student
Yekaterinburg, Ekaterinburg, Russian Federation
employee
Yekaterinburg, Ekaterinburg, Russian Federation
student
Yekaterinburg, Ekaterinburg, Russian Federation
UDK 621.713.2 Посадки
BBK 344 Общее машиностроение. Машиноведение
One of the reasons for unforced train delays happen during the operation of 2ES6 freight electric locomotives is sliding down, gear cuts from the cone shanks of heavy electric motor shafts. The situation becomes worse when mechanical defects occur in the joints after pressing. Solving the problem is impossible without improving the fit technology. To simulate an interference fit, a finite element shaft-gear model is developed. A static analysis is performed in Simulation module of Solidworks, which includes an analysis of the stress-strain state and determination of the safety margin of objects according to several destruction criteria. Theoretical positions in conical joints are presented, in particular, the conditions of non-moving and strength of the joint. Based on simulation results, the range of diametrical interference values is adjusted, which ensures a favorable margin of gear safety.
electric locomotive, traction motor, shaft, gear, fit, simulation
1. Buynosov AP, Sharapov AT, Fedorov EV, Chepizhko MS. Determination of permissible values of interference when fitting a gear on 2ES6 electric locomotive shaft. Vestnik Transporta Povolzhya. 2022;6(96):7-13.
2. Chebotarev EA, Gubarev PV, Glazunov DV. Improving the reliability of traction gear transmission of freight electric locomotives. Sborka V Mashinostroenii, Priborostroenii. 2017;8:379-383.
3. Davydov YuA, Mukhin OO, Zabolotny VV. Study of gear interference fit on the armature shaft of a traction electric motor. Transport of the Asia-Pacific Region Scientific Journal. 2022;3(32):34-41.
4. Kurnosov NE, Tarnopolsky AV, Nakashidze YuYu. Aspects of ensuring tightness of interference fits in difficult operating conditions of products. Transport Engineering. 2022;7(7):24-33. DOIhttps://doi.org/10.30987/2782-5957-2022-7-24-33.
5. Kurnosov NE, Tarnopolsky AV, Nakashidze YuYu. Constructive and manufacturing provision of tightness of interference fits. Vestnik Mashinostroeniya. 2023;3:187-191. DOIhttps://doi.org/10.36652/0042-4633-2023-102-3-187-191.
6. Leonov OA, Shkaruba NZh, Vergazova YuG. Calculation of interference fit tolerance according to the parametric failure model. Vestnik Mashinostroeniya. 2019;4:23-26.
7. Leonov OA, Shkaruba NZh, Vergazova YuG. Calculation of interference fits under combined loading. Vestnik Mashinostroeniya. 2021;3:25-28. - DOIhttps://doi.org/10.36652/0042-2021-3-25-28.
8. 2ES6 freight electric locomotive: user manual. Part 6. Mechanical equipment and ventilation systems. Yekaterinburg: JSC UZZHM; 2010.
9. Help on Solidworks [Internet]. [cited 2023 Nov 15]. Available from: https://help.solidworks.com/2024/russian/SolidWorks/sldworks/r_welcome_sw_online_help.html.
10. Alyamovsky AA. Engineering calculations in SolidWorks Simulation. Moscow: DMK-Press; 2019.
