employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
UDK 629.454.22 Мягкие и купейные вагоны
BBK 392 Железнодорожный транспорт
At the first stage, a detailed dynamic solid-state model of a passenger car is developed which has a bolsterless truck. The dynamic model is a system of absolutely rigid bodies interconnected by elastically dissipative linear and nonlinear force elements, hinges and contact forces. The adequacy of the car dynamic model and the reliability of the results obtained are evaluated the results of running tests. Based on the developed solid-state dynamic model, a comprehensive study of the effect of the friction factor on the guide block support surfaces on the safety and dynamic performance of a passenger car under various modes of movement along the track, taking into account irregularities is carried out. As a result of modeling, a range of rational values of friction moments on the support guide blocks is obtained. The composition of the composite material for the support surfaces of the truck guide blocks is selected using neurocomputer modeling methods, the manufacture of the proposed composite material is tested, experimental studies of the characteristics of composite elements confirming their properties and safety were carried out.
car, truck, interaction, wheel pairs, dynamic model, guide blocks
1. Kobishanov VV, Lozbinev VP, Sakalo VI, Antipin DYa, Shorohov SG, Vysocky AM. Passenger Car Safety Prediction. World Applied Sciences Journal. 2013;24:208-212.
2. Iwnicki S. Handbook of railway vehicle dynamics. CRC Press; 2006.
3. Carlbom P. Carbody and passengers in rail vehicle dynamics [dissertation]. [Stockholm (Sw)]; 2000.
4. Orvnäs A. Methods for reducing vertical carbody vibrations of a rail vehicle. Report in Railway Technology. Stockholm; 2010.
5. Kovalev R, Yazykov V, Mikhalchenko G, Pogorelov D. Railway vehicle dynamics: some aspects of wheel-rail contact modeling and optimization of running gears. Mechanics Based Design of Structures and Machines. 2003;31:315-334.
6. Standards for the calculation and design of railcars of MPS 1520 mm gauge (non self-propelled). Moscow: GosNIIV - VNIIZhT; 1996.
7. Gorinov AV, Kantor II, Kondratchenko AP, Turbin AV. Research and design of railways: textbook for universities of railway transport. 6th ed. Moscow: Transport; 1979.
8. RD 32.68-96 Calculated irregularities of the railway track for use in the research and design of passenger and freight cars. Moscow: VNIIZHT; 1997s.
9. Markovets MP. Determination of mechanical properties of metals by hardness. Moscow: Mashinostroenie;1979.
