpusa diskatora. [Novaya konstrukciya korpusa diskovoda]. Aktual'nye napravleniya nauchnyh issledovaniy XXI veka: teoriya i praktika = Current directions of scientific research of the xxi century: theory and practika. 2018: 315-321. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=36676661
12. Kruk I.S. [i dr.] Opredelenie kinematicheskih parametrov dvizheniya plasta po rabochey poverhnosti diskovogo pluga. [Opredelenie kinematicheskih parametrov peremescheniya sloya pochvy po rabochey poverhnosti diskovogo skimmera]. Agropanorama = Agropanorama. 2022; 4:14-18. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=49437343
13. Rudnev S. G., Tarasenko B. F., Drobot V. A., Sarksyan M. D. Opredelenie udel'nogo soprotivleniya diskovogo pluga. [Opredelenie udel'nogo soprotivleniya diskovogo pluga]. Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta = Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta. 2021; 6(92) : 141-146. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=47395390
14. Popikov P. I., Pozdnyakov A. K., Uskov V. I. [i dr.]. Teoreticheskoe issledovanie kinematicheskih i dinamicheskih harakteristik shnekovogo rabochego organa lesopozharnoy gruntometatel'noy mashiny. [Teoreticheskoe issledovanie kinematicheskih i dinamicheskih harakteristik shnekovogo rabochego organa lesopozharnoy gruntometatel'noy mashiny]. Lesotehnicheskiy zhurnal = Forestry Engineering journal. 2021; 3(43): 140-151. (Na russkom yazyke). DOI: https://doi.org/10.34220/issn.2222-7962/2021.3/12
15. Perfil'eva K.S. Tyagovoe soprotivlenie diskovogo rabochego organa. [Tyagovoe soprotivlenie diskovogo rabochego organa]. Studencheskaya nauka ob aktual'nyh problemah i perspektivah innovacionnogo razvitiya regional'nogo APK, Materialy XXI nauchno-prakticheskoy konferencii obuchayuschihsya = Student science on current problems and perspectives for innovative development of the regional agro-industrial complex, Materialy XXI nauchno-prakticheskoy konferencii studentov. 2022: 112-116. (Na rus.). URL: https://www.elibrary.ru/item.asp?id=48465955
16. Lopes-Vaskes A., Kadena-Sapata M., Kampos-Magan'ya S., Zermen'o-Gonsales A., Mendes-Dorado. M. Sravnenie ispol'zuemoy energii i vliyaniya na nasypnuyu plotnost' i urozhaynost' sistem obrabotki pochvy v poluzasushlivyh usloviyah Meksiki. Agronomiya. 2019; 9 (4): 189. DOI: http://dx.doi.org/10.3390/agronomy9040189
17. Shafai S. M., Loghavi M., Kamgar S. A. Sravnitel'noe issledovanie matematicheskih modeley i metoda intellektual'nogo analiza dannyh ANN dlya prognozirovaniya tyagovogo usiliya diskovogo pluzhnogo orudiya na glinisto-suglinistoy pochve. Mezhdunarodnyy zhurnal sel'skohozyaystvennoy inzhenerii CIGR. 2018; 20(2): 71-79.
18. Almaliki S. Modelirovanie tyagovogo usiliya dlya treh tipov plugov s ispol'zovaniem metoda poverhnosti otklika v razlichnyh polevyh usloviyah. Irakskiy zhurnal sel'skohozyaystvennyh nauk. 2018; 49(6): 1123-1124. DOI: https://doi.org/10.36103/ijas.v49i6.151
19. Yudina N.Yu., Yudin R.V., Maksimenkov A.I. Modelirovanie dinamiki nagruzheniya i gidrodinamiki privodov rabochih organov lesnyh mashin. V sbornike: Seriya konferenciy IOP: Nauka o zemle i okruzhayuschey srede. Ser. "Mezhdunarodnyy lesnoy forum "Lesnye ekosistemy kak global'nyy resurs biosfery: vyzovy, ugrozy, resheniya" 2021: 12060. DOI: https://doi.org/10.1088/1755-1315/875/1/012060
20. Uskov V. I. Nachal'no-kraevaya zadacha dlya vozmuschennyh differencial'nyh uravneniy v chastnyh proizvodnyh tret'ego poryadka. Zhurnal matematicheskih nauk.. 2021; 255(6): 779-789. DOI: https://doi.org/10.1007/s10958-021-05415-1.
21. Zubova S.P., Uskov V.I. Asimptoticheskoe reshenie zadachi Koshi dlya uravneniya pervogo poryadka s malym parametrom v banahovom prostranstve. Obychnyy sluchay. Matematicheskie zametki. 2018; 103:395-404. DOI: https://doi.org/10.1134/S0001434618030069